user/sven/linux.git/drivers/net, branch v6.1.112

can: mcp251xfd: move mcp251xfd_timestamp_start()/stop() into mcp251xfd_chip_start/stop()

2024-09-30T14:23:55Z

commit a7801540f325d104de5065850a003f1d9bdc6ad3 upstream. The mcp251xfd wakes up from Low Power or Sleep Mode when SPI activity is detected. To avoid this, make sure that the timestamp worker is stopped before shutting down the chip. Split the starting of the timestamp worker out of mcp251xfd_timestamp_init() into the separate function mcp251xfd_timestamp_start(). Call mcp251xfd_timestamp_init() before mcp251xfd_chip_start(), move mcp251xfd_timestamp_start() to mcp251xfd_chip_start(). In this way, mcp251xfd_timestamp_stop() can be called unconditionally by mcp251xfd_chip_stop(). Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: mcp251xfd: properly indent labels

2024-09-30T14:23:55Z

commit 51b2a721612236335ddec4f3fb5f59e72a204f3a upstream. To fix the coding style, remove the whitespace in front of labels. Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: mcp251xfd: mcp251xfd_ring_init(): check TX-coalescing configuration

2024-09-30T14:23:48Z

[ Upstream commit ac2b81eb8b2d104033560daea886ee84531e3d0a ] When changing the interface from CAN-CC to CAN-FD mode the old coalescing parameters are re-used. This might cause problem, as the configured parameters are too big for CAN-FD mode. During testing an invalid TX coalescing configuration has been seen. The problem should be been fixed in the previous patch, but add a safeguard here to ensure that the number of TEF coalescing buffers (if configured) is exactly the half of all TEF buffers. Link: https://lore.kernel.org/all/20240805-mcp251xfd-fix-ringconfig-v1-2-72086f0ca5ee@pengutronix.de Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

wifi: iwlwifi: clear trans->state earlier upon error

2024-09-30T14:23:48Z

[ Upstream commit 094513f8a2fbddee51b055d8035f995551f98fce ] When the firmware crashes, we first told the op_mode and only then, changed the transport's state. This is a problem if the op_mode's nic_error() handler needs to send a host command: it'll see that the transport's state still reflects that the firmware is alive. Today, this has no consequences since we set the STATUS_FW_ERROR bit and that will prevent sending host commands. iwl_fw_dbg_stop_restart_recording looks at this bit to know not to send a host command for example. To fix the hibernation, we needed to reset the firmware without having an error and checking STATUS_FW_ERROR to see whether the firmware is alive will no longer hold, so this change is necessary as well. Change the flow a bit. Change trans->state before calling the op_mode's nic_error() method and check trans->state instead of STATUS_FW_ERROR. This will keep the current behavior of iwl_fw_dbg_stop_restart_recording upon firmware error, and it'll allow us to call iwl_fw_dbg_stop_restart_recording safely even if STATUS_FW_ERROR is clear, but yet, the firmware is not alive. Signed-off-by: Emmanuel Grumbach Signed-off-by: Miri Korenblit Link: https://patch.msgid.link/20240825191257.9d7427fbdfd7.Ia056ca57029a382c921d6f7b6a6b28fc480f2f22@changeid [I missed this was a dependency for the hibernation fix, changed the commit message a bit accordingly] Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin

wifi: iwlwifi: mvm: don't wait for tx queues if firmware is dead

2024-09-30T14:23:48Z

[ Upstream commit 3a84454f5204718ca5b4ad2c1f0bf2031e2403d1 ] There is a WARNING in iwl_trans_wait_tx_queues_empty() (that was recently converted from just a message), that can be hit if we wait for TX queues to become empty after firmware died. Clearly, we can't expect anything from the firmware after it's declared dead. Don't call iwl_trans_wait_tx_queues_empty() in this case. While it could be a good idea to stop the flow earlier, the flush functions do some maintenance work that is not related to the firmware, so keep that part of the code running even when the firmware is not running. Signed-off-by: Emmanuel Grumbach Signed-off-by: Miri Korenblit Link: https://patch.msgid.link/20240825191257.a7cbd794cee9.I44a739fbd4ffcc46b83844dd1c7b2eb0c7b270f6@changeid [edit commit message] Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin

wifi: iwlwifi: mvm: pause TCM when the firmware is stopped

2024-09-30T14:23:48Z

[ Upstream commit 0668ebc8c2282ca1e7eb96092a347baefffb5fe7 ] Not doing so will make us send a host command to the transport while the firmware is not alive, which will trigger a WARNING. bad state = 0 WARNING: CPU: 2 PID: 17434 at drivers/net/wireless/intel/iwlwifi/iwl-trans.c:115 iwl_trans_send_cmd+0x1cb/0x1e0 [iwlwifi] RIP: 0010:iwl_trans_send_cmd+0x1cb/0x1e0 [iwlwifi] Call Trace: iwl_mvm_send_cmd+0x40/0xc0 [iwlmvm] iwl_mvm_config_scan+0x198/0x260 [iwlmvm] iwl_mvm_recalc_tcm+0x730/0x11d0 [iwlmvm] iwl_mvm_tcm_work+0x1d/0x30 [iwlmvm] process_one_work+0x29e/0x640 worker_thread+0x2df/0x690 ? rescuer_thread+0x540/0x540 kthread+0x192/0x1e0 ? set_kthread_struct+0x90/0x90 ret_from_fork+0x22/0x30 Signed-off-by: Emmanuel Grumbach Signed-off-by: Miri Korenblit Link: https://patch.msgid.link/20240825191257.5abe71ca1b6b.I97a968cb8be1f24f94652d9b110ecbf6af73f89e@changeid Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin

wifi: iwlwifi: mvm: fix iwl_mvm_scan_fits() calculation

2024-09-30T14:23:48Z

[ Upstream commit d44162280899c3fc2c6700e21e491e71c3c96e3d ] The calculation should consider also the 6GHz IE's len, fix that. In addition, in iwl_mvm_sched_scan_start() the scan_fits helper is called only in case non_psc_incldued is true, but it should be called regardless, fix that as well. Signed-off-by: Daniel Gabay Reviewed-by: Ilan Peer Signed-off-by: Miri Korenblit Link: https://patch.msgid.link/20240825191257.7db825442fd2.I99f4d6587709de02072fd57957ec7472331c6b1d@changeid Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin

wifi: iwlwifi: lower message level for FW buffer destination

2024-09-30T14:23:48Z

[ Upstream commit f8a129c1e10256c785164ed5efa5d17d45fbd81b ] An invalid buffer destination is not a problem for the driver and it does not make sense to report it with the KERN_ERR message level. As such, change the message to use IWL_DEBUG_FW. Reported-by: Len Brown Closes: https://lore.kernel.org/r/CAJvTdKkcxJss=DM2sxgv_MR5BeZ4_OC-3ad6tA40TYH2yqHCWw@mail.gmail.com Signed-off-by: Benjamin Berg Signed-off-by: Miri Korenblit Link: https://patch.msgid.link/20240825191257.20abf78f05bc.Ifbcecc2ae9fb40b9698302507dcba8b922c8d856@changeid Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin

net: ftgmac100: Ensure tx descriptor updates are visible

2024-09-30T14:23:47Z

[ Upstream commit 4186c8d9e6af57bab0687b299df10ebd47534a0a ] The driver must ensure TX descriptor updates are visible before updating TX pointer and TX clear pointer. This resolves TX hangs observed on AST2600 when running iperf3. Signed-off-by: Jacky Chou Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: dpaa: Pad packets to ETH_ZLEN

2024-09-18T17:23:06Z

[ Upstream commit cbd7ec083413c6a2e0c326d49e24ec7d12c7a9e0 ] When sending packets under 60 bytes, up to three bytes of the buffer following the data may be leaked. Avoid this by extending all packets to ETH_ZLEN, ensuring nothing is leaked in the padding. This bug can be reproduced by running $ ping -s 11 destination Fixes: 9ad1a3749333 ("dpaa_eth: add support for DPAA Ethernet") Suggested-by: Eric Dumazet Signed-off-by: Sean Anderson Reviewed-by: Eric Dumazet Link: https://patch.msgid.link/20240910143144.1439910-1-sean.anderson@linux.dev Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin