user/sven/linux.git/drivers/net, branch v4.19.261

usbnet: Fix memory leak in usbnet_disconnect()

2022-10-05T08:36:45Z

[ Upstream commit a43206156263fbaf1f2b7f96257441f331e91bb7 ] Currently usbnet_disconnect() unanchors and frees all deferred URBs using usb_scuttle_anchored_urbs(), which does not free urb->context, causing a memory leak as reported by syzbot. Use a usb_get_from_anchor() while loop instead, similar to what we did in commit 19cfe912c37b ("Bluetooth: btusb: Fix memory leak in play_deferred"). Also free urb->sg. Reported-and-tested-by: syzbot+dcd3e13cf4472f2e0ba1@syzkaller.appspotmail.com Fixes: 69ee472f2706 ("usbnet & cdc-ether: Autosuspend for online devices") Fixes: 638c5115a794 ("USBNET: support DMA SG") Signed-off-by: Peilin Ye Link: https://lore.kernel.org/r/20220923042551.2745-1-yepeilin.cs@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: usb: qmi_wwan: Add new usb-id for Dell branded EM7455

2022-10-05T08:36:43Z

commit 797666cd5af041ffb66642fff62f7389f08566a2 upstream. Add support for Dell 5811e (EM7455) with USB-id 0x413c:0x81c2. Signed-off-by: Frank Wunderlich Cc: stable@vger.kernel.org Acked-by: Bjørn Mork Link: https://lore.kernel.org/r/20220926150740.6684-3-linux@fw-web.de Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: sunhme: Fix packet reception for len < RX_COPY_THRESHOLD

2022-09-28T09:02:57Z

[ Upstream commit 878e2405710aacfeeb19364c300f38b7a9abfe8f ] There is a separate receive path for small packets (under 256 bytes). Instead of allocating a new dma-capable skb to be used for the next packet, this path allocates a skb and copies the data into it (reusing the existing sbk for the next packet). There are two bytes of junk data at the beginning of every packet. I believe these are inserted in order to allow aligned DMA and IP headers. We skip over them using skb_reserve. Before copying over the data, we must use a barrier to ensure we see the whole packet. The current code only synchronizes len bytes, starting from the beginning of the packet, including the junk bytes. However, this leaves off the final two bytes in the packet. Synchronize the whole packet. To reproduce this problem, ping a HME with a payload size between 17 and 214 $ ping -s 17 which will complain rather loudly about the data mismatch. Small packets (below 60 bytes on the wire) do not have this issue. I suspect this is related to the padding added to increase the minimum packet size. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Sean Anderson Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20220920235018.1675956-1-seanga2@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

can: gs_usb: gs_can_open(): fix race dev->can.state condition

2022-09-28T09:02:56Z

[ Upstream commit 5440428b3da65408dba0241985acb7a05258b85e ] The dev->can.state is set to CAN_STATE_ERROR_ACTIVE, after the device has been started. On busy networks the CAN controller might receive CAN frame between and go into an error state before the dev->can.state is assigned. Assign dev->can.state before starting the controller to close the race window. Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Link: https://lore.kernel.org/all/20220920195216.232481-1-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

i40e: Fix set max_tx_rate when it is lower than 1 Mbps

2022-09-28T09:02:56Z

[ Upstream commit 198eb7e1b81d8ba676d0f4f120c092032ae69a8e ] While converting max_tx_rate from bytes to Mbps, this value was set to 0, if the original value was lower than 125000 bytes (1 Mbps). This would cause no transmission rate limiting to occur. This happened due to lack of check of max_tx_rate against the 1 Mbps value for max_tx_rate and the following division by 125000. Fix this issue by adding a helper i40e_bw_bytes_to_mbits() which sets max_tx_rate to minimum usable value of 50 Mbps, if its value is less than 1 Mbps, otherwise do the required conversion by dividing by 125000. Fixes: 5ecae4120a6b ("i40e: Refactor VF BW rate limiting") Signed-off-by: Michal Jaron Signed-off-by: Andrii Staikov Tested-by: Bharathi Sreenivas Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin

i40e: Fix VF set max MTU size

2022-09-28T09:02:56Z

[ Upstream commit 372539def2824c43b6afe2403045b140f65c5acc ] Max MTU sent to VF is set to 0 during memory allocation. It cause that max MTU on VF is changed to IAVF_MAX_RXBUFFER and does not depend on data from HW. Set max_mtu field in virtchnl_vf_resource struct to inform VF in GET_VF_RESOURCES msg what size should be max frame. Fixes: dab86afdbbd1 ("i40e/i40evf: Change the way we limit the maximum frame size for Rx") Signed-off-by: Michal Jaron Signed-off-by: Mateusz Palczewski Tested-by: Konrad Jankowski Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin

net: team: Unsync device addresses on ndo_stop

2022-09-28T09:02:56Z

[ Upstream commit bd60234222b2fd5573526da7bcd422801f271f5f ] Netdev drivers are expected to call dev_{uc,mc}_sync() in their ndo_set_rx_mode method and dev_{uc,mc}_unsync() in their ndo_stop method. This is mentioned in the kerneldoc for those dev_* functions. The team driver calls dev_{uc,mc}_unsync() during ndo_uninit instead of ndo_stop. This is ineffective because address lists (dev->{uc,mc}) have already been emptied in unregister_netdevice_many() before ndo_uninit is called. This mistake can result in addresses being leftover on former team ports after a team device has been deleted; see test_LAG_cleanup() in the last patch in this series. Add unsync calls at their expected location, team_close(). v3: * When adding or deleting a port, only sync/unsync addresses if the team device is up. In other cases, it is taken care of at the right time by ndo_open/ndo_set_rx_mode/ndo_stop. Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device") Signed-off-by: Benjamin Poirier Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

ipvlan: Fix out-of-bound bugs caused by unset skb->mac_header

2022-09-28T09:02:56Z

[ Upstream commit 81225b2ea161af48e093f58e8dfee6d705b16af4 ] If an AF_PACKET socket is used to send packets through ipvlan and the default xmit function of the AF_PACKET socket is changed from dev_queue_xmit() to packet_direct_xmit() via setsockopt() with the option name of PACKET_QDISC_BYPASS, the skb->mac_header may not be reset and remains as the initial value of 65535, this may trigger slab-out-of-bounds bugs as following: ================================================================= UG: KASAN: slab-out-of-bounds in ipvlan_xmit_mode_l2+0xdb/0x330 [ipvlan] PU: 2 PID: 1768 Comm: raw_send Kdump: loaded Not tainted 6.0.0-rc4+ #6 ardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 all Trace: print_address_description.constprop.0+0x1d/0x160 print_report.cold+0x4f/0x112 kasan_report+0xa3/0x130 ipvlan_xmit_mode_l2+0xdb/0x330 [ipvlan] ipvlan_start_xmit+0x29/0xa0 [ipvlan] __dev_direct_xmit+0x2e2/0x380 packet_direct_xmit+0x22/0x60 packet_snd+0x7c9/0xc40 sock_sendmsg+0x9a/0xa0 __sys_sendto+0x18a/0x230 __x64_sys_sendto+0x74/0x90 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd The root cause is: 1. packet_snd() only reset skb->mac_header when sock->type is SOCK_RAW and skb->protocol is not specified as in packet_parse_headers() 2. packet_direct_xmit() doesn't reset skb->mac_header as dev_queue_xmit() In this case, skb->mac_header is 65535 when ipvlan_xmit_mode_l2() is called. So when ipvlan_xmit_mode_l2() gets mac header with eth_hdr() which use "skb->head + skb->mac_header", out-of-bound access occurs. This patch replaces eth_hdr() with skb_eth_hdr() in ipvlan_xmit_mode_l2() and reset mac header in multicast to solve this out-of-bound bug. Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by: Lu Wei Reviewed-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

iavf: Fix cached head and tail value for iavf_get_tx_pending

2022-09-28T09:02:56Z

[ Upstream commit 809f23c0423a43266e47a7dc67e95b5cb4d1cbfc ] The underlying hardware may or may not allow reading of the head or tail registers and it really makes no difference if we use the software cached values. So, always used the software cached values. Fixes: 9c6c12595b73 ("i40e: Detection and recovery of TX queue hung logic moved to service_task from tx_timeout") Signed-off-by: Brett Creeley Co-developed-by: Norbert Zulinski Signed-off-by: Norbert Zulinski Signed-off-by: Mateusz Palczewski Tested-by: Konrad Jankowski Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin

net: usb: qmi_wwan: add Quectel RM520N

2022-09-28T09:02:53Z

[ Upstream commit e1091e226a2bab4ded1fe26efba2aee1aab06450 ] add support for Quectel RM520N which is based on Qualcomm SDX62 chip. 0x0801: DIAG + NMEA + AT + MODEM + RMNET T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0801 Rev= 5.04 S: Manufacturer=Quectel S: Product=RM520N-GL S: SerialNumber=384af524 C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: jerry.meng Acked-by: Bjørn Mork Link: https://lore.kernel.org/r/tencent_E50CA8A206904897C2D20DDAE90731183C05@qq.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin