user/sven/linux.git/drivers/net, branch v4.14.80

net: fs_enet: do not call phy_stop() in interrupts

2018-11-10T15:48:36Z

[ Upstream commit f8b39039cbf2a15f2b8c9f081e1cbd5dee00aaf5 ] In case of TX timeout, fs_timeout() calls phy_stop(), which triggers the following BUG_ON() as we are in interrupt. [92708.199889] kernel BUG at drivers/net/phy/mdio_bus.c:482! [92708.204985] Oops: Exception in kernel mode, sig: 5 [#1] [92708.210119] PREEMPT [92708.212107] CMPC885 [92708.214216] CPU: 0 PID: 3 Comm: ksoftirqd/0 Tainted: G W 4.9.61 #39 [92708.223227] task: c60f0a40 task.stack: c6104000 [92708.227697] NIP: c02a84bc LR: c02a947c CTR: c02a93d8 [92708.232614] REGS: c6105c70 TRAP: 0700 Tainted: G W (4.9.61) [92708.241193] MSR: 00021032 [92708.244818] CR: 24000822 XER: 20000000 [92708.248767] GPR00: c02a947c c6105d20 c60f0a40 c62b4c00 00000005 0000001f c069aad8 0001a688 GPR08: 00000007 00000100 c02a93d8 00000000 000005fc 00000000 c6213240 c06338e4 GPR16: 00000001 c06330d4 c0633094 00000000 c0680000 c6104000 c6104000 00000000 GPR24: 00000200 00000000 ffffffff 00000004 00000078 00009032 00000000 c62b4c00 NIP [c02a84bc] mdiobus_read+0x20/0x74 [92708.281517] LR [c02a947c] kszphy_config_intr+0xa4/0xc4 [92708.286547] Call Trace: [92708.288980] [c6105d20] [c6104000] 0xc6104000 (unreliable) [92708.294339] [c6105d40] [c02a947c] kszphy_config_intr+0xa4/0xc4 [92708.300098] [c6105d50] [c02a5330] phy_stop+0x60/0x9c [92708.305007] [c6105d60] [c02c84d0] fs_timeout+0xdc/0x110 [92708.310197] [c6105d80] [c035cd48] dev_watchdog+0x268/0x2a0 [92708.315593] [c6105db0] [c0060288] call_timer_fn+0x34/0x17c [92708.321014] [c6105dd0] [c00605f0] run_timer_softirq+0x21c/0x2e4 [92708.326887] [c6105e50] [c001e19c] __do_softirq+0xf4/0x2f4 [92708.332207] [c6105eb0] [c001e3c8] run_ksoftirqd+0x2c/0x40 [92708.337560] [c6105ec0] [c003b420] smpboot_thread_fn+0x1f0/0x258 [92708.343405] [c6105ef0] [c003745c] kthread+0xbc/0xd0 [92708.348217] [c6105f40] [c000c400] ret_from_kernel_thread+0x5c/0x64 [92708.354275] Instruction dump: [92708.357207] 7c0803a6 bbc10018 38210020 4e800020 7c0802a6 9421ffe0 54290024 bfc10018 [92708.364865] 90010024 7c7f1b78 81290008 552902ee <0f090000> 3bc3002c 7fc3f378 90810008 [92708.372711] ---[ end trace 42b05441616fafd7 ]--- This patch moves fs_timeout() actions into an async worker. Fixes: commit 48257c4f168e5 ("Add fs_enet ethernet network driver, for several embedded platforms") Signed-off-by: Christophe Leroy Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: bcmgenet: Poll internal PHY for GENETv5

2018-11-04T13:52:50Z

[ Upstream commit 64bd9c8135751b561f27edaaffe93d07093f81af ] On GENETv5, there is a hardware issue which prevents the GENET hardware from generating a link UP interrupt when the link is operating at 10Mbits/sec. Since we do not have any way to configure the link detection logic, fallback to polling in that case. Fixes: 421380856d9c ("net: bcmgenet: add support for the GENETv5 hardware") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net/mlx5e: fix csum adjustments caused by RXFCS

2018-11-04T13:52:50Z

[ Upstream commit d48051c5b8376038c2b287c3b1bd55b8d391d567 ] As shown by Dmitris, we need to use csum_block_add() instead of csum_add() when adding the FCS contribution to skb csum. Before 4.18 (more exactly commit 88078d98d1bb "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"), the whole skb csum was thrown away, so RXFCS changes were ignored. Then before commit d55bef5059dd ("net: fix pskb_trim_rcsum_slow() with odd trim offset") both mlx5 and pskb_trim_rcsum_slow() bugs were canceling each other. Now we fixed pskb_trim_rcsum_slow() we need to fix mlx5. Note that this patch also rewrites mlx5e_get_fcs() to : - Use skb_header_pointer() instead of reinventing it. - Use __get_unaligned_cpu32() to avoid possible non aligned accesses as Dmitris pointed out. Fixes: 902a545904c7 ("net/mlx5e: When RXFCS is set, add FCS data into checksum calculation") Reported-by: Paweł Staszewski Signed-off-by: Eric Dumazet Cc: Eran Ben Elisha Cc: Saeed Mahameed Cc: Dimitris Michailidis Cc: Cong Wang Cc: Paweł Staszewski Reviewed-by: Eran Ben Elisha Tested-By: Maria Pasechnik Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net/mlx5: Take only bit 24-26 of wqe.pftype_wq for page fault type

2018-11-04T13:52:50Z

[ Upstream commit a48bc513159d4767f9988f0d857b2b0c38a4d614 ] The HW spec defines only bits 24-26 of pftype_wq as the page fault type, use the required mask to ensure that. Fixes: d9aaed838765 ("{net,IB}/mlx5: Refactor page fault handling") Signed-off-by: Huy Nguyen Signed-off-by: Eli Cohen Signed-off-by: Saeed Mahameed Signed-off-by: Greg Kroah-Hartman

bonding: fix length of actor system

2018-11-04T13:52:49Z

[ Upstream commit 414dd6fb9a1a1b59983aea7bf0f79f0085ecc5b8 ] The attribute IFLA_BOND_AD_ACTOR_SYSTEM is sent to user space having the length of sizeof(bond->params.ad_actor_system) which is 8 byte. This patch aligns the length to ETH_ALEN to have the same MAC address exposed as using sysfs. Fixes: f87fda00b6ed2 ("bonding: prevent out of bound accesses") Signed-off-by: Tobias Jungel Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

virtio_net: avoid using netif_tx_disable() for serializing tx routine

2018-11-04T13:52:49Z

[ Upstream commit 05c998b738fdd3e5d6a257bcacc8f34b6284d795 ] Commit 713a98d90c5e ("virtio-net: serialize tx routine during reset") introduces netif_tx_disable() after netif_device_detach() in order to avoid use-after-free of tx queues. However, there are two issues. 1) Its operation is redundant with netif_device_detach() in case the interface is running. 2) In case of the interface is not running before suspending and resuming, the tx does not get resumed by netif_device_attach(). This results in losing network connectivity. It is better to use netif_tx_lock_bh()/netif_tx_unlock_bh() instead for serializing tx routine during reset. This also preserves the symmetry of netif_device_detach() and netif_device_attach(). Fixes commit 713a98d90c5e ("virtio-net: serialize tx routine during reset") Signed-off-by: Ake Koomsin Acked-by: Jason Wang Acked-by: Michael S. Tsirkin Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

r8169: fix NAPI handling under high load

2018-11-04T13:52:49Z

[ Upstream commit 6b839b6cf9eada30b086effb51e5d6076bafc761 ] rtl_rx() and rtl_tx() are called only if the respective bits are set in the interrupt status register. Under high load NAPI may not be able to process all data (work_done == budget) and it will schedule subsequent calls to the poll callback. rtl_ack_events() however resets the bits in the interrupt status register, therefore subsequent calls to rtl8169_poll() won't call rtl_rx() and rtl_tx() - chip interrupts are still disabled. Fix this by calling rtl_rx() and rtl_tx() independent of the bits set in the interrupt status register. Both functions will detect if there's nothing to do for them. Fixes: da78dbff2e05 ("r8169: remove work from irq handler.") Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: stmmac: Fix stmmac_mdio_reset() when building stmmac as modules

2018-11-04T13:52:49Z

[ Upstream commit 30549aab146ccb1275230c3b4b4bc6b4181fd54e ] When building stmmac, it is only possible to select CONFIG_DWMAC_GENERIC, or any of the glue drivers, when CONFIG_STMMAC_PLATFORM is set. The only exception is CONFIG_STMMAC_PCI. When calling of_mdiobus_register(), it will call our ->reset() callback, which is set to stmmac_mdio_reset(). Most of the code in stmmac_mdio_reset() is protected by a "#if defined(CONFIG_STMMAC_PLATFORM)", which will evaluate to false when CONFIG_STMMAC_PLATFORM=m. Because of this, the phy reset gpio will only be pulled when stmmac is built as built-in, but not when built as modules. Fix this by using "#if IS_ENABLED()" instead of "#if defined()". Signed-off-by: Niklas Cassel Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: fec: don't dump RX FIFO register when not available

2018-11-04T13:52:48Z

[ Upstream commit ec20a63aa8b8ec3223fb25cdb2a49f9f9dfda88c ] Commit db65f35f50e0 ("net: fec: add support of ethtool get_regs") introduce ethool "--register-dump" interface to dump all FEC registers. But not all silicon implementations of the Freescale FEC hardware module have the FRBR (FIFO Receive Bound Register) and FRSR (FIFO Receive Start Register) register, so we should not be trying to dump them on those that don't. To fix it we create a quirk flag, FEC_QUIRK_HAS_RFREG, and check it before dump those RX FIFO registers. Signed-off-by: Fugang Duan Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: ena: fix NULL dereference due to untimely napi initialization

2018-11-04T13:52:47Z

[ Upstream commit 78a55d05def95144ca5fa9a64c49b2a0636a9866 ] napi poll functions should be initialized before running request_irq(), to handle a rare condition where there is a pending interrupt, causing the ISR to fire immediately while the poll function wasn't set yet, causing a NULL dereference. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Arthur Kiyanovski Signed-off-by: David S. Miller Signed-off-by: Sasha Levin