user/sven/linux.git/drivers/net, branch v4.9.272

bnxt_en: Remove the setting of dev_port.

2021-06-10T10:42:37Z

commit 1d86859fdf31a0d50cc82b5d0d6bfb5fe98f6c00 upstream. The dev_port is meant to distinguish the network ports belonging to the same PCI function. Our devices only have one network port associated with each PCI function and so we should not set it for correctness. Signed-off-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Krzysztof Kozlowski Signed-off-by: Greg Kroah-Hartman

net: usb: cdc_ncm: don't spew notifications

2021-06-10T10:42:35Z

[ Upstream commit de658a195ee23ca6aaffe197d1d2ea040beea0a2 ] RTL8156 sends notifications about every 32ms. Only display/log notifications when something changes. This issue has been reported by others: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1832472 https://lkml.org/lkml/2020/8/27/1083 ... [785962.779840] usb 1-1: new high-speed USB device number 5 using xhci_hcd [785962.929944] usb 1-1: New USB device found, idVendor=0bda, idProduct=8156, bcdDevice=30.00 [785962.929949] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [785962.929952] usb 1-1: Product: USB 10/100/1G/2.5G LAN [785962.929954] usb 1-1: Manufacturer: Realtek [785962.929956] usb 1-1: SerialNumber: 000000001 [785962.991755] usbcore: registered new interface driver cdc_ether [785963.017068] cdc_ncm 1-1:2.0: MAC-Address: 00:24:27:88:08:15 [785963.017072] cdc_ncm 1-1:2.0: setting rx_max = 16384 [785963.017169] cdc_ncm 1-1:2.0: setting tx_max = 16384 [785963.017682] cdc_ncm 1-1:2.0 usb0: register 'cdc_ncm' at usb-0000:00:14.0-1, CDC NCM, 00:24:27:88:08:15 [785963.019211] usbcore: registered new interface driver cdc_ncm [785963.023856] usbcore: registered new interface driver cdc_wdm [785963.025461] usbcore: registered new interface driver cdc_mbim [785963.038824] cdc_ncm 1-1:2.0 enx002427880815: renamed from usb0 [785963.089586] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected [785963.121673] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected [785963.153682] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected ... This is about 2KB per second and will overwrite all contents of a 1MB dmesg buffer in under 10 minutes rendering them useless for debugging many kernel problems. This is also an extra 180 MB/day in /var/logs (or 1GB per week) rendering the majority of those logs useless too. When the link is up (expected state), spew amount is >2x higher: ... [786139.600992] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected [786139.632997] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink [786139.665097] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected [786139.697100] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink [786139.729094] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected [786139.761108] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink ... Chrome OS cannot support RTL8156 until this is fixed. Signed-off-by: Grant Grundler Reviewed-by: Hayes Wang Link: https://lore.kernel.org/r/20210120011208.3768105-1-grundler@chromium.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: bnx2: Fix error return code in bnx2_init_board()

2021-06-03T06:23:32Z

[ Upstream commit 28c66b6da4087b8cfe81c2ec0a46eb6116dafda9 ] Fix to return -EPERM from the error handling case instead of 0, as done elsewhere in this function. Fixes: b6016b767397 ("[BNX2]: New Broadcom gigabit network driver.") Reported-by: Hulk Robot Signed-off-by: Zhen Lei Reviewed-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: mdio: octeon: Fix some double free issues

2021-06-03T06:23:32Z

[ Upstream commit e1d027dd97e1e750669cdc0d3b016a4f54e473eb ] 'bus->mii_bus' has been allocated with 'devm_mdiobus_alloc_size()' in the probe function. So it must not be freed explicitly or there will be a double free. Remove the incorrect 'mdiobus_free' in the error handling path of the probe function and in remove function. Suggested-By: Andrew Lunn Fixes: 35d2aeac9810 ("phy: mdio-octeon: Use devm_mdiobus_alloc_size()") Signed-off-by: Christophe JAILLET Reviewed-by: Russell King Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: mdio: thunder: Fix a double free issue in the .remove function

2021-06-03T06:23:32Z

[ Upstream commit a93a0a15876d2a077a3bc260b387d2457a051f24 ] 'bus->mii_bus' have been allocated with 'devm_mdiobus_alloc_size()' in the probe function. So it must not be freed explicitly or there will be a double free. Remove the incorrect 'mdiobus_free' in the remove function. Fixes: 379d7ac7ca31 ("phy: mdio-thunder: Add driver for Cavium Thunder SoC MDIO buses.") Signed-off-by: Christophe JAILLET Reviewed-by: Russell King Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: netcp: Fix an error message

2021-06-03T06:23:32Z

[ Upstream commit ddb6e00f8413e885ff826e32521cff7924661de0 ] 'ret' is known to be 0 here. The expected error code is stored in 'tx_pipe->dma_queue', so use it instead. While at it, switch from %d to %pe which is more user friendly. Fixes: 84640e27f230 ("net: netcp: Add Keystone NetCP core ethernet driver") Signed-off-by: Christophe JAILLET Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

libertas: register sysfs groups properly

2021-06-03T06:23:31Z

[ Upstream commit 7e79b38fe9a403b065ac5915465f620a8fb3de84 ] The libertas driver was trying to register sysfs groups "by hand" which causes them to be created _after_ the device is initialized and announced to userspace, which causes races and can prevent userspace tools from seeing the sysfs files correctly. Fix this up by using the built-in sysfs_groups pointers in struct net_device which were created for this very reason, fixing the race condition, and properly allowing for any error that might have occured to be handled properly. Cc: Kalle Valo Link: https://lore.kernel.org/r/20210503115736.2104747-54-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

net: caif: remove BUG_ON(dev == NULL) in caif_xmit

2021-06-03T06:23:31Z

[ Upstream commit 65a67792e3416f7c5d7daa47d99334cbb19a7449 ] The condition of dev == NULL is impossible in caif_xmit(), hence it is for the removal. Explanation: The static caif_xmit() is only called upon via a function pointer `ndo_start_xmit` defined in include/linux/netdevice.h: ``` struct net_device_ops { ... netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev); ... } ``` The exhausive list of call points are: ``` drivers/net/ethernet/qualcomm/rmnet/rmnet_map_command.c dev->netdev_ops->ndo_start_xmit(skb, dev); ^ ^ drivers/infiniband/ulp/opa_vnic/opa_vnic_netdev.c struct opa_vnic_adapter *adapter = opa_vnic_priv(netdev); ^ ^ return adapter->rn_ops->ndo_start_xmit(skb, netdev); // adapter would crash first ^ ^ drivers/usb/gadget/function/f_ncm.c ncm->netdev->netdev_ops->ndo_start_xmit(NULL, ncm->netdev); ^ ^ include/linux/netdevice.h static inline netdev_tx_t __netdev_start_xmit(... { return ops->ndo_start_xmit(skb, dev); ^ } const struct net_device_ops *ops = dev->netdev_ops; ^ rc = __netdev_start_xmit(ops, skb, dev, more); ^ ``` In each of the enumerated scenarios, it is impossible for the NULL-valued dev to reach the caif_xmit() without crashing the kernel earlier, therefore `BUG_ON(dev == NULL)` is rather useless, hence the removal. Cc: David S. Miller Signed-off-by: Du Cheng Link: https://lore.kernel.org/r/20210503115736.2104747-20-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

net: fujitsu: fix potential null-ptr-deref

2021-06-03T06:23:31Z

[ Upstream commit 52202be1cd996cde6e8969a128dc27ee45a7cb5e ] In fmvj18x_get_hwinfo(), if ioremap fails there will be NULL pointer deref. To fix this, check the return value of ioremap and return -1 to the caller in case of failure. Cc: "David S. Miller" Acked-by: Dominik Brodowski Signed-off-by: Anirudh Rayabharam Link: https://lore.kernel.org/r/20210503115736.2104747-16-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

net/mlx4: Fix EEPROM dump support

2021-06-03T06:23:30Z

commit db825feefc6868896fed5e361787ba3bee2fd906 upstream. Fix SFP and QSFP* EEPROM queries by setting i2c_address, offset and page number correctly. For SFP set the following params: - I2C address for offsets 0-255 is 0x50. For 256-511 - 0x51. - Page number is zero. - Offset is 0-255. At the same time, QSFP* parameters are different: - I2C address is always 0x50. - Page number is not limited to zero. - Offset is 0-255 for page zero and 128-255 for others. To set parameters accordingly to cable used, implement function to query module ID and implement respective helper functions to set parameters correctly. Fixes: 135dd9594f12 ("net/mlx4_en: ethtool, Remove unsupported SFP EEPROM high pages query") Signed-off-by: Vladyslav Tarasiuk Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman