user/sven/linux.git/drivers/phy/broadcom, branch v5.10.36

phy: usb: Fix incorrect clearing of tca_drv_sel bit in SETUP reg for 7211

2020-10-28T16:10:56Z

The 7211a0 has a tca_drv_sel bit in the USB SETUP register that should never be enabled. This feature is only used if there is a USB Type-C PHY, and the 7211 does not have one. If the bit is enabled, the VBUS signal will never be asserted. In the 7211a0, the bit was incorrectly defaulted to on so the driver had to clear the bit. In the 7211c0 the state was inverted so the driver should no longer clear the bit. This hasn't been a problem because all current 7211 boards don't use the VBUS signal, but there are some future customer boards that may use it. Signed-off-by: Al Cooper Acked-by: Florian Fainelli Link: https://lore.kernel.org/r/20201002190115.48017-1-alcooperx@gmail.com Signed-off-by: Vinod Koul

phy: phy-bcm-sr-usb: convert to readl_poll_timeout_atomic()

2020-09-08T04:26:11Z

Use readl_poll_timeout_atomic() to simplify code Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/1598320987-25518-3-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Vinod Koul

phy: phy-bcm-ns2-usbdrd: convert to readl_poll_timeout_atomic()

2020-09-08T04:26:10Z

Use readl_poll_timeout_atomic() to simplify code Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/1598320987-25518-2-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Vinod Koul

phy: phy-bcm-ns-usb3: convert to readl_poll_timeout_atomic()

2020-09-08T04:26:10Z

Use readl_poll_timeout_atomic() to simplify code Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/1598320987-25518-1-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Vinod Koul

phy: bcm63xx-usbh: Add BCM63xx USBH driver

2020-07-21T17:29:58Z

Add BCM63xx USBH PHY driver for BMIPS. Signed-off-by: Álvaro Fernández Rojas Signed-off-by: Simon Arlott Link: https://lore.kernel.org/r/20200720131209.1236590-3-noltari@gmail.com Signed-off-by: Vinod Koul

drivers: phy: sr-usb: do not use internal fsm for USB2 phy init

2020-05-18T14:00:56Z

During different reboot cycles, USB PHY PLL may not always lock during initialization and therefore can cause USB to be not usable. Hence do not use internal FSM programming sequence for the USB PHY initialization. Fixes: 4dcddbb38b64 ("phy: sr-usb: Add Stingray USB PHY driver") Signed-off-by: Bharat Gooty Signed-off-by: Rayagonda Kokatanur Link: https://lore.kernel.org/r/20200513173947.10919-1-rayagonda.kokatanur@broadcom.com Signed-off-by: Kishon Vijay Abraham I

phy: phy-bcm-ns2-usbdrd: Constify phy_ops

2020-05-18T14:00:56Z

phy_ops are never modified and can therefore be made const to allow the compiler to put it in read-only memory. Before: text data bss dec hex filename 7831 3144 128 11103 2b5f drivers/phy/broadcom/phy-bcm-ns2-usbdrd.o After: text data bss dec hex filename 7959 3016 128 11103 2b5f drivers/phy/broadcom/phy-bcm-ns2-usbdrd.o Signed-off-by: Rikard Falkeborn Link: https://lore.kernel.org/r/20200516120441.7627-2-rikard.falkeborn@gmail.com Signed-off-by: Kishon Vijay Abraham I

phy: phy-brcm-usb: Constify static structs

2020-05-18T14:00:56Z

A number of structs were not modified and can therefore be made const to allow the compiler to put them in read-only memory. In order to do so, update a few functions that don't modify there input to take pointers to const. Before: text data bss dec hex filename 15511 6448 64 22023 5607 drivers/phy/broadcom/phy-brcm-usb.o After: text data bss dec hex filename 16058 5936 64 22058 562a drivers/phy/broadcom/phy-brcm-usb.o Signed-off-by: Rikard Falkeborn Link: https://lore.kernel.org/r/20200516120441.7627-4-rikard.falkeborn@gmail.com Signed-off-by: Kishon Vijay Abraham I

phy: sr-usb: Constify phy_ops

2020-05-18T14:00:55Z

phy_ops are never modified and can therefore be made const to allow the compiler to put it in read-only memory. Before: text data bss dec hex filename 4310 1244 0 5554 15b2 drivers/phy/broadcom/phy-bcm-sr-usb.o After: text data bss dec hex filename 4438 1116 0 5554 15b2 drivers/phy/broadcom/phy-bcm-sr-usb.o Signed-off-by: Rikard Falkeborn Link: https://lore.kernel.org/r/20200516120441.7627-3-rikard.falkeborn@gmail.com Signed-off-by: Kishon Vijay Abraham I

phy: brcm-sata: Correct MDIO operations for 40nm platforms

2020-02-21T08:31:47Z

The logic to write to MDIO registers on 40nm platforms was wrong because it would use the port number as an offset from the base address rather than the bank address of the PHY. This is hardly noticeable because the only programming we do is enabling SSC or not, which is not really causing an observable functional change. Correct that mistake by passing down the struct brcm_sata_port structure down to the brcm_sata_mdio_wr() and brcm_sata_mdio_rd() functions and do the proper offsetting for 28nm, respectively 40nm platforms from there. This means that brcm_sata_pcb_base() is now useless and is therefore removed. Fixes: c1602a1a0fbe ("phy: phy_brcmstb_sata: add support for MIPS-based platforms") Signed-off-by: Florian Fainelli Signed-off-by: Kishon Vijay Abraham I