user/sven/linux.git/drivers/net, branch v5.8.11

hv_netvsc: Remove "unlikely" from netvsc_select_queue

2020-09-23T10:59:49Z

commit 4d820543c54c47a2bd3c95ddbf52f83c89a219a0 upstream. When using vf_ops->ndo_select_queue, the number of queues of VF is usually bigger than the synthetic NIC. This condition may happen often. Remove "unlikely" from the comparison of ndev->real_num_tx_queues. Fixes: b3bf5666a510 ("hv_netvsc: defer queue selection to VF") Signed-off-by: Haiyang Zhang Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

drivers/net/wan/hdlc: Change the default of hard_header_len to 0

2020-09-17T11:55:37Z

[ Upstream commit 2b7bcd967a0f5b7ac9bb0c37b92de36e073dd119 ] Change the default value of hard_header_len in hdlc.c from 16 to 0. Currently there are 6 HDLC protocol drivers, among them: hdlc_raw_eth, hdlc_cisco, hdlc_ppp, hdlc_x25 set hard_header_len when attaching the protocol, overriding the default. So this patch does not affect them. hdlc_raw and hdlc_fr don't set hard_header_len when attaching the protocol. So this patch will change the hard_header_len of the HDLC device for them from 16 to 0. This is the correct change because both hdlc_raw and hdlc_fr don't have header_ops, and the code in net/packet/af_packet.c expects the value of hard_header_len to be consistent with header_ops. In net/packet/af_packet.c, in the packet_snd function, for AF_PACKET/DGRAM sockets it would reserve a headroom of hard_header_len and call dev_hard_header to fill in that headroom, and for AF_PACKET/RAW sockets, it does not reserve the headroom and does not call dev_hard_header, but checks if the user has provided a header of length hard_header_len (in function dev_validate_header). Cc: Krzysztof Halasa Cc: Martin Schiller Signed-off-by: Xie He Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

drivers/net/wan/hdlc_cisco: Add hard_header_len

2020-09-17T11:55:36Z

[ Upstream commit 1a545ebe380bf4c1433e3c136e35a77764fda5ad ] This driver didn't set hard_header_len. This patch sets hard_header_len for it according to its header_ops->create function. This driver's header_ops->create function (cisco_hard_header) creates a header of (struct hdlc_header), so hard_header_len should be set to sizeof(struct hdlc_header). Cc: Martin Schiller Signed-off-by: Xie He Acked-by: Krzysztof Halasa Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

drivers/net/wan/lapbether: Set network_header before transmitting

2020-09-17T11:55:33Z

[ Upstream commit 91244d108441013b7367b3b4dcc6869998676473 ] Set the skb's network_header before it is passed to the underlying Ethernet device for transmission. This patch fixes the following issue: When we use this driver with AF_PACKET sockets, there would be error messages of: protocol 0805 is buggy, dev (Ethernet interface name) printed in the system "dmesg" log. This is because skbs passed down to the Ethernet device for transmission don't have their network_header properly set, and the dev_queue_xmit_nit function in net/core/dev.c complains about this. Reason of setting the network_header to this place (at the end of the Ethernet header, and at the beginning of the Ethernet payload): Because when this driver receives an skb from the Ethernet device, the network_header is also set at this place. Cc: Martin Schiller Signed-off-by: Xie He Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: hns3: Fix for geneve tx checksum bug

2020-09-17T11:55:33Z

[ Upstream commit a156998fc92d3859c8e820f1583f6d0541d643c3 ] when skb->encapsulation is 0, skb->ip_summed is CHECKSUM_PARTIAL and it is udp packet, which has a dest port as the IANA assigned. the hardware is expected to do the checksum offload, but the hardware will not do the checksum offload when udp dest port is 6081. This patch fixes it by doing the checksum in software. Reported-by: Li Bing Signed-off-by: Yi Li Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

drivers/net/wan/lapbether: Added needed_tailroom

2020-09-17T11:55:32Z

[ Upstream commit 1ee39c1448c4e0d480c5b390e2db1987561fb5c2 ] The underlying Ethernet device may request necessary tailroom to be allocated by setting needed_tailroom. This driver should also set needed_tailroom to request the tailroom needed by the underlying Ethernet device to be allocated. Cc: Willem de Bruijn Cc: Martin Schiller Signed-off-by: Xie He Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: usb: dm9601: Add USB ID of Keenetic Plus DSL

2020-09-12T12:22:13Z

[ Upstream commit a609d0259183a841621f252e067f40f8cc25d6f6 ] Keenetic Plus DSL is a xDSL modem that uses dm9620 as its USB interface. Signed-off-by: Kamil Lorenc Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: usb: Fix uninit-was-stored issue in asix_read_phy_addr()

2020-09-09T17:14:34Z

commit a092b7233f0e000cc6f2c71a49e2ecc6f917a5fc upstream. The buffer size is 2 Bytes and we expect to receive the same amount of data. But sometimes we receive less data and run into uninit-was-stored issue upon read. Hence modify the error check on the return value to match with the buffer size as a prevention. Reported-and-tested by: syzbot+a7e220df5a81d1ab400e@syzkaller.appspotmail.com Signed-off-by: Himadri Pandya Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

tg3: Fix soft lockup when tg3_reset_task() fails.

2020-09-09T17:14:22Z

[ Upstream commit 556699341efa98243e08e34401b3f601da91f5a3 ] If tg3_reset_task() fails, the device state is left in an inconsistent state with IFF_RUNNING still set but NAPI state not enabled. A subsequent operation, such as ifdown or AER error can cause it to soft lock up when it tries to disable NAPI state. Fix it by bringing down the device to !IFF_RUNNING state when tg3_reset_task() fails. tg3_reset_task() running from workqueue will now call tg3_close() when the reset fails. We need to modify tg3_reset_task_cancel() slightly to avoid tg3_close() calling cancel_work_sync() to cancel tg3_reset_task(). Otherwise cancel_work_sync() will wait forever for tg3_reset_task() to finish. Reported-by: David Christensen Reported-by: Baptiste Covolato Fixes: db2199737990 ("tg3: Schedule at most one tg3_reset_task run") Signed-off-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: dp83867: Fix WoL SecureOn password

2020-09-09T17:14:21Z

[ Upstream commit 8b4a11c67da538504d60ae917ffe5254f59b1248 ] Fix the registers being written to as the values were being over written when writing the same registers. Fixes: caabee5b53f5 ("net: phy: dp83867: support Wake on LAN") Signed-off-by: Dan Murphy Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Sasha Levin