user/sven/linux.git/drivers/parisc, branch v4.14.270

parisc: Fix sglist access in ccio-dma.c

2022-02-23T10:57:32Z

commit d7da660cab47183cded65e11b64497d0f56c6edf upstream. This patch implements the same bug fix to ccio-dma.c as to sba_iommu.c. It ensures that only the allocated entries of the sglist are accessed. Signed-off-by: John David Anglin Cc: stable@vger.kernel.org Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman

parisc: Fix data TLB miss in sba_unmap_sg

2022-02-23T10:57:32Z

commit b7d6f44a0fa716a82969725516dc0b16bc7cd514 upstream. Rolf Eike Beer reported the following bug: [1274934.746891] Bad Address (null pointer deref?): Code=15 (Data TLB miss fault) at addr 0000004140000018 [1274934.746891] CPU: 3 PID: 5549 Comm: cmake Not tainted 5.15.4-gentoo-parisc64 #4 [1274934.746891] Hardware name: 9000/785/C8000 [1274934.746891] [1274934.746891] YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI [1274934.746891] PSW: 00001000000001001111111000001110 Not tainted [1274934.746891] r00-03 000000ff0804fe0e 0000000040bc9bc0 00000000406760e4 0000004140000000 [1274934.746891] r04-07 0000000040b693c0 0000004140000000 000000004a2b08b0 0000000000000001 [1274934.746891] r08-11 0000000041f98810 0000000000000000 000000004a0a7000 0000000000000001 [1274934.746891] r12-15 0000000040bddbc0 0000000040c0cbc0 0000000040bddbc0 0000000040bddbc0 [1274934.746891] r16-19 0000000040bde3c0 0000000040bddbc0 0000000040bde3c0 0000000000000007 [1274934.746891] r20-23 0000000000000006 000000004a368950 0000000000000000 0000000000000001 [1274934.746891] r24-27 0000000000001fff 000000000800000e 000000004a1710f0 0000000040b693c0 [1274934.746891] r28-31 0000000000000001 0000000041f988b0 0000000041f98840 000000004a171118 [1274934.746891] sr00-03 00000000066e5800 0000000000000000 0000000000000000 00000000066e5800 [1274934.746891] sr04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [1274934.746891] [1274934.746891] IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000406760e8 00000000406760ec [1274934.746891] IIR: 48780030 ISR: 0000000000000000 IOR: 0000004140000018 [1274934.746891] CPU: 3 CR30: 00000040e3a9c000 CR31: ffffffffffffffff [1274934.746891] ORIG_R28: 0000000040acdd58 [1274934.746891] IAOQ[0]: sba_unmap_sg+0xb0/0x118 [1274934.746891] IAOQ[1]: sba_unmap_sg+0xb4/0x118 [1274934.746891] RP(r2): sba_unmap_sg+0xac/0x118 [1274934.746891] Backtrace: [1274934.746891] [<00000000402740cc>] dma_unmap_sg_attrs+0x6c/0x70 [1274934.746891] [<000000004074d6bc>] scsi_dma_unmap+0x54/0x60 [1274934.746891] [<00000000407a3488>] mptscsih_io_done+0x150/0xd70 [1274934.746891] [<0000000040798600>] mpt_interrupt+0x168/0xa68 [1274934.746891] [<0000000040255a48>] __handle_irq_event_percpu+0xc8/0x278 [1274934.746891] [<0000000040255c34>] handle_irq_event_percpu+0x3c/0xd8 [1274934.746891] [<000000004025ecb4>] handle_percpu_irq+0xb4/0xf0 [1274934.746891] [<00000000402548e0>] generic_handle_irq+0x50/0x70 [1274934.746891] [<000000004019a254>] call_on_stack+0x18/0x24 [1274934.746891] [1274934.746891] Kernel panic - not syncing: Bad Address (null pointer deref?) The bug is caused by overrunning the sglist and incorrectly testing sg_dma_len(sglist) before nents. Normally this doesn't cause a crash, but in this case sglist crossed a page boundary. This occurs in the following code: while (sg_dma_len(sglist) && nents--) { The fix is simply to test nents first and move the decrement of nents into the loop. Reported-by: Rolf Eike Beer Signed-off-by: John David Anglin Cc: stable@vger.kernel.org Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman

parisc: pdc_stable: Fix memory leak in pdcs_register_pathentries

2022-01-27T08:01:00Z

commit d24846a4246b6e61ecbd036880a4adf61681d241 upstream. kobject_init_and_add() takes reference even when it fails. According to the doc of kobject_init_and_add()： If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Fix memory leak by calling kobject_put(). Fixes: 73f368cf679b ("Kobject: change drivers/parisc/pdc_stable.c to use kobject_init_and_add") Signed-off-by: Miaoqian Lin Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman

parisc: Move pci_dev_is_behind_card_dino to where it is used

2021-09-26T11:37:29Z

[ Upstream commit 907872baa9f1538eed02ec737b8e89eba6c6e4b9 ] parisc build test images fail to compile with the following error. drivers/parisc/dino.c:160:12: error: 'pci_dev_is_behind_card_dino' defined but not used Move the function just ahead of its only caller to avoid the error. Fixes: 5fa1659105fa ("parisc: Disable HP HSC-PCI Cards to prevent kernel crash") Cc: Helge Deller Signed-off-by: Guenter Roeck Signed-off-by: Helge Deller Signed-off-by: Sasha Levin

parisc: mask out enable and reserved bits from sba imask

2020-08-21T07:48:16Z

commit 5b24993c21cbf2de11aff077a48c5cb0505a0450 upstream. When using kexec the SBA IOMMU IBASE might still have the RE bit set. This triggers a WARN_ON when trying to write back the IBASE register later, and it also makes some mask calculations fail. Cc: Signed-off-by: Sven Schnelle Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman

parisc: Disable HP HSC-PCI Cards to prevent kernel crash

2019-10-05T10:48:05Z

commit 5fa1659105fac63e0f3c199b476025c2e04111ce upstream. The HP Dino PCI controller chip can be used in two variants: as on-board controller (e.g. in B160L), or on an Add-On card ("Card-Mode") to bridge PCI components to systems without a PCI bus, e.g. to a HSC/GSC bus. One such Add-On card is the HP HSC-PCI Card which has one or more DEC Tulip PCI NIC chips connected to the on-card Dino PCI controller. Dino in Card-Mode has a big disadvantage: All PCI memory accesses need to go through the DINO_MEM_DATA register, so Linux drivers will not be able to use the ioremap() function. Without ioremap() many drivers will not work, one example is the tulip driver which then simply crashes the kernel if it tries to access the ports on the HP HSC card. This patch disables the HP HSC card if it finds one, and as such fixes the kernel crash on a HP D350/2 machine. Signed-off-by: Helge Deller Noticed-by: Phil Scarr Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

parisc: Use implicit space register selection for loading the coherence index of I/O pdirs

2019-06-11T10:21:47Z

commit 63923d2c3800919774f5c651d503d1dd2adaddd5 upstream. We only support I/O to kernel space. Using %sr1 to load the coherence index may be racy unless interrupts are disabled. This patch changes the code used to load the coherence index to use implicit space register selection. This saves one instruction and eliminates the race. Tested on rp3440, c8000 and c3750. Signed-off-by: John David Anglin Cc: stable@vger.kernel.org Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman

parisc: Skip registering LED when running in QEMU

2019-05-25T16:25:18Z

commit b438749044356dd1329c45e9b5a9377b6ea13eb2 upstream. No need to spend CPU cycles when we run on QEMU. Signed-off-by: Helge Deller CC: stable@vger.kernel.org # v4.9+ Signed-off-by: Greg Kroah-Hartman

parisc/pci: Switch LBA PCI bus from Hard Fail to Soft Fail mode

2018-05-30T05:52:28Z

[ Upstream commit b845f66f78bf42a4ce98e5cfe0e94fab41dd0742 ] Carlo Pisani noticed that his C3600 workstation behaved unstable during heavy I/O on the PCI bus with a VIA VT6421 IDE/SATA PCI card. To avoid such instability, this patch switches the LBA PCI bus from Hard Fail mode into Soft Fail mode. In this mode the bus will return -1UL for timed out MMIO transactions, which is exactly how the x86 (and most other architectures) PCI busses behave. This patch is based on a proposal by Grant Grundler and Kyle McMartin 10 years ago: https://www.spinics.net/lists/linux-parisc/msg01027.html Cc: Carlo Pisani Cc: Kyle McMartin Reviewed-by: Grant Grundler Signed-off-by: Helge Deller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

parisc: Hide Diva-built-in serial aux and graphics card

2017-12-29T16:53:47Z

commit bcf3f1752a622f1372d3252d0fea8855d89812e7 upstream. Diva GSP card has built-in serial AUX port and ATI graphic card which simply don't work and which both don't have external connectors. User Guides even mention that those devices shouldn't be used. So, prevent that Linux drivers try to enable those devices. Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman