user/sven/linux.git/drivers/phy/Kconfig, branch v4.9.147

phy: qcom-usb-hs: Add depends on EXTCON

2017-05-14T12:00:19Z

commit 1a09b6a7c10e22c489a8b212dd6862b1fd9674ad upstream. We get the following compile errors if EXTCON is enabled as a module but this driver is builtin: drivers/built-in.o: In function `qcom_usb_hs_phy_power_off': phy-qcom-usb-hs.c:(.text+0x1089): undefined reference to `extcon_unregister_notifier' drivers/built-in.o: In function `qcom_usb_hs_phy_probe': phy-qcom-usb-hs.c:(.text+0x11b5): undefined reference to `extcon_get_edev_by_phandle' drivers/built-in.o: In function `qcom_usb_hs_phy_power_on': phy-qcom-usb-hs.c:(.text+0x128e): undefined reference to `extcon_get_state' phy-qcom-usb-hs.c:(.text+0x12a9): undefined reference to `extcon_register_notifier' so let's mark this as needing to follow the modular status of the extcon framework. Fixes: 9994a33865f4 e2427b09ba929c2b9 (phy: Add support for Qualcomm's USB HS phy") Signed-off-by: Stephen Boyd Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Greg Kroah-Hartman

usb: phy: add USB_SUPPORT dependency

2016-09-10T11:42:58Z

The driver now calls of_usb_get_dr_mode_by_phy, which is part of the USB core layer, and it fails to build when that is not provided: drivers/phy/phy-sun4i-usb.o: In function `sun4i_usb_phy_probe': phy-sun4i-usb.c:(.text.sun4i_usb_phy_probe+0x140): undefined reference to `of_usb_get_dr_mode_by_phy' We already have a couple of other PHY drivers with a dependency on USB_SUPPORT, so that seems to be the easiest fix here. An alternative would be to adjust the #ifdef in include/linux/usb/of.h to also check for CONFIG_USB_SUPPORT. Signed-off-by: Arnd Bergmann Reviewed-by: Hans de Goede Fixes: b33ecca87df9 ("phy-sun4i-usb: Add support for peripheral-only mode") Signed-off-by: Kishon Vijay Abraham I

phy: Add USB Type-C PHY driver for rk3399

2016-09-10T11:19:01Z

Add a PHY provider driver for the rk3399 SoC Type-c PHY. The USB Type-C PHY is designed to support the USB3 and DP applications. The USB3 operates in SuperSpeed mode and the DP can operate at RBR, HBR and HBR2 data rates. This driver create 2 PHY devices separately for USB3 and DisplyPort, and registers them under the child node. Signed-off-by: Chris Zhong Signed-off-by: Kever Yang Reviewed-by: Guenter Roeck Tested-by: Guenter Roeck Signed-off-by: Kishon Vijay Abraham I

phy: rockchip-inno-usb2: add COMMON_CLK dependency

2016-09-10T11:18:41Z

On kernel builds without COMMON_CLK, the newly added rockchip-inno-usb2 driver fails to build: drivers/phy/phy-rockchip-inno-usb2.c:124:16: error: field 'clk480m_hw' has incomplete type struct clk_hw clk480m_hw; In file included from include/linux/clk.h:16:0 from drivers/phy/phy-rockchip-inno-usb2.c:17: include/linux/kernel.h:831:48: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types] const typeof( ((type *)0)->member ) *__mptr = (ptr); \ ... ... Signed-off-by: Frank Wang Signed-off-by: Kishon Vijay Abraham I Reviewed-by: Guenter Roeck Reviewed-by: Heiko Stuebner

phy: add a driver for the Rockchip SoC internal PCIe PHY

2016-09-10T11:18:33Z

This patch to add a generic PHY driver for rockchip PCIe PHY. Access the PHY via registers provided by GRF (general register files) module. Signed-off-by: Shawn Lin Signed-off-by: Kishon Vijay Abraham I

phy: rockchip-inno-usb2: add a new driver for Rockchip usb2phy

2016-09-10T11:18:31Z

The newer SoCs (rk3366, rk3399) take a different usb-phy IP block than rk3288 and before, and most of phy-related registers are also different from the past, so a new phy driver is required necessarily. Signed-off-by: Frank Wang Suggested-by: Heiko Stuebner Suggested-by: Guenter Roeck Suggested-by: Doug Anderson Reviewed-by: Heiko Stuebner Reviewed-by: Guenter Roeck Signed-off-by: Kishon Vijay Abraham I

phy: bcm-ns-usb3: new driver for USB 3.0 PHY on Northstar

2016-09-10T11:18:28Z

Northstar is a family of SoCs used in home routers. They have USB 2.0 and 3.0 controllers with PHYs that need to be properly initialized. This driver provides PHY init support in a generic way and can be bound with XHCI controller driver. There aren't any public datasheets from Broadcom so we can't have nice defines for all used bits. It means we just follow Broadcom's initialization procedure using their magic values. We were quite lucky actually that Broadcom put some comments in their SDK reference code explaining what given writes are responsible for. Signed-off-by: Rafał Miłecki Signed-off-by: Kishon Vijay Abraham I

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

2016-07-27T19:03:20Z

Pull networking updates from David Miller: 1) Unified UDP encapsulation offload methods for drivers, from Alexander Duyck. 2) Make DSA binding more sane, from Andrew Lunn. 3) Support QCA9888 chips in ath10k, from Anilkumar Kolli. 4) Several workqueue usage cleanups, from Bhaktipriya Shridhar. 5) Add XDP (eXpress Data Path), essentially running BPF programs on RX packets as soon as the device sees them, with the option to mirror the packet on TX via the same interface. From Brenden Blanco and others. 6) Allow qdisc/class stats dumps to run lockless, from Eric Dumazet. 7) Add VLAN support to b53 and bcm_sf2, from Florian Fainelli. 8) Simplify netlink conntrack entry layout, from Florian Westphal. 9) Add ipv4 forwarding support to mlxsw spectrum driver, from Ido Schimmel, Yotam Gigi, and Jiri Pirko. 10) Add SKB array infrastructure and convert tun and macvtap over to it. From Michael S Tsirkin and Jason Wang. 11) Support qdisc packet injection in pktgen, from John Fastabend. 12) Add neighbour monitoring framework to TIPC, from Jon Paul Maloy. 13) Add NV congestion control support to TCP, from Lawrence Brakmo. 14) Add GSO support to SCTP, from Marcelo Ricardo Leitner. 15) Allow GRO and RPS to function on macsec devices, from Paolo Abeni. 16) Support MPLS over IPV4, from Simon Horman. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1622 commits) xgene: Fix build warning with ACPI disabled. be2net: perform temperature query in adapter regardless of its interface state l2tp: Correctly return -EBADF from pppol2tp_getname. net/mlx5_core/health: Remove deprecated create_singlethread_workqueue net: ipmr/ip6mr: update lastuse on entry change macsec: ensure rx_sa is set when validation is disabled tipc: dump monitor attributes tipc: add a function to get the bearer name tipc: get monitor threshold for the cluster tipc: make cluster size threshold for monitoring configurable tipc: introduce constants for tipc address validation net: neigh: disallow transition to NUD_STALE if lladdr is unchanged in neigh_update() MAINTAINERS: xgene: Add driver and documentation path Documentation: dtb: xgene: Add MDIO node dtb: xgene: Add MDIO node drivers: net: xgene: ethtool: Use phy_ethtool_gset and sset drivers: net: xgene: Use exported functions drivers: net: xgene: Enable MDIO driver drivers: net: xgene: Add backward compatibility drivers: net: phy: xgene: Add MDIO driver ...

Merge tag 'phy-for-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-testing

2016-07-14T03:03:50Z

Kishon writes: phy: for 4.8 -rc1 *) Add a new phy_ops for setting the phy mode *) Add a new phy driver for DA8xx SoC USB PHY *) Minor fixes and cleanups Signed-off-by: Kishon Vijay Abraham I

phy: da8xx-usb: new driver for DA8xx SoC USB PHY

2016-07-04T12:37:39Z

This is a new phy driver for the SoC USB controllers on the TI DA8xx family of microcontrollers. The USB 1.1 PHY is just a simple on/off. The USB 2.0 PHY also allows overriding the VBUS and ID pins. Signed-off-by: David Lechner Signed-off-by: Kishon Vijay Abraham I