user/sven/linux.git/drivers/pci/remove.c, branch v3.11.2

PCI: Add pcibios hooks for adding and removing PCI buses

2013-04-12T21:38:25Z

On ACPI-based platforms, the pci_slot driver creates PCI slot devices according to information from ACPI tables by registering an ACPI PCI subdriver. The ACPI PCI subdriver will only be called when creating/ destroying PCI root buses, and it won't be called when hot-plugging P2P bridges. It may cause stale PCI slot devices after hot-removing a P2P bridge if that bridge has associated PCI slots. And the acpiphp driver has the same issue too. This patch introduces two hook points into the PCI core, which will be invoked when creating/destroying PCI buses for PCI host and P2P bridges. They could be used to setup/destroy platform dependent stuff in a unified way, both at boot time and for PCI hotplug operations. Signed-off-by: Jiang Liu Signed-off-by: Yijing Wang Signed-off-by: Bjorn Helgaas Reviewed-by: Yinghai Lu Cc: "Rafael J. Wysocki" Cc: Toshi Kani Cc: Tony Luck Cc: Fenghua Yu Cc: Thomas Gleixner Cc: Ingo Molnar Cc: "H. Peter Anvin" Cc: Myron Stowe

PCI: When removing bus, always remove legacy files & unregister

2013-04-12T20:57:02Z

We always call device_register() and pci_create_legacy_files() for a new bus before handing out the "struct pci_bus *". Therefore, there's no possiblity of removing the bus with pci_remove_bus() before those calls have been made, so we don't need to check "bus->is_added" before calling pci_remove_legacy_files() and device_unregister(). [bhelgaas: changelog] Signed-off-by: Jiang Liu Signed-off-by: Yijing Wang Signed-off-by: Bjorn Helgaas Reviewed-by: Yinghai Lu Cc: "Rafael J. Wysocki" Cc: Toshi Kani

Merge tag 'pci-v3.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2013-02-26T05:18:18Z

Pull PCI changes from Bjorn Helgaas: "Host bridge hotplug - Major overhaul of ACPI host bridge add/start (Rafael Wysocki, Yinghai Lu) - Major overhaul of PCI/ACPI binding (Rafael Wysocki, Yinghai Lu) - Split out ACPI host bridge and ACPI PCI device hotplug (Yinghai Lu) - Stop caching _PRT and make independent of bus numbers (Yinghai Lu) PCI device hotplug - Clean up cpqphp dead code (Sasha Levin) - Disable ARI unless device and upstream bridge support it (Yijing Wang) - Initialize all hot-added devices (not functions 0-7) (Yijing Wang) Power management - Don't touch ASPM if disabled (Joe Lawrence) - Fix ASPM link state management (Myron Stowe) Miscellaneous - Fix PCI_EXP_FLAGS accessor (Alex Williamson) - Disable Bus Master in pci_device_shutdown (Konstantin Khlebnikov) - Document hotplug resource and MPS parameters (Yijing Wang) - Add accessor for PCIe capabilities (Myron Stowe) - Drop pciehp suspend/resume messages (Paul Bolle) - Make pci_slot built-in only (not a module) (Jiang Liu) - Remove unused PCI/ACPI bind ops (Jiang Liu) - Removed used pci_root_bus (Bjorn Helgaas)" * tag 'pci-v3.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (51 commits) PCI/ACPI: Don't cache _PRT, and don't associate them with bus numbers PCI: Fix PCI Express Capability accessors for PCI_EXP_FLAGS ACPI / PCI: Make pci_slot built-in only, not a module PCI/PM: Clear state_saved during suspend PCI: Use atomic_inc_return() rather than atomic_add_return() PCI: Catch attempts to disable already-disabled devices PCI: Disable Bus Master unconditionally in pci_device_shutdown() PCI: acpiphp: Remove dead code for PCI host bridge hotplug PCI: acpiphp: Create companion ACPI devices before creating PCI devices PCI: Remove unused "rc" in virtfn_add_bus() PCI: pciehp: Drop suspend/resume ENTRY messages PCI/ASPM: Don't touch ASPM if forcibly disabled PCI/ASPM: Deallocate upstream link state even if device is not PCIe PCI: Document MPS parameters pci=pcie_bus_safe, pci=pcie_bus_perf, etc PCI: Document hpiosize= and hpmemsize= resource reservation parameters PCI: Use PCI Express Capability accessor PCI: Introduce accessor to retrieve PCIe Capabilities Register PCI: Put pci_dev in device tree as early as possible PCI: Skip attaching driver in device_add() PCI: acpiphp: Keep driver loaded even if no slots found ...

PCI/PM: Clean up PME state when removing a device

2013-02-13T18:58:02Z

Devices are added to pci_pme_list when drivers use pci_enable_wake() or pci_wake_from_d3(), but they aren't removed from the list unless the driver explicitly disables wakeup. Many drivers never disable wakeup, so their devices remain on the list even after they are removed, e.g., via hotplug. A subsequent PME poll will oops when it tries to touch the device. This patch disables PME# on a device before removing it, which removes the device from pci_pme_list. This is safe even if the device never had PME# enabled. This oops can be triggered by unplugging a Thunderbolt ethernet adapter on a Macbook Pro, as reported by Daniel below. [bhelgaas: changelog] Reference: http://lkml.kernel.org/r/CAMVG2svG21yiM1wkH4_2pen2n+cr2-Zv7TbH3Gj+8MwevZjDbw@mail.gmail.com Reported-and-tested-by: Daniel J Blueman Signed-off-by: Rafael J. Wysocki Signed-off-by: Bjorn Helgaas CC: stable@vger.kernel.org

PCI: Make device create/destroy logic symmetric

2013-01-25T21:42:06Z

According to device model documentation, the way to create/destroy PCI devices should be symmetric. The rule is to either use 1) device_register()/device_unregister() or 2) device_initialize()/device_add()/device_del()/put_device(). So change PCI core logic to follow the rule and get rid of the redundant pci_dev_get()/pci_dev_put() pair. Signed-off-by: Jiang Liu Signed-off-by: Yinghai Lu Signed-off-by: Bjorn Helgaas Acked-by: Rafael J. Wysocki

PCI: Add pci_stop_and_remove_root_bus()

2012-11-03T22:26:37Z

It supports both PCI root bus and PCI bus under PCI bridge. Signed-off-by: Yinghai Lu Signed-off-by: Bjorn Helgaas

PCI: Stop all children first, before removing all children

2012-09-20T23:37:23Z

This restores the previous behavior of stopping all child devices before removing any of them. The current SR-IOV design, where removing the PF also drops references on all the VFs, depends on having the VFs continue to exist after having been stopped. [bhelgaas: changelog] Signed-off-by: Yinghai Lu Signed-off-by: Bjorn Helgaas

PCI: Leave normal LIST_POISON in deleted list entries

2012-08-22T17:34:38Z

list_del() already sets next/prev to LIST_POISON1/LIST_POISON2, so we don't need to do anything special here to prevent further list accesses. Tested-by: Yijing Wang Signed-off-by: Bjorn Helgaas Acked-by: Yinghai Lu

PCI: Rename local variables to conventional names

2012-08-22T17:34:38Z

"bus" is the conventional name for a "struct pci_bus *" variable. Tested-by: Yijing Wang Signed-off-by: Bjorn Helgaas Acked-by: Yinghai Lu

PCI: Remove unused, commented-out, code

2012-08-22T17:31:53Z

This removes unused code that was already commented out. Tested-by: Yijing Wang Signed-off-by: Bjorn Helgaas Acked-by: Yinghai Lu