user/sven/linux.git/drivers/net, branch v5.9.8

r8169: work around short packet hw bug on RTL8125

2020-11-10T11:38:59Z

[ Upstream commit 2aaf09a0e7842b3ac7be6e0b8fb1888b3daeb3b3 ] Network problems with RTL8125B have been reported [0] and with help from Realtek it turned out that this chip version has a hw problem with short packets (similar to RTL8168evl). Having said that activate the same workaround as for RTL8168evl. Realtek suggested to activate the workaround for RTL8125A too, even though they're not 100% sure yet which RTL8125 versions are affected. [0] https://bugzilla.kernel.org/show_bug.cgi?id=209839 Fixes: 0439297be951 ("r8169: add support for RTL8125B") Reported-by: Maxim Plotnikov Tested-by: Maxim Plotnikov Signed-off-by: Heiner Kallweit Link: https://lore.kernel.org/r/8002c31a-60b9-58f1-f0dd-8fd07239917f@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: dsa: qca8k: Fix port MTU setting

2020-11-10T11:38:58Z

[ Upstream commit 99cab7107d914a71c57f5a4e6d34292425fbbb61 ] The qca8k only supports a switch-wide MTU setting, and the code to take the max of all ports was only looking at the port currently being set. Fix to examine all ports. Reported-by: DENG Qingfang Fixes: f58d2598cf70 ("net: dsa: qca8k: implement the port MTU callbacks") Signed-off-by: Jonathan McDowell Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20201030183315.GA6736@earth.li Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: fec: fix MDIO probing for some FEC hardware blocks

2020-11-10T11:38:58Z

[ Upstream commit 1e6114f51f9d4090390fcec2f5d67d8cc8dc4bfc ] Some (apparently older) versions of the FEC hardware block do not like the MMFR register being cleared to avoid generation of MII events at initialization time. The action of clearing this register results in no future MII events being generated at all on the problem block. This means the probing of the MDIO bus will find no PHYs. Create a quirk that can be checked at the FECs MII init time so that the right thing is done. The quirk is set as appropriate for the FEC hardware blocks that are known to need this. Fixes: f166f890c8f0 ("net: ethernet: fec: Replace interrupt driven MDIO with polled IO") Signed-off-by: Greg Ungerer Acked-by: Fugang Duan Tested-by: Andrew Lunn Tested-by: Clemens Gruber Link: https://lore.kernel.org/r/20201028052232.1315167-1-gerg@linux-m68k.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

sfp: Fix error handing in sfp_probe()

2020-11-10T11:38:58Z

[ Upstream commit 9621618130bf7e83635367c13b9a6ee53935bb37 ] gpiod_to_irq() never return 0, but returns negative in case of error, check it and set gpio_irq to 0. Fixes: 73970055450e ("sfp: add SFP module support") Signed-off-by: YueHaibing Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20201031031053.25264-1-yuehaibing@huawei.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

powerpc/vnic: Extend "failover pending" window

2020-11-10T11:38:57Z

[ Upstream commit 1d8504937478fdc2f3ef2174a816fd3302eca882 ] Commit 5a18e1e0c193b introduced the 'failover_pending' state to track the "failover pending window" - where we wait for the partner to become ready (after a transport event) before actually attempting to failover. i.e window is between following two events: a. we get a transport event due to a FAILOVER b. later, we get CRQ_INITIALIZED indicating the partner is ready at which point we schedule a FAILOVER reset. and ->failover_pending is true during this window. If during this window, we attempt to open (or close) a device, we pretend that the operation succeded and let the FAILOVER reset path complete the operation. This is fine, except if the transport event ("a" above) occurs during the open and after open has already checked whether a failover is pending. If that happens, we fail the open, which can cause the boot scripts to leave the interface down requiring administrator to manually bring up the device. This fix "extends" the failover pending window till we are _actually_ ready to perform the failover reset (i.e until after we get the RTNL lock). Since open() holds the RTNL lock, we can be sure that we either finish the open or if the open() fails due to the failover pending window, we can again pretend that open is done and let the failover complete it. We could try and block the open until failover is completed but a) that could still timeout the application and b) Existing code "pretends" that failover occurred "just after" open succeeded, so marks the open successful and lets the failover complete the open. So, mark the open successful even if the transport event occurs before we actually start the open. Fixes: 5a18e1e0c193 ("ibmvnic: Fix failover case for non-redundant configuration") Signed-off-by: Sukadev Bhattiprolu Acked-by: Dany Madden Link: https://lore.kernel.org/r/20201030170711.1562994-1-sukadev@linux.ibm.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: usb: qmi_wwan: add Telit LE910Cx 0x1230 composition

2020-11-10T11:38:57Z

[ Upstream commit 5fd8477ed8ca77e64b93d44a6dae4aa70c191396 ] Add support for Telit LE910Cx 0x1230 composition: 0x1230: tty, adb, rmnet, audio, tty, tty, tty, tty Signed-off-by: Daniele Palmas Acked-by: Bjørn Mork Link: https://lore.kernel.org/r/20201102110108.17244-1-dnlplm@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: ethernet: ti: cpsw: disable PTPv1 hw timestamping advertisement

2020-11-10T11:38:57Z

[ Upstream commit 0a26ba0603d637eb6673a2ea79808cc73909ef3a ] The TI CPTS does not natively support PTPv1, only PTPv2. But, as it happens, the CPTS can provide HW timestamp for PTPv1 Sync messages, because CPTS HW parser looks for PTP messageType id in PTP message octet 0 which value is 0 for PTPv1. As result, CPTS HW can detect Sync messages for PTPv1 and PTPv2 (Sync messageType = 0 for both), but it fails for any other PTPv1 messages (Delay_req/resp) and will return PTP messageType id 0 for them. The commit e9523a5a32a1 ("net: ethernet: ti: cpsw: enable HWTSTAMP_FILTER_PTP_V1_L4_EVENT filter") added PTPv1 hw timestamping advertisement by mistake, only to make Linux Kernel "timestamping" utility work, and this causes issues with only PTPv1 compatible HW/SW - Sync HW timestamped, but Delay_req/resp are not. Hence, fix it disabling PTPv1 hw timestamping advertisement, so only PTPv1 compatible HW/SW can properly roll back to SW timestamping. Fixes: e9523a5a32a1 ("net: ethernet: ti: cpsw: enable HWTSTAMP_FILTER_PTP_V1_L4_EVENT filter") Signed-off-by: Grygorii Strashko Acked-by: Richard Cochran Link: https://lore.kernel.org/r/20201029190910.30789-1-grygorii.strashko@ti.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

ionic: check port ptr before use

2020-11-10T11:38:57Z

[ Upstream commit 2bcbf42add911ef63a6d90e92001dc2bcb053e68 ] Check for corner case of port_init failure before using the port_info pointer. Fixes: 4d03e00a2140 ("ionic: Add initial ethtool support") Signed-off-by: Shannon Nelson Link: https://lore.kernel.org/r/20201104195606.61184-1-snelson@pensando.io Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

gianfar: Account for Tx PTP timestamp in the skb headroom

2020-11-10T11:38:57Z

[ Upstream commit d6a076d68c6b5d6a5800f3990a513facb7016dea ] When PTP timestamping is enabled on Tx, the controller inserts the Tx timestamp at the beginning of the frame buffer, between SFD and the L2 frame header. This means that the skb provided by the stack is required to have enough headroom otherwise a new skb needs to be created by the driver to accommodate the timestamp inserted by h/w. Up until now the driver was relying on the second option, using skb_realloc_headroom() to create a new skb to accommodate PTP frames. Turns out that this method is not reliable, as reallocation of skbs for PTP frames along with the required overhead (skb_set_owner_w, consume_skb) is causing random crashes in subsequent skb_*() calls, when multiple concurrent TCP streams are run at the same time on the same device (as seen in James' report). Note that these crashes don't occur with a single TCP stream, nor with multiple concurrent UDP streams, but only when multiple TCP streams are run concurrently with the PTP packet flow (doing skb reallocation). This patch enforces the first method, by requesting enough headroom from the stack to accommodate PTP frames, and so avoiding skb_realloc_headroom() & co, and the crashes no longer occur. There's no reason not to set needed_headroom to a large enough value to accommodate PTP frames, so in this regard this patch is a fix. Reported-by: James Jurack Fixes: bee9e58c9e98 ("gianfar:don't add FCB length to hard_header_len") Signed-off-by: Claudiu Manoil Link: https://lore.kernel.org/r/20201020173605.1173-1-claudiu.manoil@nxp.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

gianfar: Replace skb_realloc_headroom with skb_cow_head for PTP

2020-11-10T11:38:57Z

[ Upstream commit d145c9031325fed963a887851d9fa42516efd52b ] When PTP timestamping is enabled on Tx, the controller inserts the Tx timestamp at the beginning of the frame buffer, between SFD and the L2 frame header. This means that the skb provided by the stack is required to have enough headroom otherwise a new skb needs to be created by the driver to accommodate the timestamp inserted by h/w. Up until now the driver was relying on skb_realloc_headroom() to create new skbs to accommodate PTP frames. Turns out that this method is not reliable in this context at least, as skb_realloc_headroom() for PTP frames can cause random crashes, mostly in subsequent skb_*() calls, when multiple concurrent TCP streams are run at the same time with the PTP flow on the same device (as seen in James' report). I also noticed that when the system is loaded by sending multiple TCP streams, the driver receives cloned skbs in large numbers. skb_cow_head() instead proves to be stable in this scenario, and not only handles cloned skbs too but it's also more efficient and widely used in other drivers. The commit introducing skb_realloc_headroom in the driver goes back to 2009, commit 93c1285c5d92 ("gianfar: reallocate skb when headroom is not enough for fcb"). For practical purposes I'm referencing a newer commit (from 2012) that brings the code to its current structure (and fixes the PTP case). Fixes: 9c4886e5e63b ("gianfar: Fix invalid TX frames returned on error queue when time stamping") Reported-by: James Jurack Suggested-by: Jakub Kicinski Signed-off-by: Claudiu Manoil Link: https://lore.kernel.org/r/20201029081057.8506-1-claudiu.manoil@nxp.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman