user/sven/linux.git/drivers/phy, branch v6.15.1

phy: Fix error handling in tegra_xusb_port_init

2025-05-14T11:28:43Z

If device_add() fails, do not use device_unregister() for error handling. device_unregister() consists two functions: device_del() and put_device(). device_unregister() should only be called after device_add() succeeded because device_del() undoes what device_add() does if successful. Change device_unregister() to put_device() call before returning from the function. As comment of device_add() says, 'if device_add() succeeds, you should call device_del() when you want to get rid of it. If device_add() has not succeeded, use only put_device() to drop the reference count'. Found by code review. Cc: stable@vger.kernel.org Fixes: 53d2a715c240 ("phy: Add Tegra XUSB pad controller support") Signed-off-by: Ma Ke Acked-by: Thierry Reding Link: https://lore.kernel.org/r/20250303072739.3874987-1-make24@iscas.ac.cn Signed-off-by: Vinod Koul

phy: renesas: rcar-gen3-usb2: Set timing registers only once

2025-05-14T11:25:09Z

phy-rcar-gen3-usb2 driver exports 4 PHYs. The timing registers are common to all PHYs. There is no need to set them every time a PHY is initialized. Set timing register only when the 1st PHY is initialized. Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver") Cc: stable@vger.kernel.org Reviewed-by: Yoshihiro Shimoda Tested-by: Yoshihiro Shimoda Reviewed-by: Lad Prabhakar Signed-off-by: Claudiu Beznea Link: https://lore.kernel.org/r/20250507125032.565017-6-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul

phy: renesas: rcar-gen3-usb2: Assert PLL reset on PHY power off

2025-05-14T11:25:09Z

Assert PLL reset on PHY power off. This saves power. Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver") Cc: stable@vger.kernel.org Reviewed-by: Yoshihiro Shimoda Tested-by: Yoshihiro Shimoda Reviewed-by: Lad Prabhakar Signed-off-by: Claudiu Beznea Link: https://lore.kernel.org/r/20250507125032.565017-5-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul

phy: renesas: rcar-gen3-usb2: Lock around hardware registers and driver data

2025-05-14T11:25:09Z

The phy-rcar-gen3-usb2 driver exposes four individual PHYs that are requested and configured by PHY users. The struct phy_ops APIs access the same set of registers to configure all PHYs. Additionally, PHY settings can be modified through sysfs or an IRQ handler. While some struct phy_ops APIs are protected by a driver-wide mutex, others rely on individual PHY-specific mutexes. This approach can lead to various issues, including: 1/ the IRQ handler may interrupt PHY settings in progress, racing with hardware configuration protected by a mutex lock 2/ due to msleep(20) in rcar_gen3_init_otg(), while a configuration thread suspends to wait for the delay, another thread may try to configure another PHY (with phy_init() + phy_power_on()); re-running the phy_init() goes to the exact same configuration code, re-running the same hardware configuration on the same set of registers (and bits) which might impact the result of the msleep for the 1st configuring thread 3/ sysfs can configure the hardware (though role_store()) and it can still race with the phy_init()/phy_power_on() APIs calling into the drivers struct phy_ops To address these issues, add a spinlock to protect hardware register access and driver private data structures (e.g., calls to rcar_gen3_is_any_rphy_initialized()). Checking driver-specific data remains necessary as all PHY instances share common settings. With this change, the existing mutex protection is removed and the cleanup.h helpers are used. While at it, to keep the code simpler, do not skip regulator_enable()/regulator_disable() APIs in rcar_gen3_phy_usb2_power_on()/rcar_gen3_phy_usb2_power_off() as the regulators enable/disable operations are reference counted anyway. Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver") Cc: stable@vger.kernel.org Reviewed-by: Yoshihiro Shimoda Tested-by: Yoshihiro Shimoda Reviewed-by: Lad Prabhakar Signed-off-by: Claudiu Beznea Link: https://lore.kernel.org/r/20250507125032.565017-4-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul

phy: renesas: rcar-gen3-usb2: Move IRQ request in probe

2025-05-14T11:25:09Z

Commit 08b0ad375ca6 ("phy: renesas: rcar-gen3-usb2: move IRQ registration to init") moved the IRQ request operation from probe to struct phy_ops::phy_init API to avoid triggering interrupts (which lead to register accesses) while the PHY clocks (enabled through runtime PM APIs) are not active. If this happens, it results in a synchronous abort. One way to reproduce this issue is by enabling CONFIG_DEBUG_SHIRQ, which calls free_irq() on driver removal. Move the IRQ request and free operations back to probe, and take the runtime PM state into account in IRQ handler. This commit is preparatory for the subsequent fixes in this series. Reviewed-by: Yoshihiro Shimoda Tested-by: Yoshihiro Shimoda Reviewed-by: Lad Prabhakar Signed-off-by: Claudiu Beznea Link: https://lore.kernel.org/r/20250507125032.565017-3-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul

phy: renesas: rcar-gen3-usb2: Fix role detection on unbind/bind

2025-05-14T11:25:09Z

It has been observed on the Renesas RZ/G3S SoC that unbinding and binding the PHY driver leads to role autodetection failures. This issue occurs when PHY 3 is the first initialized PHY. PHY 3 does not have an interrupt associated with the USB2_INT_ENABLE register (as rcar_gen3_int_enable[3] = 0). As a result, rcar_gen3_init_otg() is called to initialize OTG without enabling PHY interrupts. To resolve this, add rcar_gen3_is_any_otg_rphy_initialized() and call it in role_store(), role_show(), and rcar_gen3_init_otg(). At the same time, rcar_gen3_init_otg() is only called when initialization for a PHY with interrupt bits is in progress. As a result, the struct rcar_gen3_phy::otg_initialized is no longer needed. Fixes: 549b6b55b005 ("phy: renesas: rcar-gen3-usb2: enable/disable independent irqs") Cc: stable@vger.kernel.org Reviewed-by: Yoshihiro Shimoda Tested-by: Yoshihiro Shimoda Reviewed-by: Lad Prabhakar Signed-off-by: Claudiu Beznea Link: https://lore.kernel.org/r/20250507125032.565017-2-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul

phy: tegra: xusb: remove a stray unlock

2025-05-14T11:21:18Z

We used to take a lock in tegra186_utmi_bias_pad_power_on() but now we have moved the lock into the caller. Unfortunately, when we moved the lock this unlock was left behind and it results in a double unlock. Delete it now. Fixes: b47158fb4295 ("phy: tegra: xusb: Use a bitmask for UTMI pad power state tracking") Signed-off-by: Dan Carpenter Reviewed-by: Jon Hunter Link: https://lore.kernel.org/r/aAjmR6To4EnvRl4G@stanley.mountain Signed-off-by: Vinod Koul

phy: phy-rockchip-samsung-hdptx: Fix PHY PLL output 50.25MHz error

2025-05-14T08:55:09Z

When using HDMI PLL frequency division coefficient at 50.25MHz that is calculated by rk_hdptx_phy_clk_pll_calc(), it fails to get PHY LANE lock. Although the calculated values are within the allowable range of PHY PLL configuration. In order to fix the PHY LANE lock error and provide the expected 50.25MHz output, manually compute the required PHY PLL frequency division coefficient and add it to ropll_tmds_cfg configuration table. Signed-off-by: Algea Cao Reviewed-by: Cristian Ciocaltea Acked-by: Heiko Stuebner Link: https://lore.kernel.org/r/20250427095124.3354439-1-algea.cao@rock-chips.com Signed-off-by: Vinod Koul

phy: starfive: jh7110-usb: Fix USB 2.0 host occasional detection failure

2025-05-14T08:45:12Z

JH7110 USB 2.0 host fails to detect USB 2.0 devices occasionally. With a long time of debugging and testing, we found that setting Rx clock gating control signal to normal power consumption mode can solve this problem. Signed-off-by: Hal Feng Link: https://lore.kernel.org/r/20250422101244.51686-1-hal.feng@starfivetech.com Signed-off-by: Vinod Koul

phy: rockchip-samsung-dcphy: Add missing assignment

2025-04-11T11:46:22Z

The "ret = " was accidentally dropped so the error handling doesn't work. Fixes: b2a1a2ae7818 ("phy: rockchip: Add Samsung MIPI D-/C-PHY driver") Signed-off-by: Dan Carpenter Reviewed-by: Heiko Stuebner Link: https://lore.kernel.org/r/e64265a4-9543-4728-a49f-ea910fccef7c@stanley.mountain Signed-off-by: Vinod Koul