user/sven/linux.git/drivers/ntb, branch v5.4.178

NTB: perf: Fix an error code in perf_setup_inbuf()

2021-09-22T10:26:44Z

[ Upstream commit 0097ae5f7af5684f961a5f803ff7ad3e6f933668 ] When the function IS_ALIGNED() returns false, the value of ret is 0. So, we set ret to -EINVAL to indicate this error. Clean up smatch warning: drivers/ntb/test/ntb_perf.c:602 perf_setup_inbuf() warn: missing error code 'ret'. Reported-by: Abaci Robot Signed-off-by: Yang Li Reviewed-by: Serge Semin Signed-off-by: Jon Mason Signed-off-by: Sasha Levin

NTB: Fix an error code in ntb_msit_probe()

2021-09-22T10:26:44Z

[ Upstream commit 319f83ac98d7afaabab84ce5281a819a358b9895 ] When the value of nm->isr_ctx is false, the value of ret is 0. So, we set ret to -ENOMEM to indicate this error. Clean up smatch warning: drivers/ntb/test/ntb_msi_test.c:373 ntb_msit_probe() warn: missing error code 'ret'. Reported-by: Abaci Robot Signed-off-by: Yang Li Reviewed-by: Logan Gunthorpe Signed-off-by: Jon Mason Signed-off-by: Sasha Levin

NTB: hw: amd: fix an issue about leak system resources

2020-10-29T08:58:00Z

[ Upstream commit 44a0a3c17919db1498cebb02ecf3cf4abc1ade7b ] The related system resources were not released when pci_set_dma_mask(), pci_set_consistent_dma_mask(), or pci_iomap() return error in the amd_ntb_init_pci() function. Add pci_release_regions() to fix it. Fixes: a1b3695820aa ("NTB: Add support for AMD PCI-Express Non-Transparent Bridge") Signed-off-by: Kaige Li Signed-off-by: Jon Mason Signed-off-by: Sasha Levin

NTB: perf: Fix race condition when run with ntb_test

2020-06-24T15:50:41Z

[ Upstream commit 34d8673a01b053b6231a995a4eec9341163d63be ] When running ntb_test, the script tries to run the ntb_perf test immediately after probing the modules. Since adding multi-port support, this fails seeing the new initialization procedure in ntb_perf can not complete instantly. To fix this we add a completion which is waited on when a test is started. In this way, run can be written any time after the module is loaded and it will wait for the initialization to complete instead of sending an error. Fixes: 5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support") Signed-off-by: Logan Gunthorpe Acked-by: Allen Hubbe Tested-by: Alexander Fomichev Signed-off-by: Jon Mason Signed-off-by: Sasha Levin

NTB: perf: Fix support for hardware that doesn't have port numbers

2020-06-24T15:50:41Z

[ Upstream commit b54369a248c2e033bfcf5d6917e08cf9d73d54a6 ] Legacy drivers do not have port numbers (but is reliably only two ports) and was broken by the recent commit that added mult-port support to ntb_perf. This is especially important to support the cross link topology which is perfectly symmetric and cannot assign unique port numbers easily. Hardware that returns zero for both the local port and the peer should just always use gidx=0 for the only peer. Fixes: 5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support") Signed-off-by: Logan Gunthorpe Acked-by: Allen Hubbe Tested-by: Alexander Fomichev Signed-off-by: Jon Mason Signed-off-by: Sasha Levin

NTB: perf: Don't require one more memory window than number of peers

2020-06-24T15:50:40Z

[ Upstream commit a9c4211ac918ade1522aced6b5acfbe824722f7d ] ntb_perf should not require more than one memory window per peer. This was probably an off-by-one error. Fixes: 5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support") Signed-off-by: Logan Gunthorpe Acked-by: Allen Hubbe Tested-by: Alexander Fomichev Signed-off-by: Jon Mason Signed-off-by: Sasha Levin

NTB: Revert the change to use the NTB device dev for DMA allocations

2020-06-24T15:50:40Z

[ Upstream commit 40da7d9a93c8941737ef4a1208d32c13ce017fe1 ] Commit 417cf39cfea9 ("NTB: Set dma mask and dma coherent mask to NTB devices") started using the NTB device for DMA allocations which was turns out was wrong. If the IOMMU is enabled, such alloctanions will always fail with messages such as: DMAR: Allocating domain for 0000:02:00.1 failed This is because the IOMMU has not setup the device for such use. Change the tools back to using the PCI device for allocations seeing it doesn't make sense to add an IOMMU group for the non-physical NTB device. Also remove the code that sets the DMA mask as it no longer makes sense to do this. Fixes: 7f46c8b3a552 ("NTB: ntb_tool: Add full multi-port NTB API support") Signed-off-by: Logan Gunthorpe Tested-by: Alexander Fomichev Signed-off-by: Jon Mason Signed-off-by: Sasha Levin

NTB: ntb_tool: reading the link file should not end in a NULL byte

2020-06-24T15:50:40Z

[ Upstream commit 912e12813dd03c602e4922fc34709ec4d4380cf0 ] When running ntb_test this warning is issued: ./ntb_test.sh: line 200: warning: command substitution: ignored null byte in input This is caused by the kernel returning one more byte than is necessary when reading the link file. Reduce the number of bytes read back to 2 as it was before the commit that regressed this. Fixes: 7f46c8b3a552 ("NTB: ntb_tool: Add full multi-port NTB API support") Signed-off-by: Logan Gunthorpe Acked-by: Allen Hubbe Tested-by: Alexander Fomichev Signed-off-by: Jon Mason Signed-off-by: Sasha Levin

ntb_tool: pass correct struct device to dma_alloc_coherent

2020-06-24T15:50:40Z

[ Upstream commit 433efe720674efd9fdbcef78be75793393cf05db ] Currently, ntb->dev is passed to dma_alloc_coherent and dma_free_coherent calls. The returned dma_addr_t is the CPU physical address. This works fine as long as IOMMU is disabled. But when IOMMU is enabled, we need to make sure that IOVA is returned for dma_addr_t. So the correct way to achieve this is by changing the first parameter of dma_alloc_coherent() as ntb->pdev->dev instead. Fixes: 5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support") Signed-off-by: Sanjay R Mehta Signed-off-by: Arindam Nath Signed-off-by: Jon Mason Signed-off-by: Sasha Levin

ntb_perf: pass correct struct device to dma_alloc_coherent

2020-06-24T15:50:40Z

[ Upstream commit 98f4e140264eeb52f22ff05be6b6dd48237255ac ] Currently, ntb->dev is passed to dma_alloc_coherent and dma_free_coherent calls. The returned dma_addr_t is the CPU physical address. This works fine as long as IOMMU is disabled. But when IOMMU is enabled, we need to make sure that IOVA is returned for dma_addr_t. So the correct way to achieve this is by changing the first parameter of dma_alloc_coherent() as ntb->pdev->dev instead. Fixes: 5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support") Signed-off-by: Logan Gunthorpe Signed-off-by: Sanjay R Mehta Signed-off-by: Arindam Nath Signed-off-by: Jon Mason Signed-off-by: Sasha Levin