user/sven/linux.git/drivers/net, branch v6.12.53

net: usb: asix: hold PM usage ref to avoid PM/MDIO + RTNL deadlock

2025-10-15T10:00:24Z

commit 3d3c4cd5c62f24bb3cb4511b7a95df707635e00a upstream. Prevent USB runtime PM (autosuspend) for AX88772* in bind. usbnet enables runtime PM (autosuspend) by default, so disabling it via the usb_driver flag is ineffective. On AX88772B, autosuspend shows no measurable power saving with current driver (no link partner, admin up/down). The ~0.453 W -> ~0.248 W drop on v6.1 comes from phylib powering the PHY off on admin-down, not from USB autosuspend. The real hazard is that with runtime PM enabled, ndo_open() (under RTNL) may synchronously trigger autoresume (usb_autopm_get_interface()) into asix_resume() while the USB PM lock is held. Resume paths then invoke phylink/phylib and MDIO, which also expect RTNL, leading to possible deadlocks or PM lock vs MDIO wake issues. To avoid this, keep the device runtime-PM active by taking a usage reference in ax88772_bind() and dropping it in unbind(). A non-zero PM usage count blocks runtime suspend regardless of userspace policy (.../power/control - pm_runtime_allow/forbid), making this approach robust against sysfs overrides. Holding a runtime-PM usage ref does not affect system-wide suspend; system sleep/resume callbacks continue to run as before. Fixes: 4a2c7217cd5a ("net: usb: asix: ax88772: manage PHY PM from MAC") Reported-by: Hubert Wiśniewski Closes: https://lore.kernel.org/all/DCGHG5UJT9G3.2K1GHFZ3H87T0@gmail.com Tested-by: Hubert Wiśniewski Reported-by: Marek Szyprowski Closes: https://lore.kernel.org/all/b5ea8296-f981-445d-a09a-2f389d7f6fdd@samsung.com Cc: stable@vger.kernel.org Signed-off-by: Oleksij Rempel Link: https://patch.msgid.link/20251005081203.3067982-1-o.rempel@pengutronix.de Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman

Revert "net/mlx5e: Update and set Xon/Xoff upon MTU set"

2025-10-15T10:00:20Z

[ Upstream commit 6f5dacf88a32b3fd8b52c8ea781bf188c42aaa95 ] This reverts commit ceddedc969f0532b7c62ca971ee50d519d2bc0cb. Commit in question breaks the mapping of PGs to pools for some SKUs. Specifically multi-host NICs seem to be shipped with a custom buffer configuration which maps the lossy PG to pool 4. But the bad commit overrides this with pool 0 which does not have sufficient buffer space reserved. Resulting in ~40% packet loss. The commit also breaks BMC / OOB connection completely (100% packet loss). Revert, similarly to commit 3fbfe251cc9f ("Revert "net/mlx5e: Update and set Xon/Xoff upon port speed set""). The breakage is exactly the same, the only difference is that quoted commit would break the NIC immediately on boot, and the currently reverted commit only when MTU is changed. Note: "good" kernels do not restore the configuration, so downgrade isn't enough to recover machines. A NIC power cycle seems to be necessary to return to a healthy state (or overriding the relevant registers using a custom patch). Fixes: ceddedc969f0 ("net/mlx5e: Update and set Xon/Xoff upon MTU set") Signed-off-by: Jakub Kicinski Reviewed-by: Tariq Toukan Link: https://patch.msgid.link/20250929181529.1848157-1-kuba@kernel.org Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

net/mlx5: fw reset, add reset timeout work

2025-10-15T10:00:20Z

[ Upstream commit 5cfbe7ebfa42fd3c517a701dab5bd73524da9088 ] Add sync reset timeout to stop poll_sync_reset in case there was no reset done or abort event within timeout. Otherwise poll sync reset will just continue and in case of fw fatal error no health reporting will be done. Fixes: 38b9f903f22b ("net/mlx5: Handle sync reset request event") Signed-off-by: Moshe Shemesh Reviewed-by: Shay Drori Signed-off-by: Tariq Toukan Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net/mlx5: pagealloc: Fix reclaim race during command interface teardown

2025-10-15T10:00:19Z

[ Upstream commit 79a0e32b32ac4e4f9e4bb22be97f371c8c116c88 ] The reclaim_pages_cmd() function sends a command to the firmware to reclaim pages if the command interface is active. A race condition can occur if the command interface goes down (e.g., due to a PCI error) while the mlx5_cmd_do() call is in flight. In this case, mlx5_cmd_do() will return an error. The original code would propagate this error immediately, bypassing the software-based page reclamation logic that is supposed to run when the command interface is down. Fix this by checking whether mlx5_cmd_do() returns -ENXIO, which mark that command interface is down. If this is the case, fall through to the software reclamation path. If the command failed for any another reason, or finished successfully, return as before. Fixes: b898ce7bccf1 ("net/mlx5: cmdif, Avoid skipping reclaim pages if FW is not accessible") Signed-off-by: Shay Drory Reviewed-by: Moshe Shemesh Signed-off-by: Tariq Toukan Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net/mlx5: Stop polling for command response if interface goes down

2025-10-15T10:00:19Z

[ Upstream commit b1f0349bd6d320c382df2e7f6fc2ac95c85f2b18 ] Stop polling on firmware response to command in polling mode if the command interface got down. This situation can occur, for example, if a firmware fatal error is detected during polling. This change halts the polling process when the command interface goes down, preventing unnecessary waits. Fixes: b898ce7bccf1 ("net/mlx5: cmdif, Avoid skipping reclaim pages if FW is not accessible") Signed-off-by: Moshe Shemesh Reviewed-by: Shay Drori Signed-off-by: Tariq Toukan Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: dlink: handle copy_thresh allocation failure

2025-10-15T10:00:19Z

[ Upstream commit 8169a6011c5fecc6cb1c3654c541c567d3318de8 ] The driver did not handle failure of `netdev_alloc_skb_ip_align()`. If the allocation failed, dereferencing `skb->protocol` could lead to a NULL pointer dereference. This patch tries to allocate `skb`. If the allocation fails, it falls back to the normal path. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Suggested-by: Jakub Kicinski Tested-on: D-Link DGE-550T Rev-A3 Signed-off-by: Yeounsu Moon Reviewed-by: Andrew Lunn Link: https://patch.msgid.link/20250928190124.1156-1-yyyynoom@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: ena: return 0 in ena_get_rxfh_key_size() when RSS hash key is not configurable

2025-10-15T10:00:19Z

[ Upstream commit f017156aea60db8720e47591ed1e041993381ad2 ] In EC2 instances where the RSS hash key is not configurable, ethtool shows bogus RSS hash key since ena_get_rxfh_key_size() unconditionally returns ENA_HASH_KEY_SIZE. Commit 6a4f7dc82d1e ("net: ena: rss: do not allocate key when not supported") added proper handling for devices that don't support RSS hash key configuration, but ena_get_rxfh_key_size() has been unchanged. When the RSS hash key is not configurable, return 0 instead of ENA_HASH_KEY_SIZE to clarify getting the value is not supported. Tested on m5 instance families. Without patch: # ethtool -x ens5 | grep -A 1 "RSS hash key" RSS hash key: 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00 With patch: # ethtool -x ens5 | grep -A 1 "RSS hash key" RSS hash key: Operation not supported Fixes: 6a4f7dc82d1e ("net: ena: rss: do not allocate key when not supported") Signed-off-by: Kohei Enju Link: https://patch.msgid.link/20250929050247.51680-1-enjuk@amazon.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

nfp: fix RSS hash key size when RSS is not supported

2025-10-15T10:00:19Z

[ Upstream commit 8425161ac1204d2185e0a10f5ae652bae75d2451 ] The nfp_net_get_rxfh_key_size() function returns -EOPNOTSUPP when devices don't support RSS, and callers treat the negative value as a large positive value since the return type is u32. Return 0 when devices don't support RSS, aligning with the ethtool interface .get_rxfh_key_size() that requires returning 0 in such cases. Fixes: 9ff304bfaf58 ("nfp: add support for reporting CRC32 hash function") Signed-off-by: Kohei Enju Link: https://patch.msgid.link/20250929054230.68120-1-enjuk@amazon.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

idpf: fix mismatched free function for dma_alloc_coherent

2025-10-15T10:00:19Z

[ Upstream commit b9bd25f47eb79c9eb275e3d9ac3983dc88577dd4 ] The mailbox receive path allocates coherent DMA memory with dma_alloc_coherent(), but frees it with dmam_free_coherent(). This is incorrect since dmam_free_coherent() is only valid for buffers allocated with dmam_alloc_coherent(). Fix the mismatch by using dma_free_coherent() instead of dmam_free_coherent Fixes: e54232da1238 ("idpf: refactor idpf_recv_mb_msg") Signed-off-by: Alok Tiwari Reviewed-by: Simon Horman Reviewed-by: Aleksandr Loktionov Reviewed-by: Jacob Keller Reviewed-by: Madhu Chittim Link: https://patch.msgid.link/20250925180212.415093-1-alok.a.tiwari@oracle.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: usb: Remove disruptive netif_wake_queue in rtl8150_set_multicast

2025-10-15T10:00:17Z

[ Upstream commit 958baf5eaee394e5fd976979b0791a875f14a179 ] syzbot reported WARNING in rtl8150_start_xmit/usb_submit_urb. This is the sequence of events that leads to the warning: rtl8150_start_xmit() { netif_stop_queue(); usb_submit_urb(dev->tx_urb); } rtl8150_set_multicast() { netif_stop_queue(); netif_wake_queue(); <-- wakes up TX queue before URB is done } rtl8150_start_xmit() { netif_stop_queue(); usb_submit_urb(dev->tx_urb); <-- double submission } rtl8150_set_multicast being the ndo_set_rx_mode callback should not be calling netif_stop_queue and notif_start_queue as these handle TX queue synchronization. The net core function dev_set_rx_mode handles the synchronization for rtl8150_set_multicast making it safe to remove these locks. Reported-and-tested-by: syzbot+78cae3f37c62ad092caa@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=78cae3f37c62ad092caa Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Tested-by: Michal Pecio Signed-off-by: I Viswanath Link: https://patch.msgid.link/20250924134350.264597-1-viswanathiyyappan@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin