user/sven/linux.git/drivers/phy, branch v4.19.135

phy: sun4i-usb: fix dereference of pointer phy0 before it is null checked

2020-07-22T07:32:05Z

[ Upstream commit 38b1927e5bf9bcad4a2e33189ef1c5569f9599ba ] Currently pointer phy0 is being dereferenced via the assignment of phy on the call to phy_get_drvdata before phy0 is null checked, this can lead to a null pointer dereference. Fix this by performing the null check on phy0 before the call to phy_get_drvdata. Also replace the phy0 == NULL check with the more usual !phy0 idiom. Addresses-Coverity: ("Dereference before null check") Fixes: e6f32efb1b12 ("phy: sun4i-usb: Make sure to disable PHY0 passby for peripheral mode") Signed-off-by: Colin Ian King Link: https://lore.kernel.org/r/20200625124428.83564-1-colin.king@canonical.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

phy: mapphone-mdm6600: Fix write timeouts with shorter GPIO toggle interval

2020-03-11T13:15:10Z

commit 46b7edf1c7b7c91004c4db2c355cbd033f2385f9 upstream. I've noticed that when writing data to the modem the writes can time out at some point eventually. Looks like kicking the modem idle GPIO every 600 ms instead of once a second fixes the issue. Note that this rate is different from our runtime PM autosuspend rate MDM6600_MODEM_IDLE_DELAY_MS that we still want to keep at 1 second, so let's add a separate define for PHY_MDM6600_IDLE_KICK_MS. Fixes: f7f50b2a7b05 ("phy: mapphone-mdm6600: Add runtime PM support for n_gsm on USB suspend") Cc: Marcel Partap Cc: Merlijn Wajer Cc: Michael Scott Cc: NeKit Cc: Pavel Machek Cc: Sebastian Reichel Signed-off-by: Tony Lindgren Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Greg Kroah-Hartman

phy: mapphone-mdm6600: Fix timeouts by adding wake-up handling

2020-03-11T13:15:10Z

commit be4e3c737eebd75815633f4b8fd766defaf0f1fc upstream. We have an interrupt handler for the wake-up GPIO pin, but we're missing the code to wake-up the system. This can cause timeouts receiving data for the UART that shares the wake-up GPIO pin with the USB PHY. All we need to do is just wake the system and kick the autosuspend timeout to fix the issue. Fixes: 5d1ebbda0318 ("phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4") Cc: Marcel Partap Cc: Merlijn Wajer Cc: Michael Scott Cc: NeKit Cc: Pavel Machek Cc: Sebastian Reichel Signed-off-by: Tony Lindgren Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Greg Kroah-Hartman

phy: qualcomm: Adjust indentation in read_poll_timeout

2020-02-11T12:34:12Z

commit a89806c998ee123bb9c0f18526e55afd12c0c0ab upstream. Clang warns: ../drivers/phy/qualcomm/phy-qcom-apq8064-sata.c:83:4: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] usleep_range(DELAY_INTERVAL_US, DELAY_INTERVAL_US + 50); ^ ../drivers/phy/qualcomm/phy-qcom-apq8064-sata.c:80:3: note: previous statement is here if (readl_relaxed(addr) & mask) ^ 1 warning generated. This warning occurs because there is a space after the tab on this line. Remove it so that the indentation is consistent with the Linux kernel coding style and clang no longer warns. Fixes: 1de990d8a169 ("phy: qcom: Add driver for QCOM APQ8064 SATA PHY") Link: https://github.com/ClangBuiltLinux/linux/issues/816 Signed-off-by: Nathan Chancellor Reviewed-by: Bjorn Andersson Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Greg Kroah-Hartman

phy: cpcap-usb: Prevent USB line glitches from waking up modem

2020-02-01T09:37:07Z

[ Upstream commit 63078b6ba09e842f09df052c5728857389fddcd2 ] The micro-USB connector on Motorola Mapphone devices can be muxed between the SoC and the mdm6600 modem. But even when used for the SoC, configuring the PHY with ID pin grounded will wake up the modem from idle state. Looks like the issue is probably caused by line glitches. We can prevent the glitches by using a previously unknown mode of the GPIO mux to prevent the USB lines from being connected to the moden while configuring the USB PHY, and enable the USB lines after configuring the PHY. Note that this only prevents waking up mdm6600 as regular USB A-host mode, and does not help when connected to a lapdock. The lapdock specific issue still needs to be debugged separately. Cc: Merlijn Wajer Cc: Pavel Machek Cc: Sebastian Reichel Acked-by: Pavel Machek Signed-off-by: Tony Lindgren Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Sasha Levin

phy: qcom-qmp: Increase PHY ready timeout

2020-02-01T09:37:07Z

[ Upstream commit cd217ee6867d285ceecd610fa1006975d5c683fa ] It's typical for the QHP PHY to take slightly above 1ms to initialize, so increase the timeout of the PHY ready check to 10ms - as already done in the downstream PCIe driver. Signed-off-by: Bjorn Andersson Tested-by: Evan Green Tested-by: Vinod Koul Signed-off-by: Vinod Koul Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Sasha Levin

phy: usb: phy-brcm-usb: Remove sysfs attributes upon driver removal

2020-01-27T13:50:54Z

[ Upstream commit d9e100829fca6cbd270d7e005b0c0bb2d14924b8 ] We are not destroying the sysfs attribute groupe we registered during the probe function which will make subsequent probe calls to that driver fail. Correct that with adding a remove function which only removes those attributes since the reference counting on clocks did its job already. Fixes: 415060b21f31 ("phy: usb: phy-brcm-usb: Add ability to force DRD mode to host or device") Signed-off-by: Florian Fainelli Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Sasha Levin

phy: qcom-qusb2: fix missing assignment of ret when calling clk_prepare_enable

2020-01-27T13:50:52Z

[ Upstream commit d98010817a26eba8d4d1e8a639e0b7d7f042308a ] The error return from the call to clk_prepare_enable is not being assigned to variable ret even though ret is being used to check if the call failed. Fix this by adding in the missing assignment. Addresses-Coverity: ("Logically dead code") Fixes: 891a96f65ac3 ("phy: qcom-qusb2: Add support for runtime PM") Signed-off-by: Colin Ian King Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Sasha Levin

phy: cpcap-usb: Fix flakey host idling and enumerating of devices

2020-01-14T19:07:08Z

commit 049226b9fd7442149dcbcf55f15408f5973cceda upstream. We must let the USB host idle things properly before we switch to debug UART mode. Otherwise the USB host may never idle after disconnecting devices, and that causes the next enumeration to be flakey. Cc: Jacopo Mondi Cc: Marcel Partap Cc: Merlijn Wajer Cc: Michael Scott Cc: NeKit Cc: Pavel Machek Cc: Sebastian Reichel Acked-by: Pavel Machek Fixes: 6d6ce40f63af ("phy: cpcap-usb: Add CPCAP PMIC USB support") Signed-off-by: Tony Lindgren Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Greg Kroah-Hartman

phy: cpcap-usb: Fix error path when no host driver is loaded

2020-01-14T19:07:08Z

commit 4acb0200ab2b07843e3ef5599add3454c7440f03 upstream. If musb_mailbox() returns an error, we must still continue to finish configuring the phy. Otherwise the phy state may end up only half initialized, and this can cause the debug serial console to stop working. And this will happen if the usb driver musb controller is not loaded. Let's fix the issue by adding helper for cpcap_usb_try_musb_mailbox(). Fixes: 6d6ce40f63af ("phy: cpcap-usb: Add CPCAP PMIC USB support") Cc: Merlijn Wajer Cc: Pavel Machek Cc: Sebastian Reichel Signed-off-by: Tony Lindgren Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Greg Kroah-Hartman