user/sven/linux.git/drivers/pinctrl/aspeed, branch v5.19.3

pinctrl: aspeed: Fix potential NULL dereference in aspeed_pinmux_set_mux()

2022-06-15T13:19:57Z

pdesc could be null but still dereference pdesc->name and it will lead to a null pointer access. So we move a null check before dereference. Signed-off-by: Haowen Bai Link: https://lore.kernel.org/r/1650508019-22554-1-git-send-email-baihaowen@meizu.com Signed-off-by: Linus Walleij

pinctrl: pinctrl-aspeed-g6: add FWQSPI function-group

2022-04-13T02:23:52Z

Add FWSPIDQ2 (AE12) and FWSPIDQ3 (AF12) function-group to support AST2600 FW SPI quad mode. These pins can be used with dedicated FW SPI pins - FWSPICS0# (AB14), FWSPICK (AF13), FWSPIMOSI (AC14) and FWSPIMISO (AB13). Signed-off-by: Johnny Huang Signed-off-by: Jae Hyun Yoo Reviewed-by: Andrew Jeffery Link: https://lore.kernel.org/r/20220329173932.2588289-5-quic_jaehyoo@quicinc.com Signed-off-by: Joel Stanley

pinctrl: pinctrl-aspeed-g6: remove FWQSPID group in pinctrl

2022-04-13T02:23:52Z

FWSPIDQ2 and FWSPIDQ3 are not part of FWSPI18 interface so remove FWQSPID group in pinctrl. These pins must be used with the FWSPI pins that are dedicated for boot SPI interface which provides same 3.3v logic level. Fixes: 2eda1cdec49f ("pinctrl: aspeed: Add AST2600 pinmux support") Signed-off-by: Jae Hyun Yoo Reviewed-by: Andrew Jeffery Link: https://lore.kernel.org/r/20220329173932.2588289-3-quic_jaehyoo@quicinc.com Signed-off-by: Joel Stanley

pinctrl: aspeed: fix unmet dependencies on MFD_SYSCON for PINCTRL_ASPEED

2021-12-16T03:28:49Z

When PINCTRL_ASPEED_G* is selected, and MFD_SYSCON is not selected, Kbuild gives the following warnings: WARNING: unmet direct dependencies detected for PINCTRL_ASPEED Depends on [n]: PINCTRL [=y] && (ARCH_ASPEED [=n] || COMPILE_TEST [=y]) && OF [=y] && MFD_SYSCON [=n] Selected by [y]: - PINCTRL_ASPEED_G4 [=y] && PINCTRL [=y] && (MACH_ASPEED_G4 [=n] || COMPILE_TEST [=y]) && OF [=y] WARNING: unmet direct dependencies detected for PINCTRL_ASPEED Depends on [n]: PINCTRL [=y] && (ARCH_ASPEED [=n] || COMPILE_TEST [=y]) && OF [=y] && MFD_S> Selected by [y]: - PINCTRL_ASPEED_G5 [=y] && PINCTRL [=y] && (MACH_ASPEED_G5 [=n] || COMPILE_TEST [=y]) && O> WARNING: unmet direct dependencies detected for PINCTRL_ASPEED Depends on [n]: PINCTRL [=y] && (ARCH_ASPEED [=n] || COMPILE_TEST [=y]) && OF [=y] && MFD_S> Selected by [y]: - PINCTRL_ASPEED_G6 [=y] && PINCTRL [=y] && (MACH_ASPEED_G6 [=n] || COMPILE_TEST [=y]) && O> This is because MACH_ASPEED_G* depend on (ARCH_ASPEED || COMPILE_TEST). ARCH_ASPEED enables the MFD_SYSCON dependency, but COMPILE_TEST doesn't. These unmet dependency bugs were detected by Kismet, a static analysis tool for Kconfig. Please advise if this is not the appropriate solution. Signed-off-by: Julian Braha Reviewed-by: Andrew Jeffery Link: https://lore.kernel.org/r/20211215214022.146391-1-julianbraha@gmail.com Signed-off-by: Linus Walleij

Merge tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

2021-09-03T22:33:47Z

Pull Kbuild updates from Masahiro Yamada: - Add -s option (strict mode) to merge_config.sh to make it fail when any symbol is redefined. - Show a warning if a different compiler is used for building external modules. - Infer --target from ARCH for CC=clang to let you cross-compile the kernel without CROSS_COMPILE. - Make the integrated assembler default (LLVM_IAS=1) for CC=clang. - Add to the kernel source instead of borrowing from the compiler. - Add Nick Desaulniers as a Kbuild reviewer. - Drop stale cc-option tests. - Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG to handle symbols in inline assembly. - Show a warning if 'FORCE' is missing for if_changed rules. - Various cleanups * tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits) kbuild: redo fake deps at include/ksym/*.h kbuild: clean up objtool_args slightly modpost: get the *.mod file path more simply checkkconfigsymbols.py: Fix the '--ignore' option kbuild: merge vmlinux_link() between ARCH=um and other architectures kbuild: do not remove 'linux' link in scripts/link-vmlinux.sh kbuild: merge vmlinux_link() between the ordinary link and Clang LTO kbuild: remove stale *.symversions kbuild: remove unused quiet_cmd_update_lto_symversions gen_compile_commands: extract compiler command from a series of commands x86: remove cc-option-yn test for -mtune= arc: replace cc-option-yn uses with cc-option s390: replace cc-option-yn uses with cc-option ia64: move core-y in arch/ia64/Makefile to arch/ia64/Kbuild sparc: move the install rule to arch/sparc/Makefile security: remove unneeded subdir-$(CONFIG_...) kbuild: sh: remove unused install script kbuild: Fix 'no symbols' warning when CONFIG_TRIM_UNUSD_KSYMS=y kbuild: Switch to 'f' variants of integrated assembler flag kbuild: Shuffle blank line to improve comment meaning ...

isystem: trim/fixup stdarg.h and other headers

2021-08-19T00:02:55Z

Delete/fixup few includes in anticipation of global -isystem compile option removal. Note: crypto/aegis128-neon-inner.c keeps due to redefinition of uintptr_t error (one definition comes from , another from ). Signed-off-by: Alexey Dobriyan Signed-off-by: Masahiro Yamada

pinctrl: aspeed: placate kernel-doc warnings

2021-08-10T13:29:44Z

Eliminate kernel-doc warnings in drivers/pinctrl/aspeed by using proper kernel-doc notation. Fixes these kernel-doc warnings: drivers/pinctrl/aspeed/pinmux-aspeed.c:61: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Query the enabled or disabled state for a mux function's signal on a pin drivers/pinctrl/aspeed/pinctrl-aspeed.c:135: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Search for the signal expression needed to enable the pin's signal for the Signed-off-by: Randy Dunlap Reported-by: kernel test robot Cc: Aditya Srivastava Cc: Andrew Jeffery Cc: linux-aspeed@lists.ozlabs.org Cc: openbmc@lists.ozlabs.org Cc: Linus Walleij Cc: linux-gpio@vger.kernel.org Acked-by: Andrew Jeffery Link: https://lore.kernel.org/r/20210723034840.8752-1-rdunlap@infradead.org Signed-off-by: Linus Walleij

Merge tag 'pinctrl-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2021-07-01T23:57:14Z

Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v5.14 kernel. Not so much going on. No core changes, just drivers. The most interesting would be that MIPS Ralink is migrating to pin control and we have some bindings but not yet code for the Apple M1 pin controller. New drivers: - Last merge window we created a driver for the Ralink RT2880. We are now moving the Ralink SoC pin control drivers out of the MIPS architecture code and into the pin control subsystem. This concerns RT288X, MT7620, RT305X, RT3883 and MT7621. - Qualcomm SM6125 SoC pin control driver. - Qualcomm spmi-gpio support for PM7325. - Qualcomm spmi-mpp also handles PMI8994 (just a compatible string) - Mediatek MT8365 SoC pin controller. - New device HID for the AMD GPIO controller. Improvements: - Pin bias config support for a slew of Renesas pin controllers. - Incremental improvements and non-urgent bug fixes to the Renesas SoC drivers. - Implement irq_set_wake on the AMD pin controller so we can wake up from external pin events. Misc: - Devicetree bindings for the Apple M1 pin controller, we will probably see a proper driver for this soon as well" * tag 'pinctrl-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (54 commits) pinctrl: ralink: rt305x: add missing include pinctrl: stm32: check for IRQ MUX validity during alloc() pinctrl: zynqmp: some code cleanups drivers: qcom: pinctrl: Add pinctrl driver for sm6125 dt-bindings: pinctrl: qcom: sm6125: Document SM6125 pinctrl driver dt-bindings: pinctrl: mcp23s08: add documentation for reset-gpios pinctrl: mcp23s08: Add optional reset GPIO pinctrl: mediatek: fix mode encoding pinctrl: mcp23s08: Fix missing unlock on error in mcp23s08_irq() pinctrl: bcm: Constify static pinmux_ops pinctrl: bcm: Constify static pinctrl_ops pinctrl: ralink: move RT288X SoC pinmux config into a new 'pinctrl-rt288x.c' file pinctrl: ralink: move MT7620 SoC pinmux config into a new 'pinctrl-mt7620.c' file pinctrl: ralink: move RT305X SoC pinmux config into a new 'pinctrl-rt305x.c' file pinctrl: ralink: move RT3883 SoC pinmux config into a new 'pinctrl-rt3883.c' file pinctrl: ralink: move MT7621 SoC pinmux config into a new 'pinctrl-mt7621.c' file pinctrl: ralink: move ralink architecture pinmux header into the driver pinctrl: single: config: enable the pin's input pinctrl: mtk: Fix mt8365 Kconfig dependency pinctrl: mcp23s08: fix race condition in irq handler ...

pinctrl: pinctrl-aspeed-g6: Add sgpio pinctrl settings

2021-05-27T23:47:53Z

AST2600 supports 2 SGPIO master interfaces and 2 SGPIO slave interfaces. Current pinctrl driver only define the first sgpio master and slave interfaces. The second SGPIO master and slave interfaces should be added in pinctrl driver as well. Signed-off-by: Steven Lee Reviewed-by: Andrew Jeffery Link: https://lore.kernel.org/r/20210525055308.31069-4-steven_lee@aspeedtech.com Signed-off-by: Linus Walleij

pinctrl: aspeed: Fix minor documentation error

2021-05-19T00:11:18Z

Kernel test robot throws below warning -> drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c:2705: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c:2614: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/pinctrl/aspeed/pinctrl-aspeed.c:111: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/pinctrl/aspeed/pinmux-aspeed.c:24: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Fix minor documentation error. Reported-by: kernel test robot Signed-off-by: Souptick Joarder Cc: Randy Dunlap Reviewed-by: Randy Dunlap Acked-by: Andrew Jeffery Link: https://lore.kernel.org/r/1619353584-8196-1-git-send-email-jrdr.linux@gmail.com Signed-off-by: Linus Walleij