user/sven/linux.git/drivers/of, branch v5.4.122

Revert "fdt: Properly handle "no-map" field in the memory region"

2021-05-14T07:44:33Z

This reverts commit fb326c6ce0dcbb6273202c6e012759754ec8538d. It is not really a fix, and the backport misses dependencies, which breaks existing platforms. Reported-by: Alexandre TORGUE Signed-off-by: Quentin Perret Signed-off-by: Greg Kroah-Hartman

Revert "of/fdt: Make sure no-map does not remove already reserved regions"

2021-05-14T07:44:33Z

This reverts commit 3cbd3038c9155038020560729cde50588311105d. It is not really a fix, and the backport misses dependencies, which breaks existing platforms. Reported-by: Alexandre TORGUE Signed-off-by: Quentin Perret Signed-off-by: Greg Kroah-Hartman

of/fdt: Make sure no-map does not remove already reserved regions

2021-03-04T09:26:28Z

[ Upstream commit 8a5a75e5e9e55de1cef5d83ca3589cb4899193ef ] If the device tree is incorrectly configured, and attempts to define a "no-map" reserved memory that overlaps with the kernel data/code, the kernel would crash quickly after boot, with no obvious clue about the nature of the issue. For example, this would happen if we have the kernel mapped at these addresses (from /proc/iomem): 40000000-41ffffff : System RAM 40080000-40dfffff : Kernel code 40e00000-411fffff : reserved 41200000-413e0fff : Kernel data And we declare a no-map shared-dma-pool region at a fixed address within that range: mem_reserved: mem_region { compatible = "shared-dma-pool"; reg = <0 0x40000000 0 0x01A00000>; no-map; }; To fix this, when removing memory regions at early boot (which is what "no-map" regions do), we need to make sure that the memory is not already reserved. If we do, __reserved_mem_reserve_reg will throw an error: [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'mem_region': base 0x0000000040000000, size 26 MiB and the code that will try to use the region should also fail, later on. We do not do anything for non-"no-map" regions, as memblock explicitly allows reserved regions to overlap, and the commit that this fixes removed the check for that precise reason. [ qperret: fixed conflicts caused by the usage of memblock_mark_nomap ] Fixes: 094cb98179f19b7 ("of/fdt: memblock_reserve /memreserve/ regions in the case of partial overlap") Signed-off-by: Nicolas Boichat Reviewed-by: Stephen Boyd Signed-off-by: Quentin Perret Link: https://lore.kernel.org/r/20210115114544.1830068-3-qperret@google.com Signed-off-by: Rob Herring Signed-off-by: Sasha Levin

fdt: Properly handle "no-map" field in the memory region

2021-03-04T09:26:28Z

[ Upstream commit 86588296acbfb1591e92ba60221e95677ecadb43 ] Mark the memory region with NOMAP flag instead of completely removing it from the memory blocks. That makes the FDT handling consistent with the EFI memory map handling. Cc: Rob Herring Cc: Frank Rowand Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: KarimAllah Ahmed Signed-off-by: Quentin Perret Link: https://lore.kernel.org/r/20210115114544.1830068-2-qperret@google.com Signed-off-by: Rob Herring Signed-off-by: Sasha Levin

of/address: Fix of_node memory leak in of_dma_is_coherent

2020-11-18T18:20:28Z

[ Upstream commit a5bea04fcc0b3c0aec71ee1fd58fd4ff7ee36177 ] Commit dabf6b36b83a ("of: Add OF_DMA_DEFAULT_COHERENT & select it on powerpc") added a check to of_dma_is_coherent which returns early if OF_DMA_DEFAULT_COHERENT is enabled. This results in the of_node_put() being skipped causing a memory leak. Moved the of_node_get() below this check so we now we only get the node if OF_DMA_DEFAULT_COHERENT is not enabled. Fixes: dabf6b36b83a ("of: Add OF_DMA_DEFAULT_COHERENT & select it on powerpc") Signed-off-by: Evan Nimmo Link: https://lore.kernel.org/r/20201110022825.30895-1-evan.nimmo@alliedtelesis.co.nz Signed-off-by: Rob Herring Signed-off-by: Sasha Levin

of: Fix reserved-memory overlap detection

2020-11-10T11:37:29Z

[ Upstream commit ca05f33316559a04867295dd49f85aeedbfd6bfd ] The reserved-memory overlap detection code fails to detect overlaps if either of the regions starts at address 0x0. The code explicitly checks for and ignores such regions, apparently in order to ignore dynamically allocated regions which have an address of 0x0 at this point. These dynamically allocated regions also have a size of 0x0 at this point, so fix this by removing the check and sorting the dynamically allocated regions ahead of any static regions at address 0x0. For example, there are two overlaps in this case but they are not currently reported: foo@0 { reg = <0x0 0x2000>; }; bar@0 { reg = <0x0 0x1000>; }; baz@1000 { reg = <0x1000 0x1000>; }; quux { size = <0x1000>; }; but they are after this patch: OF: reserved mem: OVERLAP DETECTED! bar@0 (0x00000000--0x00001000) overlaps with foo@0 (0x00000000--0x00002000) OF: reserved mem: OVERLAP DETECTED! foo@0 (0x00000000--0x00002000) overlaps with baz@1000 (0x00001000--0x00002000) Signed-off-by: Vincent Whitchurch Link: https://lore.kernel.org/r/ded6fd6b47b58741aabdcc6967f73eca6a3f311e.1603273666.git-series.vincent.whitchurch@axis.com Signed-off-by: Rob Herring Signed-off-by: Sasha Levin

of: of_mdio: Correct loop scanning logic

2020-07-22T07:32:55Z

[ Upstream commit 5a8d7f126c97d04d893f5e5be2b286437a0d01b0 ] Commit 209c65b61d94 ("drivers/of/of_mdio.c:fix of_mdiobus_register()") introduced a break of the loop on the premise that a successful registration should exit the loop. The premise is correct but not to code, because rc && rc != -ENODEV is just a special error condition, that means we would exit the loop even with rc == -ENODEV which is absolutely not correct since this is the error code to indicate to the MDIO bus layer that scanning should continue. Fix this by explicitly checking for rc = 0 as the only valid condition to break out of the loop. Fixes: 209c65b61d94 ("drivers/of/of_mdio.c:fix of_mdiobus_register()") Reviewed-by: Andrew Lunn Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

of: Fix a refcounting bug in __of_attach_node_sysfs()

2020-06-24T15:50:35Z

[ Upstream commit 8a325dd06f2358ea0888e4ff1c9ca4bc23bd53f3 ] The problem in this code is that if kobject_add() fails, then it should call of_node_put(np) to drop the reference count. I've actually moved the of_node_get(np) later in the function to avoid needing to do clean up. Fixes: 5b2c2f5a0ea3 ("of: overlay: add missing of_node_get() in __of_attach_node_sysfs") Signed-off-by: Dan Carpenter Signed-off-by: Rob Herring Signed-off-by: Sasha Levin

of: overlay: kmemleak in dup_and_fixup_symbol_prop()

2020-04-23T08:36:23Z

commit 478ff649b1c8eb2409b1a54fb75eb46f7c29f140 upstream. kmemleak reports several memory leaks from devicetree unittest. This is the fix for problem 4 of 5. target_path was not freed in the non-error path. Fixes: e0a58f3e08d4 ("of: overlay: remove a dependency on device node full_name") Reported-by: Erhard F. Signed-off-by: Frank Rowand Signed-off-by: Rob Herring Signed-off-by: Greg Kroah-Hartman

of: unittest: kmemleak in of_unittest_overlay_high_level()

2020-04-23T08:36:23Z

commit 145fc138f9aae4f9e1331352e301df28e16aed35 upstream. kmemleak reports several memory leaks from devicetree unittest. This is the fix for problem 3 of 5. of_unittest_overlay_high_level() failed to kfree the newly created property when the property named 'name' is skipped. Fixes: 39a751a4cb7e ("of: change overlay apply input data from unflattened to FDT") Reported-by: Erhard F. Signed-off-by: Frank Rowand Signed-off-by: Rob Herring Signed-off-by: Greg Kroah-Hartman