user/sven/linux.git/drivers/net, branch v4.9.302

bonding: pair enable_port with slave_arr_updates

2022-02-16T11:43:53Z

[ Upstream commit 23de0d7b6f0e3f9a6283a882594c479949da1120 ] When 803.2ad mode enables a participating port, it should update the slave-array. I have observed that the member links are participating and are part of the active aggregator while the traffic is egressing via only one member link (in a case where two links are participating). Via kprobes I discovered that slave-arr has only one link added while the other participating link wasn't part of the slave-arr. I couldn't see what caused that situation but the simple code-walk through provided me hints that the enable_port wasn't always associated with the slave-array update. Fixes: ee6377147409 ("bonding: Simplify the xmit function for modes that use xmit_hash") Signed-off-by: Mahesh Bandewar Acked-by: Jay Vosburgh Link: https://lore.kernel.org/r/20220207222901.1795287-1-maheshb@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

Revert "net: axienet: Wait for PhyRstCmplt after core reset"

2022-02-16T11:43:52Z

This reverts commit 9f1a3c13342b4d96b9baa337ec5fb7d453828709. The upstream commit b400c2f4f4c5 ("net: axienet: Wait for PhyRstCmplt after core reset") add new instructions in the `__axienet_device_reset` function to wait until PhyRstCmplt bit is set, and return a non zero-exit value if this exceeds a timeout. However, its backported version in 4.9 (commit 9f1a3c13342b ("net: axienet: Wait for PhyRstCmplt after core reset")) insert these instructions in `axienet_dma_bd_init` instead. Unlike upstream, the version of `__axienet_device_reset` currently present in branch stable/linux-4.9.y does not return an integer for error codes. Therefore fixing the backport cannot be as simple as moving the inserted instructions in the right place, and we simply revert it instead. Fixes: 9f1a3c13342b ("net: axienet: Wait for PhyRstCmplt after core reset") Signed-off-by: Guillaume Bertholon Signed-off-by: Greg Kroah-Hartman

net: macsec: Verify that send_sci is on when setting Tx sci explicitly

2022-02-08T17:15:29Z

commit d0cfa548dbde354de986911d3913897b5448faad upstream. When setting Tx sci explicit, the Rx side is expected to use this sci and not recalculate it from the packet.However, in case of Tx sci is explicit and send_sci is off, the receiver is wrongly recalculate the sci from the source MAC address which most likely be different than the explicit sci. Fix by preventing such configuration when macsec newlink is established and return EINVAL error code on such cases. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Lior Nahmanson Reviewed-by: Raed Salem Signed-off-by: Raed Salem Link: https://lore.kernel.org/r/1643542672-29403-1-git-send-email-raeds@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: amd-xgbe: Fix skb data length underflow

2022-02-08T17:15:28Z

commit 5aac9108a180fc06e28d4e7fb00247ce603b72ee upstream. There will be BUG_ON() triggered in include/linux/skbuff.h leading to intermittent kernel panic, when the skb length underflow is detected. Fix this by dropping the packet if such length underflows are seen because of inconsistencies in the hardware descriptors. Fixes: 622c36f143fc ("amd-xgbe: Fix jumbo MTU processing on newer hardware") Suggested-by: Tom Lendacky Signed-off-by: Shyam Sundar S K Acked-by: Tom Lendacky Link: https://lore.kernel.org/r/20220127092003.2812745-1-Shyam-sundar.S-k@amd.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: amd-xgbe: ensure to reset the tx_timer_active flag

2022-02-08T17:15:28Z

commit 7674b7b559b683478c3832527c59bceb169e701d upstream. Ensure to reset the tx_timer_active flag in xgbe_stop(), otherwise a port restart may result in tx timeout due to uncleared flag. Fixes: c635eaacbf77 ("amd-xgbe: Remove Tx coalescing") Co-developed-by: Sudheesh Mavila Signed-off-by: Sudheesh Mavila Signed-off-by: Raju Rangoju Acked-by: Tom Lendacky Link: https://lore.kernel.org/r/20220127060222.453371-1-Raju.Rangoju@amd.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

ipheth: fix EOVERFLOW in ipheth_rcvbulk_callback

2022-02-08T17:15:28Z

commit 63e4b45c82ed1bde979da7052229a4229ce9cabf upstream. When rx_buf is allocated we need to account for IPHETH_IP_ALIGN, which reduces the usable size by 2 bytes. Otherwise we have 1512 bytes usable instead of 1514, and if we receive more than 1512 bytes, ipheth_rcvbulk_callback is called with status -EOVERFLOW, after which the driver malfunctiones and all communication stops. Resolves ipheth 2-1:4.2: ipheth_rcvbulk_callback: urb status: -75 Fixes: f33d9e2b48a3 ("usbnet: ipheth: fix connectivity with iOS 14") Signed-off-by: Georgi Valkov Tested-by: Jan Kiszka Link: https://lore.kernel.org/all/B60B8A4B-92A0-49B3-805D-809A2433B46C@abv.bg/ Link: https://lore.kernel.org/all/24851bd2769434a5fc24730dce8e8a984c5a4505.1643699778.git.jan.kiszka@siemens.com/ Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

gianfar: fix jumbo packets+napi+rx overrun crash

2022-01-27T07:47:42Z

commit d8861bab48b6c1fc3cdbcab8ff9d1eaea43afe7f upstream. When using jumbo packets and overrunning rx queue with napi enabled, the following sequence is observed in gfar_add_rx_frag: | lstatus | | skb | t | lstatus, size, flags | first | len, data_len, *ptr | ---+--------------------------------------+-------+-----------------------+ 13 | 18002348, 9032, INTERRUPT LAST | 0 | 9600, 8000, f554c12e | 12 | 10000640, 1600, INTERRUPT | 0 | 8000, 6400, f554c12e | 11 | 10000640, 1600, INTERRUPT | 0 | 6400, 4800, f554c12e | 10 | 10000640, 1600, INTERRUPT | 0 | 4800, 3200, f554c12e | 09 | 10000640, 1600, INTERRUPT | 0 | 3200, 1600, f554c12e | 08 | 14000640, 1600, INTERRUPT FIRST | 0 | 1600, 0, f554c12e | 07 | 14000640, 1600, INTERRUPT FIRST | 1 | 0, 0, f554c12e | 06 | 1c000080, 128, INTERRUPT LAST FIRST | 1 | 0, 0, abf3bd6e | 05 | 18002348, 9032, INTERRUPT LAST | 0 | 8000, 6400, c5a57780 | 04 | 10000640, 1600, INTERRUPT | 0 | 6400, 4800, c5a57780 | 03 | 10000640, 1600, INTERRUPT | 0 | 4800, 3200, c5a57780 | 02 | 10000640, 1600, INTERRUPT | 0 | 3200, 1600, c5a57780 | 01 | 10000640, 1600, INTERRUPT | 0 | 1600, 0, c5a57780 | 00 | 14000640, 1600, INTERRUPT FIRST | 1 | 0, 0, c5a57780 | So at t=7 a new packets is started but not finished, probably due to rx overrun - but rx overrun is not indicated in the flags. Instead a new packets starts at t=8. This results in skb->len to exceed size for the LAST fragment at t=13 and thus a negative fragment size added to the skb. This then crashes: kernel BUG at include/linux/skbuff.h:2277! Oops: Exception in kernel mode, sig: 5 [#1] ... NIP [c04689f4] skb_pull+0x2c/0x48 LR [c03f62ac] gfar_clean_rx_ring+0x2e4/0x844 Call Trace: [ec4bfd38] [c06a84c4] _raw_spin_unlock_irqrestore+0x60/0x7c (unreliable) [ec4bfda8] [c03f6a44] gfar_poll_rx_sq+0x48/0xe4 [ec4bfdc8] [c048d504] __napi_poll+0x54/0x26c [ec4bfdf8] [c048d908] net_rx_action+0x138/0x2c0 [ec4bfe68] [c06a8f34] __do_softirq+0x3a4/0x4fc [ec4bfed8] [c0040150] run_ksoftirqd+0x58/0x70 [ec4bfee8] [c0066ecc] smpboot_thread_fn+0x184/0x1cc [ec4bff08] [c0062718] kthread+0x140/0x144 [ec4bff38] [c0012350] ret_from_kernel_thread+0x14/0x1c This patch fixes this by checking for computed LAST fragment size, so a negative sized fragment is never added. In order to prevent the newer rx frame from getting corrupted, the FIRST flag is checked to discard the incomplete older frame. Signed-off-by: Michael Braun Signed-off-by: David S. Miller Cc: Ben Hutchings Signed-off-by: Greg Kroah-Hartman

gianfar: simplify FCS handling and fix memory leak

2022-01-27T07:47:42Z

commit d903ec77118c09f93a610b384d83a6df33a64fe6 upstream. Previously, buffer descriptors containing only the frame check sequence (FCS) were skipped and not added to the skb. However, the page reference count was still incremented, leading to a memory leak. Fixing this inside gfar_add_rx_frag() is difficult due to reserved memory handling and page reuse. Instead, move the FCS handling to gfar_process_frame() and trim off the FCS before passing the skb up the networking stack. Signed-off-by: Andy Spencer Signed-off-by: Jim Gruen Signed-off-by: David S. Miller Cc: Ben Hutchings Signed-off-by: Greg Kroah-Hartman

lib82596: Fix IRQ check in sni_82596_probe

2022-01-27T07:47:42Z

commit 99218cbf81bf21355a3de61cd46a706d36e900e6 upstream. platform_get_irq() returns negative error number instead 0 on failure. And the doc of platform_get_irq() provides a usage example: int irq = platform_get_irq(pdev, 0); if (irq < 0) return irq; Fix the check of return value to catch errors correctly. Fixes: 115978859272 ("i825xx: Move the Intel 82586/82593/82596 based drivers") Signed-off-by: Miaoqian Lin Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

bcmgenet: add WOL IRQ check

2022-01-27T07:47:42Z

commit 9deb48b53e7f4056c2eaa2dc2ee3338df619e4f6 upstream. The driver neglects to check the result of platform_get_irq_optional()'s call and blithely passes the negative error codes to devm_request_irq() (which takes *unsigned* IRQ #), causing it to fail with -EINVAL. Stop calling devm_request_irq() with the invalid IRQ #s. Fixes: 8562056f267d ("net: bcmgenet: request Wake-on-LAN interrupt") Signed-off-by: Sergey Shtylyov Acked-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman