user/sven/linux.git/drivers/phy, branch v4.14.186

phy: qualcomm: Adjust indentation in read_poll_timeout

2020-02-14T21:32:17Z

commit a89806c998ee123bb9c0f18526e55afd12c0c0ab upstream. Clang warns: ../drivers/phy/qualcomm/phy-qcom-apq8064-sata.c:83:4: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] usleep_range(DELAY_INTERVAL_US, DELAY_INTERVAL_US + 50); ^ ../drivers/phy/qualcomm/phy-qcom-apq8064-sata.c:80:3: note: previous statement is here if (readl_relaxed(addr) & mask) ^ 1 warning generated. This warning occurs because there is a space after the tab on this line. Remove it so that the indentation is consistent with the Linux kernel coding style and clang no longer warns. Fixes: 1de990d8a169 ("phy: qcom: Add driver for QCOM APQ8064 SATA PHY") Link: https://github.com/ClangBuiltLinux/linux/issues/816 Signed-off-by: Nathan Chancellor Reviewed-by: Bjorn Andersson Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Greg Kroah-Hartman

phy: cpcap-usb: Prevent USB line glitches from waking up modem

2020-02-05T14:18:05Z

[ Upstream commit 63078b6ba09e842f09df052c5728857389fddcd2 ] The micro-USB connector on Motorola Mapphone devices can be muxed between the SoC and the mdm6600 modem. But even when used for the SoC, configuring the PHY with ID pin grounded will wake up the modem from idle state. Looks like the issue is probably caused by line glitches. We can prevent the glitches by using a previously unknown mode of the GPIO mux to prevent the USB lines from being connected to the moden while configuring the USB PHY, and enable the USB lines after configuring the PHY. Note that this only prevents waking up mdm6600 as regular USB A-host mode, and does not help when connected to a lapdock. The lapdock specific issue still needs to be debugged separately. Cc: Merlijn Wajer Cc: Pavel Machek Cc: Sebastian Reichel Acked-by: Pavel Machek Signed-off-by: Tony Lindgren Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Sasha Levin

phy: cpcap-usb: Fix flakey host idling and enumerating of devices

2020-01-14T19:05:48Z

commit 049226b9fd7442149dcbcf55f15408f5973cceda upstream. We must let the USB host idle things properly before we switch to debug UART mode. Otherwise the USB host may never idle after disconnecting devices, and that causes the next enumeration to be flakey. Cc: Jacopo Mondi Cc: Marcel Partap Cc: Merlijn Wajer Cc: Michael Scott Cc: NeKit Cc: Pavel Machek Cc: Sebastian Reichel Acked-by: Pavel Machek Fixes: 6d6ce40f63af ("phy: cpcap-usb: Add CPCAP PMIC USB support") Signed-off-by: Tony Lindgren Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Greg Kroah-Hartman

phy: cpcap-usb: Fix error path when no host driver is loaded

2020-01-14T19:05:48Z

commit 4acb0200ab2b07843e3ef5599add3454c7440f03 upstream. If musb_mailbox() returns an error, we must still continue to finish configuring the phy. Otherwise the phy state may end up only half initialized, and this can cause the debug serial console to stop working. And this will happen if the usb driver musb controller is not loaded. Let's fix the issue by adding helper for cpcap_usb_try_musb_mailbox(). Fixes: 6d6ce40f63af ("phy: cpcap-usb: Add CPCAP PMIC USB support") Cc: Merlijn Wajer Cc: Pavel Machek Cc: Sebastian Reichel Signed-off-by: Tony Lindgren Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Greg Kroah-Hartman

phy: qcom-usb-hs: Fix extcon double register after power cycle

2019-12-31T11:37:17Z

[ Upstream commit 64f86b9978449ff05bfa6c64b4c5439e21e9c80b ] Commit f0b5c2c96370 ("phy: qcom-usb-hs: Replace the extcon API") switched from extcon_register_notifier() to the resource-managed API, i.e. devm_extcon_register_notifier(). This is problematic in this case, because the extcon notifier is dynamically registered/unregistered whenever the PHY is powered on/off. The resource-managed API does not unregister the notifier until the driver is removed, so as soon as the PHY is power cycled, attempting to register the notifier again results in: double register detected WARNING: CPU: 1 PID: 182 at kernel/notifier.c:26 notifier_chain_register+0x74/0xa0 Call trace: ... extcon_register_notifier+0x74/0xb8 devm_extcon_register_notifier+0x54/0xb8 qcom_usb_hs_phy_power_on+0x1fc/0x208 ... ... and USB stops working after plugging the cable out and in another time. The easiest way to fix this is to make a partial revert of commit f0b5c2c96370 ("phy: qcom-usb-hs: Replace the extcon API") and avoid using the resource-managed API in this case. Fixes: f0b5c2c96370 ("phy: qcom-usb-hs: Replace the extcon API") Signed-off-by: Stephan Gerhold Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Sasha Levin

phy: renesas: rcar-gen3-usb2: Fix sysfs interface of "role"

2019-12-17T19:39:52Z

[ Upstream commit 4bd5ead82d4b877ebe41daf95f28cda53205b039 ] Since the role_store() uses strncmp(), it's possible to refer out-of-memory if the sysfs data size is smaller than strlen("host"). This patch fixes it by using sysfs_streq() instead of strncmp(). Reported-by: Pavel Machek Fixes: 9bb86777fb71 ("phy: rcar-gen3-usb2: add sysfs for usb role swap") Cc: # v4.10+ Signed-off-by: Yoshihiro Shimoda Reviewed-by: Geert Uytterhoeven Acked-by: Pavel Machek Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Sasha Levin

phy: lantiq: Fix compile warning

2019-11-20T17:00:41Z

[ Upstream commit 3a00dae006623d799266d85f28b5f76ef07d6b6c ] This local variable is unused, remove it. Fixes: dea54fbad332 ("phy: Add an USB PHY driver for the Lantiq SoCs using the RCU module") Signed-off-by: Hauke Mehrtens Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Sasha Levin

phy: phy-twl4030-usb: fix denied runtime access

2019-11-20T17:00:33Z

[ Upstream commit 6c7103aa026094a4ee2c2708ec6977a6dfc5331d ] When runtime is not enabled, pm_runtime_get_sync() returns -EACCESS, the counter will be incremented but the resume callback not called, so enumeration and charging will not start properly. To avoid that happen, disable irq on suspend and recheck on resume. Practically this happens when the device is woken up from suspend by plugging in usb. Signed-off-by: Andreas Kemnade Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Sasha Levin

phy: renesas: rcar-gen3-usb2: fix vbus_ctrl for role sysfs

2019-11-20T17:00:33Z

[ Upstream commit 09938ea9d136243e8d1fed6d4d7a257764f28f6d ] This patch fixes and issue that the vbus_ctrl is disabled by rcar_gen3_init_from_a_peri_to_a_host(), so a usb host cannot supply the vbus. Note that this condition will exit when the otg irq happens even if we don't apply this patch. Fixes: 9bb86777fb71 ("phy: rcar-gen3-usb2: add sysfs for usb role swap") Signed-off-by: Yoshihiro Shimoda Reviewed-by: Simon Horman Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Sasha Levin

phy: brcm-sata: allow PHY_BRCM_SATA driver to be built for DSL SoCs

2019-11-20T17:00:32Z

[ Upstream commit 26728df4b254ae06247726a9a6e64823e39ac504 ] Broadcom ARM-based DSL SoCs (BCM63xx product line) have the same Broadcom SATA PHY that other SoCs are using, make it possible to select that driver on these platforms. Signed-off-by: Florian Fainelli Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Sasha Levin