user/sven/linux.git/drivers/perf, branch v5.18.13

arm_pmu: Validate single/group leader events

2022-04-13T10:48:45Z

In the case where there is only a cycle counter available (i.e. PMCR_EL0.N is 0) and an event other than CPU cycles is opened, the open should fail as the event can never possibly be scheduled. However, the event validation when an event is opened is skipped when the group leader is opened. Fix this by always validating the group leader events. Reported-by: Al Grant Cc: Will Deacon Cc: Mark Rutland Signed-off-by: Rob Herring Acked-by: Mark Rutland Link: https://lore.kernel.org/r/20220408203330.4014015-1-robh@kernel.org Cc: Signed-off-by: Will Deacon

perf/imx_ddr: Fix undefined behavior due to shift overflowing the constant

2022-04-08T13:17:57Z

Fix: In file included from :0:0: In function ‘ddr_perf_counter_enable’, inlined from ‘ddr_perf_irq_handler’ at drivers/perf/fsl_imx8_ddr_perf.c:651:2: ././include/linux/compiler_types.h:352:38: error: call to ‘__compiletime_assert_729’ \ declared with attribute error: FIELD_PREP: mask is not constant _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) ... See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory details as to why it triggers with older gccs only. Signed-off-by: Borislav Petkov Cc: Frank Li Cc: Will Deacon Cc: Mark Rutland Cc: Shawn Guo Cc: Sascha Hauer Cc: Pengutronix Kernel Team Cc: Fabio Estevam Cc: NXP Linux Team Cc: linux-arm-kernel@lists.infradead.org Acked-by: Will Deacon Link: https://lore.kernel.org/r/20220405151517.29753-10-bp@alien8.de Signed-off-by: Will Deacon

perf: MARVELL_CN10K_DDR_PMU should depend on ARCH_THUNDER

2022-04-04T09:51:20Z

The Marvell CN10K DRAM Subsystem (DSS) performance monitor is only present on Marvell CN10K SoCs. Hence add a dependency on ARCH_THUNDER, to prevent asking the user about this driver when configuring a kernel without Cavium Thunder (incl. Marvell CN10K) SoC support, Fixes: 68fa55f0e05c ("perf/marvell: cn10k DDR perf event core ownership") Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/18bfd6e1bcf67db7ea656d684a8bbb68261eeb54.1648559364.git.geert+renesas@glider.be Signed-off-by: Will Deacon

perf: qcom_l2_pmu: fix an incorrect NULL check on list iterator

2022-04-04T09:50:02Z

The bug is here: return cluster; The list iterator value 'cluster' will *always* be set and non-NULL by list_for_each_entry(), so it is incorrect to assume that the iterator value will be NULL if the list is empty or no element is found. To fix the bug, return 'cluster' when found, otherwise return NULL. Cc: stable@vger.kernel.org Fixes: 21bdbb7102ed ("perf: add qcom l2 cache perf events driver") Signed-off-by: Xiaomeng Tong Link: https://lore.kernel.org/r/20220327055733.4070-1-xiam0nd.tong@gmail.com Signed-off-by: Will Deacon

Merge tag 'riscv-for-linus-5.18-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

2022-03-25T17:11:38Z

Pull RISC-V updates from Palmer Dabbelt: - Support for Sv57-based virtual memory. - Various improvements for the MicroChip PolarFire SOC and the associated Icicle dev board, which should allow upstream kernels to boot without any additional modifications. - An improved memmove() implementation. - Support for the new Ssconfpmf and SBI PMU extensions, which allows for a much more useful perf implementation on RISC-V systems. - Support for restartable sequences. * tag 'riscv-for-linus-5.18-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (36 commits) rseq/selftests: Add support for RISC-V RISC-V: Add support for restartable sequence MAINTAINERS: Add entry for RISC-V PMU drivers Documentation: riscv: Remove the old documentation RISC-V: Add sscofpmf extension support RISC-V: Add perf platform driver based on SBI PMU extension RISC-V: Add RISC-V SBI PMU extension definitions RISC-V: Add a simple platform driver for RISC-V legacy perf RISC-V: Add a perf core library for pmu drivers RISC-V: Add CSR encodings for all HPMCOUNTERS RISC-V: Remove the current perf implementation RISC-V: Improve /proc/cpuinfo output for ISA extensions RISC-V: Do no continue isa string parsing without correct XLEN RISC-V: Implement multi-letter ISA extension probing framework RISC-V: Extract multi-letter extension names from "riscv, isa" RISC-V: Minimal parser for "riscv, isa" strings RISC-V: Correctly print supported extensions riscv: Fixed misaligned memory access. Fixed pointer comparison. MAINTAINERS: update riscv/microchip entry riscv: dts: microchip: add new peripherals to icicle kit device tree ...

Merge tag 'iommu-updates-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

2022-03-25T02:48:57Z

Pull iommu updates from Joerg Roedel: - IOMMU Core changes: - Removal of aux domain related code as it is basically dead and will be replaced by iommu-fd framework - Split of iommu_ops to carry domain-specific call-backs separatly - Cleanup to remove useless ops->capable implementations - Improve 32-bit free space estimate in iova allocator - Intel VT-d updates: - Various cleanups of the driver - Support for ATS of SoC-integrated devices listed in ACPI/SATC table - ARM SMMU updates: - Fix SMMUv3 soft lockup during continuous stream of events - Fix error path for Qualcomm SMMU probe() - Rework SMMU IRQ setup to prepare the ground for PMU support - Minor cleanups and refactoring - AMD IOMMU driver: - Some minor cleanups and error-handling fixes - Rockchip IOMMU driver: - Use standard driver registration - MSM IOMMU driver: - Minor cleanup and change to standard driver registration - Mediatek IOMMU driver: - Fixes for IOTLB flushing logic * tag 'iommu-updates-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (47 commits) iommu/amd: Improve amd_iommu_v2_exit() iommu/amd: Remove unused struct fault.devid iommu/amd: Clean up function declarations iommu/amd: Call memunmap in error path iommu/arm-smmu: Account for PMU interrupts iommu/vt-d: Enable ATS for the devices in SATC table iommu/vt-d: Remove unused function intel_svm_capable() iommu/vt-d: Add missing "__init" for rmrr_sanity_check() iommu/vt-d: Move intel_iommu_ops to header file iommu/vt-d: Fix indentation of goto labels iommu/vt-d: Remove unnecessary prototypes iommu/vt-d: Remove unnecessary includes iommu/vt-d: Remove DEFER_DEVICE_DOMAIN_INFO iommu/vt-d: Remove domain and devinfo mempool iommu/vt-d: Remove iova_cache_get/put() iommu/vt-d: Remove finding domain in dmar_insert_one_dev_info() iommu/vt-d: Remove intel_iommu::domains iommu/mediatek: Always tlb_flush_all when each PM resume iommu/mediatek: Add tlb_lock in tlb_flush_all iommu/mediatek: Remove the power status checking in tlb flush all ...

RISC-V: Add sscofpmf extension support

2022-03-21T22:01:09Z

The sscofpmf extension allows counter overflow and filtering for programmable counters. Enable the perf driver to handle the overflow interrupt. The overflow interrupt is a hart local interrupt. Thus, per cpu overflow interrupts are setup as a child under the root INTC irq domain. Signed-off-by: Atish Patra Signed-off-by: Atish Patra Signed-off-by: Palmer Dabbelt

RISC-V: Add perf platform driver based on SBI PMU extension

2022-03-21T21:58:33Z

RISC-V SBI specification added a PMU extension that allows to configure start/stop any pmu counter. The RISC-V perf can use most of the generic perf features except interrupt overflow and event filtering based on privilege mode which will be added in future. It also allows to monitor a handful of firmware counters that can provide insights into firmware activity during a performance analysis. Signed-off-by: Atish Patra Signed-off-by: Atish Patra Signed-off-by: Palmer Dabbelt

RISC-V: Add a simple platform driver for RISC-V legacy perf

2022-03-21T21:58:25Z

The old RISC-V perf implementation allowed counting of only cycle/instruction counters using perf. Restore that feature by implementing a simple platform driver under a separate config to provide backward compatibility. Any existing software stack will continue to work as it is. However, it provides an easy way out in future where we can remove the legacy driver. Reviewed-by: Anup Patel Signed-off-by: Atish Patra Signed-off-by: Atish Patra Signed-off-by: Palmer Dabbelt

RISC-V: Add a perf core library for pmu drivers

2022-03-21T21:58:21Z

Implement a perf core library that can support all the essential perf features in future. It can also accommodate any type of PMU implementation in future. Currently, both SBI based perf driver and legacy driver implemented uses the library. Most of the common perf functionalities are kept in this core library wile PMU specific driver can implement PMU specific features. For example, the SBI specific functionality will be implemented in the SBI specific driver. Reviewed-by: Anup Patel Signed-off-by: Atish Patra Signed-off-by: Atish Patra Signed-off-by: Palmer Dabbelt