user/sven/linux.git/drivers/phy, branch v5.9.8

phy: marvell: comphy: Convert internal SMCC firmware return codes to errno

2020-11-01T11:47:10Z

commit ea17a0f153af2cd890e4ce517130dcccaa428c13 upstream. Driver ->power_on and ->power_off callbacks leaks internal SMCC firmware return codes to phy caller. This patch converts SMCC error codes to standard linux errno codes. Include file linux/arm-smccc.h already provides defines for SMCC error codes, so use them instead of custom driver defines. Note that return value is signed 32bit, but stored in unsigned long type with zero padding. Tested-by: Tomasz Maciej Nowak Link: https://lore.kernel.org/r/20200902144344.16684-2-pali@kernel.org Signed-off-by: Pali Rohár Signed-off-by: Lorenzo Pieralisi Reviewed-by: Rob Herring Signed-off-by: Greg Kroah-Hartman

Merge tag 'phy-fixes-2-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into usb-linus

2020-09-29T15:21:54Z

Vinod writes: phy: Second round of fixes for 5.9 *) Fix of leak in TI phy driver * tag 'phy-fixes-2-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: phy: ti: am654: Fix a leak in serdes_am654_probe()

phy: ti: am654: Fix a leak in serdes_am654_probe()

2020-09-08T10:53:09Z

If devm_phy_create() fails then we need to call of_clk_del_provider(node) to undo the call to of_clk_add_provider(). Fixes: 71e2f5c5c224 ("phy: ti: Add a new SERDES driver for TI's AM654x SoC") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/20200905124648.GA183976@mwanda Signed-off-by: Vinod Koul

Merge tag 'phy-fixes-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-linus

2020-09-04T10:41:55Z

Vinod writes: phy: fixes for 5.9 *) platform_no_drv_owner.cocci and return value check qcom ipq806x-usb driver *) correcting register programming for ipq8074 phy *) disable PHY charger detect for omap-usb2-phy * tag 'phy-fixes-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: phy: omap-usb2-phy: disable PHY charger detect phy: qcom-qmp: Use correct values for ipq8074 PCIe Gen2 PHY init phy: qualcomm: fix return value check in qcom_ipq806x_usb_phy_probe() phy: qualcomm: fix platform_no_drv_owner.cocci warnings

phy: omap-usb2-phy: disable PHY charger detect

2020-08-31T09:00:59Z

AM654x PG1.0 has a silicon bug that D+ is pulled high after POR, which could cause enumeration failure with some USB hubs. Disabling the USB2_PHY Charger Detect function will put D+ into the normal state. This addresses Silicon Errata: i2075 - "USB2PHY: USB2PHY Charger Detect is Enabled by Default Without VBUS Presence" Signed-off-by: Roger Quadros Tested-by: Jan Kiszka Link: https://lore.kernel.org/r/20200824075127.14902-2-rogerq@ti.com Signed-off-by: Vinod Koul

treewide: Use fallthrough pseudo-keyword

2020-08-23T22:36:59Z

Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva

phy: qcom-qmp: Use correct values for ipq8074 PCIe Gen2 PHY init

2020-08-23T15:50:14Z

There were some problem in ipq8074 Gen2 PCIe phy init sequence. 1. Few register values were wrongly updated in the phy init sequence. 2. The register QSERDES_RX_SIGDET_CNTRL is a RX tuning parameter register which is added in serdes table causing the wrong register was getting updated. 3. Clocks and resets were not added in the phy init. Fix these to make Gen2 PCIe port on ipq8074 devices to work. Fixes: eef243d04b2b6 ("phy: qcom-qmp: Add support for IPQ8074") Cc: stable@vger.kernel.org Co-developed-by: Selvam Sathappan Periakaruppan Signed-off-by: Selvam Sathappan Periakaruppan Signed-off-by: Sivaprakash Murugesan Link: https://lore.kernel.org/r/1596036607-11877-4-git-send-email-sivaprak@codeaurora.org Signed-off-by: Vinod Koul

phy: qualcomm: fix return value check in qcom_ipq806x_usb_phy_probe()

2020-08-17T04:07:12Z

In case of error, the function devm_ioremap() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: ef19b117b834 ("phy: qualcomm: add qcom ipq806x dwc usb phy driver") Reported-by: Hulk Robot Signed-off-by: Wei Yongjun Link: https://lore.kernel.org/r/20200723113622.136752-1-weiyongjun1@huawei.com Signed-off-by: Vinod Koul

phy: qualcomm: fix platform_no_drv_owner.cocci warnings

2020-08-17T04:07:11Z

Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by: YueHaibing Link: https://lore.kernel.org/r/20200725031624.31432-1-yuehaibing@huawei.com Signed-off-by: Vinod Koul

Merge tag 'phy-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next

2020-07-23T07:52:10Z

Vinod writes: phy for 5.9 - New PHY Drivers: - Samsung UFS - Qcom USB DWC for ipq806x - Xilinx ZynqMP Gigabit Transceiver - Qcom USB QMP for IPQ8074 - BCM63xx USBH - Removed: - Qcom ufs qmp phy driver - Updates: - Support for Qcom SM8250 QMP V4 USB3 UNIPHY - qcom-snps runtime pm support - Cleanup of W=1 warns in the subsystem * tag 'phy-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (46 commits) phy: qualcomm: fix setting of tx_deamp_3_5db when device property read fails phy: bcm63xx-usbh: Add BCM63xx USBH driver dt-bindings: phy: add bcm63xx-usbh bindings phy: armada-38x: fix NETA lockup when repeatedly switching speeds dt: update Marvell Armada 38x COMPHY binding phy: samsung-ufs: Fix IS_ERR argument dt-bindings: phy: renesas,usb3-phy: Add r8a774e1 support dt-bindings: phy: renesas,usb2-phy: Add r8a774e1 support phy: renesas: rcar-gen3-usb2: exit if request_irq() failed phy: renesas: rcar-gen3-usb2: move irq registration to init devicetree: bindings: phy: Document ipq806x dwc3 qcom phy phy: qualcomm: add qcom ipq806x dwc usb phy driver phy: samsung-ufs: add UFS PHY driver for samsung SoC dt-bindings: phy: Document Samsung UFS PHY bindings phy: sun4i-usb: explicitly include gpio/consumer.h phy: stm32: use NULL instead of zero phy: exynos5-usbdrd: use correct format for structure description phy: rockchip-typec: use correct format for structure description phy: xgene: remove unsigned integer comparison with less than zero phy: mapphone-mdm6600: Add missing description for some structure fields ...