user/sven/linux.git/drivers/of, branch v4.14.43

earlycon: Use a pointer table to fix __earlycon_table stride

2018-05-01T19:58:24Z

commit dd709e72cb934eefd44de8d9969097173fbf45dc upstream. Commit 99492c39f39f ("earlycon: Fix __earlycon_table stride") tried to fix __earlycon_table stride by forcing the earlycon_id struct alignment to 32 and asking the linker to 32-byte align the __earlycon_table symbol. This fix was based on commit 07fca0e57fca92 ("tracing: Properly align linker defined symbols") which tried a similar fix for the tracing subsystem. However, this fix doesn't quite work because there is no guarantee that gcc will place structures packed into an array format. In fact, gcc 4.9 chooses to 64-byte align these structs by inserting additional padding between the entries because it has no clue that they are supposed to be in an array. If we are unlucky, the linker will assign symbol "__earlycon_table" to a 32-byte aligned address which does not correspond to the 64-byte aligned contents of section "__earlycon_table". To address this same problem, the fix to the tracing system was subsequently re-implemented using a more robust table of pointers approach by commits: 3d56e331b653 ("tracing: Replace syscall_meta_data struct array with pointer array") 654986462939 ("tracepoints: Fix section alignment using pointer array") e4a9ea5ee7c8 ("tracing: Replace trace_event struct array with pointer array") Let's use this same "array of pointers to structs" approach for EARLYCON_TABLE. Fixes: 99492c39f39f ("earlycon: Fix __earlycon_table stride") Signed-off-by: Daniel Kurtz Suggested-by: Aaron Durbin Reviewed-by: Rob Herring Tested-by: Guenter Roeck Reviewed-by: Guenter Roeck Cc: stable Signed-off-by: Greg Kroah-Hartman

of_mdio: avoid MDIO bus removal when a PHY is missing

2018-03-03T09:24:37Z

[ Upstream commit 95f566de0269a0c59fd6a737a147731302136429 ] If one of the child devices is missing the of_mdiobus_register_phy() call will return -ENODEV. When a missing device is encountered the registration of the remaining PHYs is stopped and the MDIO bus will fail to register. Propagate all errors except ENODEV to avoid it. Signed-off-by: Madalin Bucur Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

.gitignore: move .dtb and .dtb.S patterns to the top-level .gitignore

2018-02-13T09:19:46Z

commit 10b62a2f785ab55857380f0c63d9fa468fd8c676 upstream. Most of DT files are compiled under arch/*/boot/dts/, but we have some other directories, like drivers/of/unittest-data/. We often miss to add gitignore patterns per directory. Since there are no source files that end with .dtb or .dtb.S, we can ignore the patterns globally. Signed-off-by: Masahiro Yamada Signed-off-by: Rob Herring Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2017-10-22T02:44:48Z

Pull networking fixes from David Miller: "A little more than usual this time around. Been travelling, so that is part of it. Anyways, here are the highlights: 1) Deal with memcontrol races wrt. listener dismantle, from Eric Dumazet. 2) Handle page allocation failures properly in nfp driver, from Jaku Kicinski. 3) Fix memory leaks in macsec, from Sabrina Dubroca. 4) Fix crashes in pppol2tp_session_ioctl(), from Guillaume Nault. 5) Several fixes in bnxt_en driver, including preventing potential NVRAM parameter corruption from Michael Chan. 6) Fix for KRACK attacks in wireless, from Johannes Berg. 7) rtnetlink event generation fixes from Xin Long. 8) Deadlock in mlxsw driver, from Ido Schimmel. 9) Disallow arithmetic operations on context pointers in bpf, from Jakub Kicinski. 10) Missing sock_owned_by_user() check in sctp_icmp_redirect(), from Xin Long. 11) Only TCP is supported for sockmap, make that explicit with a check, from John Fastabend. 12) Fix IP options state races in DCCP and TCP, from Eric Dumazet. 13) Fix panic in packet_getsockopt(), also from Eric Dumazet. 14) Add missing locked in hv_sock layer, from Dexuan Cui. 15) Various aquantia bug fixes, including several statistics handling cures. From Igor Russkikh et al. 16) Fix arithmetic overflow in devmap code, from John Fastabend. 17) Fix busted socket memory accounting when we get a fault in the tcp zero copy paths. From Willem de Bruijn. 18) Don't leave opt->tot_len uninitialized in ipv6, from Eric Dumazet" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (106 commits) stmmac: Don't access tx_q->dirty_tx before netif_tx_lock ipv6: flowlabel: do not leave opt->tot_len with garbage of_mdio: Fix broken PHY IRQ in case of probe deferral textsearch: fix typos in library helpers rxrpc: Don't release call mutex on error pointer net: stmmac: Prevent infinite loop in get_rx_timestamp_status() net: stmmac: Fix stmmac_get_rx_hwtstamp() net: stmmac: Add missing call to dev_kfree_skb() mlxsw: spectrum_router: Configure TIGCR on init mlxsw: reg: Add Tunneling IPinIP General Configuration Register net: ethtool: remove error check for legacy setting transceiver type soreuseport: fix initialization race net: bridge: fix returning of vlan range op errors sock: correct sk_wmem_queued accounting on efault in tcp zerocopy bpf: add test cases to bpf selftests to cover all access tests bpf: fix pattern matches for direct packet access bpf: fix off by one for range markings with L{T, E} patterns bpf: devmap fix arithmetic overflow in bitmap_size calculation net: aquantia: Bad udp rate on default interrupt coalescing net: aquantia: Enable coalescing management via ethtool interface ...

of_mdio: Fix broken PHY IRQ in case of probe deferral

2017-10-22T02:20:25Z

If an Ethernet PHY is initialized before the interrupt controller it is connected to, a message like the following is printed: irq: no irq domain found for /interrupt-controller@e61c0000 ! However, the actual error is ignored, leading to a non-functional (POLL) PHY interrupt later: Micrel KSZ8041RNLI ee700000.ethernet-ffffffff:01: attached PHY driver [Micrel KSZ8041RNLI] (mii_bus:phy_addr=ee700000.ethernet-ffffffff:01, irq=POLL) Depending on whether the PHY driver will fall back to polling, Ethernet may or may not work. To fix this: 1. Switch of_mdiobus_register_phy() from irq_of_parse_and_map() to of_irq_get(). Unlike the former, the latter returns -EPROBE_DEFER if the interrupt controller is not yet available, so this condition can be detected. Other errors are handled the same as before, i.e. use the passed mdio->irq[addr] as interrupt. 2. Propagate and handle errors from of_mdiobus_register_phy() and of_mdiobus_register_device(). Signed-off-by: Geert Uytterhoeven Signed-off-by: David S. Miller

device property: preserve usecount for node passed to of_fwnode_graph_get_port_parent()

2017-10-12T17:26:14Z

Using CONFIG_OF_DYNAMIC=y uncovered an imbalance in the usecount of the node being passed to of_fwnode_graph_get_port_parent(). Preserve the usecount by using of_get_parent() instead of of_get_next_parent() which don't decrement the usecount of the node passed to it. Fixes: 3b27d00e7b6d7c88 ("device property: Move fwnode graph ops to firmware specific locations") Signed-off-by: Niklas Söderlund Acked-by: Sakari Ailus Signed-off-by: Rob Herring

drivers: of: increase MAX_RESERVED_REGIONS to 32

2017-10-12T17:23:45Z

There are two types of memory reservations firmware can ask the kernel to make in the device tree: static and dynamic. See Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt If you have greater than 16 entries in /reserved-memory (as we do on POWER9 systems) you would get this scary looking error message: [ 0.000000] OF: reserved mem: not enough space all defined regions. This is harmless if all your reservations are static (which with OPAL on POWER9, they are). It is not harmless if you have any dynamic reservations after the 16th. In the first pass over the fdt to find reservations, the child nodes of /reserved-memory are added to a static array in of_reserved_mem.c so that memory can be reserved in a 2nd pass. The array has 16 entries. This is why, on my dual socket POWER9 system, I get that error 4 times with 20 static reservations. We don't have a problem on ppc though, as in arch/powerpc/kernel/prom.c we look at the new style /reserved-ranges property to do reservations, and this logic was introduced in 0962e8004e974 (well before any powernv system shipped). A Google search shows up no occurances of that exact error message, so we're probably safe in that no machine that people use has memory not being reserved when it should be. The simple fix is to bump the length of the array to 32 which "should be enough for everyone(TM)". The simple fix of not recording static allocations in the array would cause problems for devices with "memory-region" properties. A more future-proof fix is likely possible, although more invasive and this simple fix is perfectly suitable in the meantime while a more future-proof fix is developed. Signed-off-by: Stewart Smith Tested-by: Mauricio Faria de Oliveira Signed-off-by: Rob Herring

of: do not leak console options

2017-10-12T17:22:04Z

Do not strdup() console options. It seems that the only reason for it to be strdup()-ed was a compilation warning: printk, UART and console drivers, for some reason, expect char pointer instead of const char pointer. So we can just pass `of_stdout_options', but need to cast it to char pointer. A better fix would be to change printk, console drivers and UART to accept const char `options'; but that will take time - there are lots of drivers to update. The patch also fixes a possible memory leak: add_preferred_console() can fail, but we don't kfree() options. Signed-off-by: Sergey Senozhatsky Reviewed-by: Petr Mladek Signed-off-by: Rob Herring

Merge tag 'dma-mapping-4.14' of git://git.infradead.org/users/hch/dma-mapping

2017-09-12T20:30:06Z

Pull dma-mapping updates from Christoph Hellwig: - removal of the old dma_alloc_noncoherent interface - remove unused flags to dma_declare_coherent_memory - restrict OF DMA configuration to specific physical busses - use the iommu mailing list for dma-mapping questions and patches * tag 'dma-mapping-4.14' of git://git.infradead.org/users/hch/dma-mapping: dma-coherent: fix dma_declare_coherent_memory() logic error ARM: imx: mx31moboard: Remove unused 'dma' variable dma-coherent: remove an unused variable MAINTAINERS: use the iommu list for the dma-mapping subsystem dma-coherent: remove the DMA_MEMORY_MAP and DMA_MEMORY_IO flags dma-coherent: remove the DMA_MEMORY_INCLUDES_CHILDREN flag of: restrict DMA configuration dma-mapping: remove dma_alloc_noncoherent and dma_free_noncoherent i825xx: switch to switch to dma_alloc_attrs au1000_eth: switch to dma_alloc_attrs sgiseeq: switch to dma_alloc_attrs dma-mapping: reduce dma_mapping_error inline bloat