user/sven/linux.git/drivers/nfc, branch v6.1.151

nfc: pn533: Add poll mod list filling check

2024-09-04T11:25:02Z

[ Upstream commit febccb39255f9df35527b88c953b2e0deae50e53 ] In case of im_protocols value is 1 and tm_protocols value is 0 this combination successfully passes the check 'if (!im_protocols && !tm_protocols)' in the nfc_start_poll(). But then after pn533_poll_create_mod_list() call in pn533_start_poll() poll mod list will remain empty and dev->poll_mod_count will remain 0 which lead to division by zero. Normally no im protocol has value 1 in the mask, so this combination is not expected by driver. But these protocol values actually come from userspace via Netlink interface (NFC_CMD_START_POLL operation). So a broken or malicious program may pass a message containing a "bad" combination of protocol parameter values so that dev->poll_mod_count is not incremented inside pn533_poll_create_mod_list(), thus leading to division by zero. Call trace looks like: nfc_genl_start_poll() nfc_start_poll() ->start_poll() pn533_start_poll() Add poll mod list filling check. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: dfccd0f58044 ("NFC: pn533: Add some polling entropy") Signed-off-by: Aleksandr Mishin Acked-by: Krzysztof Kozlowski Link: https://patch.msgid.link/20240827084822.18785-1-amishin@t-argos.ru Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

nfc/nci: Add the inconsistency check between the input data length and count

2024-07-11T10:47:18Z

[ Upstream commit 068648aab72c9ba7b0597354ef4d81ffaac7b979 ] write$nci(r0, &(0x7f0000000740)=ANY=[@ANYBLOB="610501"], 0xf) Syzbot constructed a write() call with a data length of 3 bytes but a count value of 15, which passed too little data to meet the basic requirements of the function nci_rf_intf_activated_ntf_packet(). Therefore, increasing the comparison between data length and count value to avoid problems caused by inconsistent data length and count. Reported-and-tested-by: syzbot+71bfed2b2bcea46c98f2@syzkaller.appspotmail.com Signed-off-by: Edward Adam Davis Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

NFC: trf7970a: disable all regulators on removal

2024-05-02T14:29:24Z

[ Upstream commit 6bea4f03c6a4e973ef369e15aac88f37981db49e ] During module probe, regulator 'vin' and 'vdd-io' are used and enabled, but the vdd-io regulator overwrites the 'vin' regulator pointer. During remove, only the vdd-io is disabled, as the vin regulator pointer is not available anymore. When regulator_put() is called during resource cleanup a kernel warning is given, as the regulator is still enabled. Store the two regulators in separate pointers and disable both the regulators on module remove. Fixes: 49d22c70aaf0 ("NFC: trf7970a: Add device tree option of 1.8 Volt IO voltage") Signed-off-by: Paul Geurts Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/DB7PR09MB26847A4EBF88D9EDFEB1DA0F950E2@DB7PR09MB2684.eurprd09.prod.outlook.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

nfcsim.c: Fix error checking for debugfs_create_dir

2023-06-28T09:12:36Z

[ Upstream commit 9b9e46aa07273ceb96866b2e812b46f1ee0b8d2f ] This patch fixes the error checking in nfcsim.c. The DebugFS kernel API is developed in a way that the caller can safely ignore the errors that occur during the creation of DebugFS nodes. Signed-off-by: Osama Muhammad Reviewed-by: Simon Horman Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

nfc: st-nci: Fix use after free bug in ndlc_remove due to race condition

2023-03-22T12:33:46Z

[ Upstream commit 5000fe6c27827a61d8250a7e4a1d26c3298ef4f6 ] This bug influences both st_nci_i2c_remove and st_nci_spi_remove. Take st_nci_i2c_remove as an example. In st_nci_i2c_probe, it called ndlc_probe and bound &ndlc->sm_work with llt_ndlc_sm_work. When it calls ndlc_recv or timeout handler, it will finally call schedule_work to start the work. When we call st_nci_i2c_remove to remove the driver, there may be a sequence as follows: Fix it by finishing the work before cleanup in ndlc_remove CPU0 CPU1 |llt_ndlc_sm_work st_nci_i2c_remove | ndlc_remove | st_nci_remove | nci_free_device| kfree(ndev) | //free ndlc->ndev | |llt_ndlc_rcv_queue |nci_recv_frame |//use ndlc->ndev Fixes: 35630df68d60 ("NFC: st21nfcb: Add driver for STMicroelectronics ST21NFCB NFC chip") Signed-off-by: Zheng Wang Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20230312160837.2040857-1-zyytlz.wz@163.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

nfc: pn533: initialize struct pn533_out_arg properly

2023-03-22T12:33:44Z

[ Upstream commit 484b7059796e3bc1cb527caa61dfc60da649b4f6 ] struct pn533_out_arg used as a temporary context for out_urb is not initialized properly. Its uninitialized 'phy' field can be dereferenced in error cases inside pn533_out_complete() callback function. It causes the following failure: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.2.0-rc3-next-20230110-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 RIP: 0010:pn533_out_complete.cold+0x15/0x44 drivers/nfc/pn533/usb.c:441 Call Trace: __usb_hcd_giveback_urb+0x2b6/0x5c0 drivers/usb/core/hcd.c:1671 usb_hcd_giveback_urb+0x384/0x430 drivers/usb/core/hcd.c:1754 dummy_timer+0x1203/0x32d0 drivers/usb/gadget/udc/dummy_hcd.c:1988 call_timer_fn+0x1da/0x800 kernel/time/timer.c:1700 expire_timers+0x234/0x330 kernel/time/timer.c:1751 __run_timers kernel/time/timer.c:2022 [inline] __run_timers kernel/time/timer.c:1995 [inline] run_timer_softirq+0x326/0x910 kernel/time/timer.c:2035 __do_softirq+0x1fb/0xaf6 kernel/softirq.c:571 invoke_softirq kernel/softirq.c:445 [inline] __irq_exit_rcu+0x123/0x180 kernel/softirq.c:650 irq_exit_rcu+0x9/0x20 kernel/softirq.c:662 sysvec_apic_timer_interrupt+0x97/0xc0 arch/x86/kernel/apic/apic.c:1107 Initialize the field with the pn533_usb_phy currently used. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 9dab880d675b ("nfc: pn533: Wait for out_urb's completion in pn533_usb_send_frame()") Reported-by: syzbot+1e608ba4217c96d1952f@syzkaller.appspotmail.com Signed-off-by: Fedor Pchelkin Reviewed-by: Simon Horman Link: https://lore.kernel.org/r/20230309165050.207390-1-pchelkin@ispras.ru Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

nfc: fdp: add null check of devm_kmalloc_array in fdp_nci_i2c_read_device_properties

2023-03-17T07:50:22Z

[ Upstream commit 11f180a5d62a51b484e9648f9b310e1bd50b1a57 ] devm_kmalloc_array may fails, *fw_vsc_cfg might be null and cause out-of-bounds write in device_property_read_u8_array later. Fixes: a06347c04c13 ("NFC: Add Intel Fields Peak NFC solution driver") Signed-off-by: Kang Chen Reviewed-by: Krzysztof Kozlowski Reviewed-by: Simon Horman Link: https://lore.kernel.org/r/20230227093037.907654-1-void0red@gmail.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

nfc: fix memory leak of se_io context in nfc_genl_se_io

2023-03-11T12:55:27Z

[ Upstream commit 25ff6f8a5a3b8dc48e8abda6f013e8cc4b14ffea ] The callback context for sending/receiving APDUs to/from the selected secure element is allocated inside nfc_genl_se_io and supposed to be eventually freed in se_io_cb callback function. However, there are several error paths where the bwi_timer is not charged to call se_io_cb later, and the cb_context is leaked. The patch proposes to free the cb_context explicitly on those error paths. At the moment we can't simply check 'dev->ops->se_io()' return value as it may be negative in both cases: when the timer was charged and was not. Fixes: 5ce3f32b5264 ("NFC: netlink: SE API implementation") Reported-by: syzbot+df64c0a2e8d68e78a4fa@syzkaller.appspotmail.com Signed-off-by: Fedor Pchelkin Signed-off-by: Alexey Khoroshilov Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

nfc: pn533: Wait for out_urb's completion in pn533_usb_send_frame()

2023-01-18T10:58:26Z

[ Upstream commit 9dab880d675b9d0dd56c6428e4e8352a3339371d ] Fix a use-after-free that occurs in hcd when in_urb sent from pn533_usb_send_frame() is completed earlier than out_urb. Its callback frees the skb data in pn533_send_async_complete() that is used as a transfer buffer of out_urb. Wait before sending in_urb until the callback of out_urb is called. To modify the callback of out_urb alone, separate the complete function of out_urb and ack_urb. Found by a modified version of syzkaller. BUG: KASAN: use-after-free in dummy_timer Call Trace: memcpy (mm/kasan/shadow.c:65) dummy_perform_transfer (drivers/usb/gadget/udc/dummy_hcd.c:1352) transfer (drivers/usb/gadget/udc/dummy_hcd.c:1453) dummy_timer (drivers/usb/gadget/udc/dummy_hcd.c:1972) arch_static_branch (arch/x86/include/asm/jump_label.h:27) static_key_false (include/linux/jump_label.h:207) timer_expire_exit (include/trace/events/timer.h:127) call_timer_fn (kernel/time/timer.c:1475) expire_timers (kernel/time/timer.c:1519) __run_timers (kernel/time/timer.c:1790) run_timer_softirq (kernel/time/timer.c:1803) Fixes: c46ee38620a2 ("NFC: pn533: add NXP pn533 nfc device driver") Signed-off-by: Minsuk Kang Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

nfc: pn533: Clear nfc_target before being used

2022-12-31T12:32:54Z

[ Upstream commit 9f28157778ede0d4f183f7ab3b46995bb400abbe ] Fix a slab-out-of-bounds read that occurs in nla_put() called from nfc_genl_send_target() when target->sensb_res_len, which is duplicated from an nfc_target in pn533, is too large as the nfc_target is not properly initialized and retains garbage values. Clear nfc_targets with memset() before they are used. Found by a modified version of syzkaller. BUG: KASAN: slab-out-of-bounds in nla_put Call Trace: memcpy nla_put nfc_genl_dump_targets genl_lock_dumpit netlink_dump __netlink_dump_start genl_family_rcv_msg_dumpit genl_rcv_msg netlink_rcv_skb genl_rcv netlink_unicast netlink_sendmsg sock_sendmsg ____sys_sendmsg ___sys_sendmsg __sys_sendmsg do_syscall_64 Fixes: 673088fb42d0 ("NFC: pn533: Send ATR_REQ directly for active device detection") Fixes: 361f3cb7f9cf ("NFC: DEP link hook implementation for pn533") Signed-off-by: Minsuk Kang Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20221214015139.119673-1-linuxlovemin@yonsei.ac.kr Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin