user/sven/linux.git/drivers/phy, branch v4.14.235

phy: marvell: ARMADA375_USBCLUSTER_PHY should not default to y, unconditionally

2021-05-22T08:57:28Z

[ Upstream commit 6cb17707aad869de163d7bf42c253caf501be4e2 ] Merely enabling CONFIG_COMPILE_TEST should not enable additional code. To fix this, restrict the automatic enabling of ARMADA375_USBCLUSTER_PHY to MACH_ARMADA_375, and ask the user in case of compile-testing. Fixes: eee47538ec1f2619 ("phy: add support for USB cluster on the Armada 375 SoC") Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20210208150252.424706-1-geert+renesas@glider.be Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

phy: phy-twl4030-usb: Fix possible use-after-free in twl4030_usb_remove()

2021-05-22T08:57:17Z

[ Upstream commit e1723d8b87b73ab363256e7ca3af3ddb75855680 ] This driver's remove path calls cancel_delayed_work(). However, that function does not wait until the work function finishes. This means that the callback function may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling cancel_delayed_work_sync(), which ensures that the work is properly cancelled, no longer running, and unable to re-schedule itself. Reported-by: Hulk Robot Signed-off-by: Yang Yingliang Link: https://lore.kernel.org/r/20210407092716.3270248-1-yangyingliang@huawei.com Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

phy: cpcap-usb: Fix warning for missing regulator_disable

2021-02-07T13:47:40Z

[ Upstream commit 764257d9069a9c19758b626cc1ba4ae079335d9e ] On deferred probe, we will get the following splat: cpcap-usb-phy cpcap-usb-phy.0: could not initialize VBUS or ID IIO: -517 WARNING: CPU: 0 PID: 21 at drivers/regulator/core.c:2123 regulator_put+0x68/0x78 ... (regulator_put) from [] (release_nodes+0x1b4/0x1fc) (release_nodes) from [] (really_probe+0x104/0x4a0) (really_probe) from [] (driver_probe_device+0x58/0xb4) Signed-off-by: Tony Lindgren Link: https://lore.kernel.org/r/20201230102105.11826-1-tony@atomide.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

phy: tegra: xusb: Fix dangling pointer on probe failure

2020-12-02T07:34:42Z

[ Upstream commit eb9c4dd9bdfdebaa13846c16a8c79b5b336066b6 ] If, for some reason, the xusb PHY fails to probe, it leaves a dangling pointer attached to the platform device structure. This would normally be harmless, but the Tegra XHCI driver then goes and extract that pointer from the PHY device. Things go downhill from there: 8.752082] [004d554e5145533c] address between user and kernel address ranges [ 8.752085] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 8.752088] Modules linked in: max77620_regulator(E+) xhci_tegra(E+) sdhci_tegra(E+) xhci_hcd(E) sdhci_pltfm(E) cqhci(E) fixed(E) usbcore(E) scsi_mod(E) sdhci(E) host1x(E+) [ 8.752103] CPU: 4 PID: 158 Comm: systemd-udevd Tainted: G S W E 5.9.0-rc7-00298-gf6337624c4fe #1980 [ 8.752105] Hardware name: NVIDIA Jetson TX2 Developer Kit (DT) [ 8.752108] pstate: 20000005 (nzCv daif -PAN -UAO BTYPE=--) [ 8.752115] pc : kobject_put+0x1c/0x21c [ 8.752120] lr : put_device+0x20/0x30 [ 8.752121] sp : ffffffc012eb3840 [ 8.752122] x29: ffffffc012eb3840 x28: ffffffc010e82638 [ 8.752125] x27: ffffffc008d56440 x26: 0000000000000000 [ 8.752128] x25: ffffff81eb508200 x24: 0000000000000000 [ 8.752130] x23: ffffff81eb538800 x22: 0000000000000000 [ 8.752132] x21: 00000000fffffdfb x20: ffffff81eb538810 [ 8.752134] x19: 3d4d554e51455300 x18: 0000000000000020 [ 8.752136] x17: ffffffc008d00270 x16: ffffffc008d00c94 [ 8.752138] x15: 0000000000000004 x14: ffffff81ebd4ae90 [ 8.752140] x13: 0000000000000000 x12: ffffff81eb86a4e8 [ 8.752142] x11: ffffff81eb86a480 x10: ffffff81eb862fea [ 8.752144] x9 : ffffffc01055fb28 x8 : ffffff81eb86a4a8 [ 8.752146] x7 : 0000000000000001 x6 : 0000000000000001 [ 8.752148] x5 : ffffff81dff8bc38 x4 : 0000000000000000 [ 8.752150] x3 : 0000000000000001 x2 : 0000000000000001 [ 8.752152] x1 : 0000000000000002 x0 : 3d4d554e51455300 [ 8.752155] Call trace: [ 8.752157] kobject_put+0x1c/0x21c [ 8.752160] put_device+0x20/0x30 [ 8.752164] tegra_xusb_padctl_put+0x24/0x3c [ 8.752170] tegra_xusb_probe+0x8b0/0xd10 [xhci_tegra] [ 8.752174] platform_drv_probe+0x60/0xb4 [ 8.752176] really_probe+0xf0/0x504 [ 8.752179] driver_probe_device+0x100/0x170 [ 8.752181] device_driver_attach+0xcc/0xd4 [ 8.752183] __driver_attach+0xb0/0x17c [ 8.752185] bus_for_each_dev+0x7c/0xd4 [ 8.752187] driver_attach+0x30/0x3c [ 8.752189] bus_add_driver+0x154/0x250 [ 8.752191] driver_register+0x84/0x140 [ 8.752193] __platform_driver_register+0x54/0x60 [ 8.752197] tegra_xusb_init+0x40/0x1000 [xhci_tegra] [ 8.752201] do_one_initcall+0x54/0x2d0 [ 8.752205] do_init_module+0x68/0x29c [ 8.752207] load_module+0x2178/0x26c0 [ 8.752209] __do_sys_finit_module+0xb0/0x120 [ 8.752211] __arm64_sys_finit_module+0x2c/0x40 [ 8.752215] el0_svc_common.constprop.0+0x80/0x240 [ 8.752218] do_el0_svc+0x30/0xa0 [ 8.752220] el0_svc+0x18/0x50 [ 8.752223] el0_sync_handler+0x90/0x318 [ 8.752225] el0_sync+0x158/0x180 [ 8.752230] Code: a9bd7bfd 910003fd a90153f3 aa0003f3 (3940f000) [ 8.752232] ---[ end trace 90f6c89d62d85ff5 ]--- Reset the pointer on probe failure fixes the issue. Fixes: 53d2a715c2403 ("phy: Add Tegra XUSB pad controller support") Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20201013095820.311376-1-maz@kernel.org Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

phy: samsung: s5pv210-usb2: Add delay after reset

2020-10-01T11:12:43Z

[ Upstream commit 05942b8c36c7eb5d3fc5e375d4b0d0c49562e85d ] The USB phy takes some time to reset, so make sure we give it to it. The delay length was taken from the 4x12 phy driver. This manifested in issues with the DWC2 driver since commit fe369e1826b3 ("usb: dwc2: Make dwc2_readl/writel functions endianness-agnostic.") where the endianness check would read the DWC ID as 0 due to the phy still resetting, resulting in the wrong endian mode being chosen. Signed-off-by: Jonathan Bakker Link: https://lore.kernel.org/r/BN6PR04MB06605D52502816E500683553A3D10@BN6PR04MB0660.namprd04.prod.outlook.com Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Sasha Levin

phy: qcom-qmp: Use correct values for ipq8074 PCIe Gen2 PHY init

2020-10-01T11:12:23Z

[ Upstream commit afd55e6d1bd35b4b36847869011447a83a81c8e0 ] There were some problem in ipq8074 Gen2 PCIe phy init sequence. 1. Few register values were wrongly updated in the phy init sequence. 2. The register QSERDES_RX_SIGDET_CNTRL is a RX tuning parameter register which is added in serdes table causing the wrong register was getting updated. 3. Clocks and resets were not added in the phy init. Fix these to make Gen2 PCIe port on ipq8074 devices to work. Fixes: eef243d04b2b6 ("phy: qcom-qmp: Add support for IPQ8074") Cc: stable@vger.kernel.org Co-developed-by: Selvam Sathappan Periakaruppan Signed-off-by: Selvam Sathappan Periakaruppan Signed-off-by: Sivaprakash Murugesan Link: https://lore.kernel.org/r/1596036607-11877-4-git-send-email-sivaprak@codeaurora.org Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

phy: sun4i-usb: fix dereference of pointer phy0 before it is null checked

2020-07-22T07:22:24Z

[ Upstream commit 38b1927e5bf9bcad4a2e33189ef1c5569f9599ba ] Currently pointer phy0 is being dereferenced via the assignment of phy on the call to phy_get_drvdata before phy0 is null checked, this can lead to a null pointer dereference. Fix this by performing the null check on phy0 before the call to phy_get_drvdata. Also replace the phy0 == NULL check with the more usual !phy0 idiom. Addresses-Coverity: ("Dereference before null check") Fixes: e6f32efb1b12 ("phy: sun4i-usb: Make sure to disable PHY0 passby for peripheral mode") Signed-off-by: Colin Ian King Link: https://lore.kernel.org/r/20200625124428.83564-1-colin.king@canonical.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

phy: qualcomm: Adjust indentation in read_poll_timeout

2020-02-14T21:32:17Z

commit a89806c998ee123bb9c0f18526e55afd12c0c0ab upstream. Clang warns: ../drivers/phy/qualcomm/phy-qcom-apq8064-sata.c:83:4: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] usleep_range(DELAY_INTERVAL_US, DELAY_INTERVAL_US + 50); ^ ../drivers/phy/qualcomm/phy-qcom-apq8064-sata.c:80:3: note: previous statement is here if (readl_relaxed(addr) & mask) ^ 1 warning generated. This warning occurs because there is a space after the tab on this line. Remove it so that the indentation is consistent with the Linux kernel coding style and clang no longer warns. Fixes: 1de990d8a169 ("phy: qcom: Add driver for QCOM APQ8064 SATA PHY") Link: https://github.com/ClangBuiltLinux/linux/issues/816 Signed-off-by: Nathan Chancellor Reviewed-by: Bjorn Andersson Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Greg Kroah-Hartman

phy: cpcap-usb: Prevent USB line glitches from waking up modem

2020-02-05T14:18:05Z

[ Upstream commit 63078b6ba09e842f09df052c5728857389fddcd2 ] The micro-USB connector on Motorola Mapphone devices can be muxed between the SoC and the mdm6600 modem. But even when used for the SoC, configuring the PHY with ID pin grounded will wake up the modem from idle state. Looks like the issue is probably caused by line glitches. We can prevent the glitches by using a previously unknown mode of the GPIO mux to prevent the USB lines from being connected to the moden while configuring the USB PHY, and enable the USB lines after configuring the PHY. Note that this only prevents waking up mdm6600 as regular USB A-host mode, and does not help when connected to a lapdock. The lapdock specific issue still needs to be debugged separately. Cc: Merlijn Wajer Cc: Pavel Machek Cc: Sebastian Reichel Acked-by: Pavel Machek Signed-off-by: Tony Lindgren Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Sasha Levin

phy: cpcap-usb: Fix flakey host idling and enumerating of devices

2020-01-14T19:05:48Z

commit 049226b9fd7442149dcbcf55f15408f5973cceda upstream. We must let the USB host idle things properly before we switch to debug UART mode. Otherwise the USB host may never idle after disconnecting devices, and that causes the next enumeration to be flakey. Cc: Jacopo Mondi Cc: Marcel Partap Cc: Merlijn Wajer Cc: Michael Scott Cc: NeKit Cc: Pavel Machek Cc: Sebastian Reichel Acked-by: Pavel Machek Fixes: 6d6ce40f63af ("phy: cpcap-usb: Add CPCAP PMIC USB support") Signed-off-by: Tony Lindgren Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Greg Kroah-Hartman