user/sven/linux.git/drivers/pci, branch v3.6.9

PCI/PM: Fix proc config reg access for D3cold and bridge suspending

2012-11-26T20:14:06Z

commit b3c32c4f9565f93407921c0d8a4458042eb8998e upstream. In https://bugzilla.kernel.org/show_bug.cgi?id=48981 Peter reported that /proc/bus/pci/??/??.? does not work for 3.6. This is because the device configuration space registers are not accessible if the corresponding parent bridge is suspended or the device is put into D3cold state. This is the same as /sys/bus/pci/devices/0000:??:??.?/config access issue. So the function used to solve sysfs issue is used to solve this issue. This patch moves pci_config_pm_runtime_get()/_put() from pci/pci-sysfs.c to pci/pci.c and makes them extern so they can be used by both the sysfs and proc paths. [bhelgaas: changelog, references, reporters] Reference: https://bugzilla.kernel.org/show_bug.cgi?id=48981 Reference: https://bugzilla.kernel.org/show_bug.cgi?id=49031 Reported-by: Forrest Loomis Reported-by: Peter Reported-by: Micael Dias Signed-off-by: Huang Ying Signed-off-by: Bjorn Helgaas Acked-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

PCI/PM: Resume device before shutdown

2012-11-26T20:14:06Z

commit 3ff2de9ba1a2e22e548979dbcd46e999b22c93d8 upstream. Some actions during shutdown need device to be in D0 state, such as MSI shutdown etc, so resume device before shutdown. Without this patch, a device may not be enumerated after a kexec because the corresponding bridge is not in D0, so that configuration space of the device is not accessible. Signed-off-by: Huang Ying Signed-off-by: Bjorn Helgaas Acked-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

PCI: Check P2P bridge for invalid secondary/subordinate range

2012-10-12T20:50:23Z

commit 1965f66e7db08d1ebccd24a59043eba826cc1ce8 upstream. For bridges with "secondary > subordinate", i.e., invalid bus number apertures, we don't enumerate anything behind the bridge unless the user specified "pci=assign-busses". This patch makes us automatically try to reassign the downstream bus numbers in this case (just for that bridge, not for all bridges as "pci=assign-busses" does). We don't discover all the devices on the Intel DP43BF motherboard without this change (or "pci=assign-busses") because its BIOS configures a bridge as: pci 0000:00:1e.0: PCI bridge to [bus 20-08] (subtractive decode) [bhelgaas: changelog, change message to dev_info] Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=18412 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=625754 Reported-by: Brian C. Huffman Reported-by: VL Tested-by: VL Signed-off-by: Yinghai Lu Signed-off-by: Bjorn Helgaas

PCI: Don't print anything while decoding is disabled

2012-08-23T16:53:08Z

If we try to print to the console device while its decoding is disabled, the system will hang. Reported-and-tested-by: Olof Johansson Signed-off-by: Bjorn Helgaas Acked-by: Olof Johansson

PCI/PM: Fix config reg access for D3cold and bridge suspending

2012-08-21T23:34:24Z

This patch fixes the following bug: http://marc.info/?l=linux-pci&m=134338059022620&w=2 Where lspci does not work properly if a device and the corresponding parent bridge (such as PCIe port) is suspended. This is because the device configuration space registers will be not accessible if the corresponding parent bridge is suspended or the device is put into D3cold state. To solve the issue, the bridge/PCIe port connected to the device is put into active state before read/write configuration space registers. If the device is in D3cold state, it will be put into active state too. To avoid resume/suspend PCIe port for each configuration register read/write, a small delay is added before the PCIe port to go suspended. Reported-by: Bjorn Mork Signed-off-by: Huang Ying Signed-off-by: Bjorn Helgaas Reviewed-by: Rafael J. Wysocki

PCI/PM: Keep parent bridge active when probing device

2012-08-21T23:32:07Z

This patch fixes the following bug: http://marc.info/?l=linux-pci&m=134329923124234&w=2 The root cause of the bug is as follow. If a device is not bound with the corresponding driver, the device runtime PM will be disabled and the device will be put into suspended state. So that, the bridge/PCIe port connected to it may be put into suspended and low power state. When do probing for the device later, because the bridge/PCIe port connected to it is in low power state, the IO access to device may fail. To solve the issue, the bridge/PCIe port connected to the device is put into active state before probing. Reported-by: Bjorn Mork Signed-off-by: Huang Ying Signed-off-by: Bjorn Helgaas Reviewed-by: Rafael J. Wysocki

PCI/PM: Enable D3/D3cold by default for most devices

2012-08-21T23:31:40Z

This patch fixes the following bug: http://marc.info/?l=linux-usb&m=134318961120825&w=2 Originally, device lower power states include D1, D2, D3. After that, D3 is further divided into D3hot and D3cold. To support both scenario safely, original D3 is mapped to D3cold. When adding D3cold support, because worry about some device may have broken D3cold support, D3cold is disabled by default. This disable D3 on original platform too. But some original platform may only have working D3, but no working D1, D2. The root cause of the above bug is it too. To deal with this, this patch enables D3/D3cold by default for most devices. This restores the original behavior. For some devices that suspected to have broken D3cold support, such as PCIe port, D3cold is disabled by default. Reported-by: Bjorn Mork Signed-off-by: Huang Ying Signed-off-by: Bjorn Helgaas Reviewed-by: Rafael J. Wysocki

PCI: EHCI: Fix crash during hibernation on ASUS computers

2012-08-15T17:51:19Z

Commit dbf0e4c (PCI: EHCI: fix crash during suspend on ASUS computers) added a workaround for an ASUS suspend issue related to USB EHCI and a bug in a number of ASUS BIOSes that attempt to shut down the EHCI controller during system suspend if its PCI command register doesn't contain 0 at that time. It turns out that the same workaround is necessary in the analogous hibernation code path, so add it. References: https://bugzilla.kernel.org/show_bug.cgi?id=45811 Reported-and-tested-by: Oleksij Rempel Signed-off-by: Rafael J. Wysocki Signed-off-by: Bjorn Helgaas Cc: stable@vger.kernel.org

PCI / PM: Fix D3/D3cold/D4 messages printed by acpi_pci_set_power_state()

2012-08-15T17:46:18Z

If a PCI device is put into D3_cold by acpi_bus_set_power(), the message printed by acpi_pci_set_power_state() says that its power state has been changed to D4, which doesn't make sense. In turn, if the device is put into D3_hot, the message simply says "D3" without specifying the variant of the D3 state. Fix this by using the pci_power_name() macro for printing the state name instead of building it from the numeric value corresponding to the given state directly. Signed-off-by: Rafael J. Wysocki Signed-off-by: Bjorn Helgaas

Merge tag 'for-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2012-07-24T23:17:07Z

Pull PCI changes from Bjorn Helgaas: "Host bridge hotplug: - Add MMCONFIG support for hot-added host bridges (Jiang Liu) Device hotplug: - Move fixups from __init to __devinit (Sebastian Andrzej Siewior) - Call FINAL fixups for hot-added devices, too (Myron Stowe) - Factor out generic code for P2P bridge hot-add (Yinghai Lu) - Remove all functions in a slot, not just those with _EJx (Amos Kong) Dynamic resource management: - Track bus number allocation (struct resource tree per domain) (Yinghai Lu) - Make P2P bridge 1K I/O windows work with resource reassignment (Bjorn Helgaas, Yinghai Lu) - Disable decoding while updating 64-bit BARs (Bjorn Helgaas) Power management: - Add PCIe runtime D3cold support (Huang Ying) Virtualization: - Add VFIO infrastructure (ACS, DMA source ID quirks) (Alex Williamson) - Add quirks for devices with broken INTx masking (Jan Kiszka) Miscellaneous: - Fix some PCI Express capability version issues (Myron Stowe) - Factor out some arch code with a weak, generic, pcibios_setup() (Myron Stowe)" * tag 'for-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (122 commits) PCI: hotplug: ensure a consistent return value in error case PCI: fix undefined reference to 'pci_fixup_final_inited' PCI: build resource code for M68K architecture PCI: pciehp: remove unused pciehp_get_max_lnk_width(), pciehp_get_cur_lnk_width() PCI: reorder __pci_assign_resource() (no change) PCI: fix truncation of resource size to 32 bits PCI: acpiphp: merge acpiphp_debug and debug PCI: acpiphp: remove unused res_lock sparc/PCI: replace pci_cfg_fake_ranges() with pci_read_bridge_bases() PCI: call final fixups hot-added devices PCI: move final fixups from __init to __devinit x86/PCI: move final fixups from __init to __devinit MIPS/PCI: move final fixups from __init to __devinit PCI: support sizing P2P bridge I/O windows with 1K granularity PCI: reimplement P2P bridge 1K I/O windows (Intel P64H2) PCI: disable MEM decoding while updating 64-bit MEM BARs PCI: leave MEM and IO decoding disabled during 64-bit BAR sizing, too PCI: never discard enable/suspend/resume_early/resume fixups PCI: release temporary reference in __nv_msi_ht_cap_quirk() PCI: restructure 'pci_do_fixups()' ...