user/sven/linux.git/drivers/of, branch v5.4.76

of: Fix reserved-memory overlap detection

2020-11-10T11:37:29Z

[ Upstream commit ca05f33316559a04867295dd49f85aeedbfd6bfd ] The reserved-memory overlap detection code fails to detect overlaps if either of the regions starts at address 0x0. The code explicitly checks for and ignores such regions, apparently in order to ignore dynamically allocated regions which have an address of 0x0 at this point. These dynamically allocated regions also have a size of 0x0 at this point, so fix this by removing the check and sorting the dynamically allocated regions ahead of any static regions at address 0x0. For example, there are two overlaps in this case but they are not currently reported: foo@0 { reg = <0x0 0x2000>; }; bar@0 { reg = <0x0 0x1000>; }; baz@1000 { reg = <0x1000 0x1000>; }; quux { size = <0x1000>; }; but they are after this patch: OF: reserved mem: OVERLAP DETECTED! bar@0 (0x00000000--0x00001000) overlaps with foo@0 (0x00000000--0x00002000) OF: reserved mem: OVERLAP DETECTED! foo@0 (0x00000000--0x00002000) overlaps with baz@1000 (0x00001000--0x00002000) Signed-off-by: Vincent Whitchurch Link: https://lore.kernel.org/r/ded6fd6b47b58741aabdcc6967f73eca6a3f311e.1603273666.git-series.vincent.whitchurch@axis.com Signed-off-by: Rob Herring Signed-off-by: Sasha Levin

of: of_mdio: Correct loop scanning logic

2020-07-22T07:32:55Z

[ Upstream commit 5a8d7f126c97d04d893f5e5be2b286437a0d01b0 ] Commit 209c65b61d94 ("drivers/of/of_mdio.c:fix of_mdiobus_register()") introduced a break of the loop on the premise that a successful registration should exit the loop. The premise is correct but not to code, because rc && rc != -ENODEV is just a special error condition, that means we would exit the loop even with rc == -ENODEV which is absolutely not correct since this is the error code to indicate to the MDIO bus layer that scanning should continue. Fix this by explicitly checking for rc = 0 as the only valid condition to break out of the loop. Fixes: 209c65b61d94 ("drivers/of/of_mdio.c:fix of_mdiobus_register()") Reviewed-by: Andrew Lunn Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

of: Fix a refcounting bug in __of_attach_node_sysfs()

2020-06-24T15:50:35Z

[ Upstream commit 8a325dd06f2358ea0888e4ff1c9ca4bc23bd53f3 ] The problem in this code is that if kobject_add() fails, then it should call of_node_put(np) to drop the reference count. I've actually moved the of_node_get(np) later in the function to avoid needing to do clean up. Fixes: 5b2c2f5a0ea3 ("of: overlay: add missing of_node_get() in __of_attach_node_sysfs") Signed-off-by: Dan Carpenter Signed-off-by: Rob Herring Signed-off-by: Sasha Levin

of: overlay: kmemleak in dup_and_fixup_symbol_prop()

2020-04-23T08:36:23Z

commit 478ff649b1c8eb2409b1a54fb75eb46f7c29f140 upstream. kmemleak reports several memory leaks from devicetree unittest. This is the fix for problem 4 of 5. target_path was not freed in the non-error path. Fixes: e0a58f3e08d4 ("of: overlay: remove a dependency on device node full_name") Reported-by: Erhard F. Signed-off-by: Frank Rowand Signed-off-by: Rob Herring Signed-off-by: Greg Kroah-Hartman

of: unittest: kmemleak in of_unittest_overlay_high_level()

2020-04-23T08:36:23Z

commit 145fc138f9aae4f9e1331352e301df28e16aed35 upstream. kmemleak reports several memory leaks from devicetree unittest. This is the fix for problem 3 of 5. of_unittest_overlay_high_level() failed to kfree the newly created property when the property named 'name' is skipped. Fixes: 39a751a4cb7e ("of: change overlay apply input data from unflattened to FDT") Reported-by: Erhard F. Signed-off-by: Frank Rowand Signed-off-by: Rob Herring Signed-off-by: Greg Kroah-Hartman

of: unittest: kmemleak in of_unittest_platform_populate()

2020-04-23T08:36:23Z

commit 216830d2413cc61be3f76bc02ffd905e47d2439e upstream. kmemleak reports several memory leaks from devicetree unittest. This is the fix for problem 2 of 5. of_unittest_platform_populate() left an elevated reference count for grandchild nodes (which are platform devices). Fix the platform device reference counts so that the memory will be freed. Fixes: fb2caa50fbac ("of/selftest: add testcase for nodes with same name and address") Reported-by: Erhard F. Signed-off-by: Frank Rowand Signed-off-by: Rob Herring Signed-off-by: Greg Kroah-Hartman

of: unittest: kmemleak on changeset destroy

2020-04-23T08:36:22Z

commit b3fb36ed694b05738d45218ea72cf7feb10ce2b1 upstream. kmemleak reports several memory leaks from devicetree unittest. This is the fix for problem 1 of 5. of_unittest_changeset() reaches deeply into the dynamic devicetree functions. Several nodes were left with an elevated reference count and thus were not properly cleaned up. Fix the reference counts so that the memory will be freed. Fixes: 201c910bd689 ("of: Transactional DT support.") Reported-by: Erhard F. Signed-off-by: Frank Rowand Signed-off-by: Rob Herring Signed-off-by: Greg Kroah-Hartman

drivers/of/of_mdio.c:fix of_mdiobus_register()

2020-04-01T09:01:51Z

[ Upstream commit 209c65b61d94344522c41a83cd6ce51aac5fd0a4 ] When registers a phy_device successful, should terminate the loop or the phy_device would be registered in other addr. If there are multiple PHYs without reg properties, it will go wrong. Signed-off-by: Dajun Jin Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

of: Add OF_DMA_DEFAULT_COHERENT & select it on powerpc

2020-02-11T12:35:25Z

commit dabf6b36b83a18d57e3d4b9d50544ed040d86255 upstream. There's an OF helper called of_dma_is_coherent(), which checks if a device has a "dma-coherent" property to see if the device is coherent for DMA. But on some platforms devices are coherent by default, and on some platforms it's not possible to update existing device trees to add the "dma-coherent" property. So add a Kconfig symbol to allow arch code to tell of_dma_is_coherent() that devices are coherent by default, regardless of the presence of the property. Select that symbol on powerpc when NOT_COHERENT_CACHE is not set, ie. when the system has a coherent cache. Fixes: 92ea637edea3 ("of: introduce of_dma_is_coherent() helper") Cc: stable@vger.kernel.org # v3.16+ Reported-by: Christian Zigotzky Tested-by: Christian Zigotzky Signed-off-by: Michael Ellerman Reviewed-by: Ulf Hansson Signed-off-by: Rob Herring Signed-off-by: Greg Kroah-Hartman

of: overlay: add_changeset_property() memory leak

2020-01-09T09:20:03Z

commit 637392a8506a3a7dd24ab9094a14f7522adb73b4 upstream. No changeset entries are created for #address-cells and #size-cells properties, but the duplicated properties are never freed. This results in a memory leak which is detected by kmemleak: unreferenced object 0x85887180 (size 64): backtrace: kmem_cache_alloc_trace+0x1fb/0x1fc __of_prop_dup+0x25/0x7c add_changeset_property+0x17f/0x370 build_changeset_next_level+0x29/0x20c of_overlay_fdt_apply+0x32b/0x6b4 ... Fixes: 6f75118800ac ("of: overlay: validate overlay properties #address-cells and #size-cells") Reported-by: Vincent Whitchurch Signed-off-by: Frank Rowand Tested-by: Vincent Whitchurch Signed-off-by: Rob Herring Signed-off-by: Greg Kroah-Hartman