user/sven/linux.git/drivers/net, branch v4.14.39

virtio_net: fix adding vids on big-endian

2018-04-29T09:33:14Z

[ Upstream commit d7fad4c840f33a6bd333dd7fbb3006edbcf0017a ] Programming vids (adding or removing them) still passes guest-endian values in the DMA buffer. That's wrong if guest is big-endian and when virtio 1 is enabled. Note: this is on top of a previous patch: virtio_net: split out ctrl buffer Fixes: 9465a7a6f ("virtio_net: enable v1.0 support") Signed-off-by: Michael S. Tsirkin Acked-by: Jason Wang Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

virtio_net: split out ctrl buffer

2018-04-29T09:33:13Z

[ Upstream commit 12e571693837d6164bda61e316b1944972ee0d97 ] When sending control commands, virtio net sets up several buffers for DMA. The buffers are all part of the net device which means it's actually allocated by kvmalloc so it's in theory (on extreme memory pressure) possible to get a vmalloc'ed buffer which on some platforms means we can't DMA there. Fix up by moving the DMA buffers into a separate structure. Reported-by: Mikulas Patocka Suggested-by: Eric Dumazet Signed-off-by: Michael S. Tsirkin Acked-by: Jason Wang Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: ethernet: ti: cpsw: fix tx vlan priority mapping

2018-04-29T09:33:13Z

[ Upstream commit 5e391dc5a8d801a2410d0032ad4a428d1d61800c ] The CPDMA_TX_PRIORITY_MAP in real is vlan pcp field priority mapping register and basically replaces vlan pcp field for tagged packets. So, set it to be 1:1 mapping. Otherwise, it will cause unexpected change of egress vlan tagged packets, like prio 2 -> prio 5. Fixes: e05107e6b747 ("net: ethernet: ti: cpsw: add multi queue support") Reviewed-by: Grygorii Strashko Signed-off-by: Ivan Khoronzhuk Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

amd-xgbe: Only use the SFP supported transceiver signals

2018-04-29T09:33:13Z

[ Upstream commit 117df655f8ed51adb6e6b163812a06ebeae9f453 ] The SFP eeprom indicates the transceiver signals (Rx LOS, Tx Fault, etc.) that it supports. Update the driver to include checking the eeprom data when deciding whether to use a transceiver signal. Signed-off-by: Tom Lendacky Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

amd-xgbe: Improve KR auto-negotiation and training

2018-04-29T09:33:12Z

[ Upstream commit 96f4d430c507ed4856048c2dc9c1a2ea5b5e74e4 ] Update xgbe-phy-v2.c to make use of the auto-negotiation (AN) phy hooks to improve the ability to successfully complete Clause 73 AN when running at 10gbps. Hardware can sometimes have issues with CDR lock when the AN DME page exchange is being performed. The AN and KR training hooks are used as follows: - The pre AN hook is used to disable CDR tracking in the PHY so that the DME page exchange can be successfully and consistently completed. - The post KR training hook is used to re-enable the CDR tracking so that KR training can successfully complete. - The post AN hook is used to check for an unsuccessful AN which will increase a CDR tracking enablement delay (up to a maximum value). Add two debugfs entries to allow control over use of the CDR tracking workaround. The debugfs entries allow the CDR tracking workaround to be disabled and determine whether to re-enable CDR tracking before or after link training has been initiated. Also, with these changes the receiver reset cycle that is performed during the link status check can be performed less often. Signed-off-by: Tom Lendacky Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

amd-xgbe: Add pre/post auto-negotiation phy hooks

2018-04-29T09:33:12Z

[ Upstream commit 4d945663a6a0acf3cbe45940503f2eb9584bfee7 ] Add hooks to the driver auto-negotiation (AN) flow to allow the different phy implementations to perform any steps necessary to improve AN. Signed-off-by: Tom Lendacky Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

pppoe: check sockaddr length in pppoe_connect()

2018-04-29T09:33:12Z

[ Upstream commit a49e2f5d5fb141884452ddb428f551b123d436b5 ] We must validate sockaddr_len, otherwise userspace can pass fewer data than we expect and we end up accessing invalid data. Fixes: 224cf5ad14c0 ("ppp: Move the PPP drivers") Reported-by: syzbot+4f03bdf92fdf9ef5ddab@syzkaller.appspotmail.com Signed-off-by: Guillaume Nault Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

team: fix netconsole setup over team

2018-04-29T09:33:12Z

[ Upstream commit 9cf2f437ca5b39828984064fad213e68fc17ef11 ] The same fix in Commit dbe173079ab5 ("bridge: fix netconsole setup over bridge") is also needed for team driver. While at it, remove the unnecessary parameter *team from team_port_enable_netpoll(). v1->v2: - fix it in a better way, as does bridge. Fixes: 0fb52a27a04a ("team: cleanup netpoll clode") Reported-by: João Avelino Bellomo Filho Signed-off-by: Xin Long Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

team: avoid adding twice the same option to the event list

2018-04-29T09:33:11Z

[ Upstream commit 4fb0534fb7bbc2346ba7d3a072b538007f4135a5 ] When parsing the options provided by the user space, team_nl_cmd_options_set() insert them in a temporary list to send multiple events with a single message. While each option's attribute is correctly validated, the code does not check for duplicate entries before inserting into the event list. Exploiting the above, the syzbot was able to trigger the following splat: kernel BUG at lib/list_debug.c:31! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 0 PID: 4466 Comm: syzkaller556835 Not tainted 4.16.0+ #17 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__list_add_valid+0xaa/0xb0 lib/list_debug.c:29 RSP: 0018:ffff8801b04bf248 EFLAGS: 00010286 RAX: 0000000000000058 RBX: ffff8801c8fc7a90 RCX: 0000000000000000 RDX: 0000000000000058 RSI: ffffffff815fbf41 RDI: ffffed0036097e3f RBP: ffff8801b04bf260 R08: ffff8801b0b2a700 R09: ffffed003b604f90 R10: ffffed003b604f90 R11: ffff8801db027c87 R12: ffff8801c8fc7a90 R13: ffff8801c8fc7a90 R14: dffffc0000000000 R15: 0000000000000000 FS: 0000000000b98880(0000) GS:ffff8801db000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000043fc30 CR3: 00000001afe8e000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __list_add include/linux/list.h:60 [inline] list_add include/linux/list.h:79 [inline] team_nl_cmd_options_set+0x9ff/0x12b0 drivers/net/team/team.c:2571 genl_family_rcv_msg+0x889/0x1120 net/netlink/genetlink.c:599 genl_rcv_msg+0xc6/0x170 net/netlink/genetlink.c:624 netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2448 genl_rcv+0x28/0x40 net/netlink/genetlink.c:635 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline] netlink_unicast+0x58b/0x740 net/netlink/af_netlink.c:1336 netlink_sendmsg+0x9f0/0xfa0 net/netlink/af_netlink.c:1901 sock_sendmsg_nosec net/socket.c:629 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:639 ___sys_sendmsg+0x805/0x940 net/socket.c:2117 __sys_sendmsg+0x115/0x270 net/socket.c:2155 SYSC_sendmsg net/socket.c:2164 [inline] SyS_sendmsg+0x29/0x30 net/socket.c:2162 do_syscall_64+0x29e/0x9d0 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x4458b9 RSP: 002b:00007ffd1d4a7278 EFLAGS: 00000213 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 000000000000001b RCX: 00000000004458b9 RDX: 0000000000000010 RSI: 0000000020000d00 RDI: 0000000000000004 RBP: 00000000004a74ed R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000213 R12: 00007ffd1d4a7348 R13: 0000000000402a60 R14: 0000000000000000 R15: 0000000000000000 Code: 75 e8 eb a9 48 89 f7 48 89 75 e8 e8 d1 85 7b fe 48 8b 75 e8 eb bb 48 89 f2 48 89 d9 4c 89 e6 48 c7 c7 a0 84 d8 87 e8 ea 67 28 fe <0f> 0b 0f 1f 40 00 48 b8 00 00 00 00 00 fc ff df 55 48 89 e5 41 RIP: __list_add_valid+0xaa/0xb0 lib/list_debug.c:29 RSP: ffff8801b04bf248 This changeset addresses the avoiding list_add() if the current option is already present in the event list. Reported-and-tested-by: syzbot+4d4af685432dc0e56c91@syzkaller.appspotmail.com Signed-off-by: Paolo Abeni Fixes: 2fcdb2c9e659 ("team: allow to send multiple set events in one message") Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

bonding: do not set slave_dev npinfo before slave_enable_netpoll in bond_enslave

2018-04-29T09:33:10Z

[ Upstream commit ddea788c63094f7c483783265563dd5b50052e28 ] After Commit 8a8efa22f51b ("bonding: sync netpoll code with bridge"), it would set slave_dev npinfo in slave_enable_netpoll when enslaving a dev if bond->dev->npinfo was set. However now slave_dev npinfo is set with bond->dev->npinfo before calling slave_enable_netpoll. With slave_dev npinfo set, __netpoll_setup called in slave_enable_netpoll will not call slave dev's .ndo_netpoll_setup(). It causes that the lower dev of this slave dev can't set its npinfo. One way to reproduce it: # modprobe bonding # brctl addbr br0 # brctl addif br0 eth1 # ifconfig bond0 192.168.122.1/24 up # ifenslave bond0 eth2 # systemctl restart netconsole # ifenslave bond0 br0 # ifconfig eth2 down # systemctl restart netconsole The netpoll won't really work. This patch is to remove that slave_dev npinfo setting in bond_enslave(). Fixes: 8a8efa22f51b ("bonding: sync netpoll code with bridge") Signed-off-by: Xin Long Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman