user/sven/linux.git/drivers/platform/chrome, branch v4.14.105

platform/chrome: don't report EC_MKBP_EVENT_SENSOR_FIFO as wakeup

2019-02-12T18:45:58Z

[ Upstream commit 6ad16b78a039b45294b1ad5d69c14ac57b2fe706 ] EC_MKBP_EVENT_SENSOR_FIFO events can be triggered for a variety of reasons, and there are very few cases in which they should be treated as wakeup interrupts (particularly, when a certain MOTIONSENSE_MODULE_FLAG_* is set, but this is not even supported in the mainline cros_ec_sensor driver yet). Most of the time, they are benign sensor readings. In any case, the top-level cros_ec device doesn't know enough to determine that they should wake the system, and so it should not report the event. This would be the job of the cros_ec_sensors driver to parse. This patch adds checks to cros_ec_get_next_event() such that it doesn't signal 'wakeup' for events of type EC_MKBP_EVENT_SENSOR_FIFO. This patch is particularly relevant on devices like Scarlet (Rockchip RK3399 tablet, known as Acer Chromebook Tab 10), where the EC firmware reports sensor events much more frequently. This was causing /sys/power/wakeup_count to increase very frequently, often needlessly interrupting our ability to suspend the system. Signed-off-by: Brian Norris Signed-off-by: Benson Leung Signed-off-by: Sasha Levin

platform/chrome: cros_ec_lpc: remove redundant pointer request

2018-06-05T09:41:57Z

commit d3b56c566d4ba8cae688baf3cca94425d57ea783 upstream. Pointer request is being assigned but never used, so remove it. Cleans up the clang warning: drivers/platform/chrome/cros_ec_lpc.c:68:2: warning: Value stored to 'request' is never read Signed-off-by: Colin Ian King Signed-off-by: Benson Leung Cc: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

platform/chrome: Use proper protocol transfer function

2018-03-24T10:01:23Z

[ Upstream commit d48b8c58c57f6edbe2965f0a5f62c5cf9593ca96 ] pkt_xfer should be used for protocol v3, and cmd_xfer otherwise. We had one instance of these functions correct, but not the second, fall-back case. We use the fall-back only when the first command returns an IN_PROGRESS status, which is only used on some EC firmwares where we don't want to constantly poll the bus, but instead back off and sleep/retry for a little while. Fixes: 2c7589af3c4d ("mfd: cros_ec: add proto v3 skeleton") Signed-off-by: Shawn Nematbakhsh Signed-off-by: Brian Norris Reviewed-by: Javier Martinez Canillas Signed-off-by: Benson Leung Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

cros_ec: fix nul-termination for firmware build info

2018-03-24T10:01:23Z

[ Upstream commit 50a0d71a5d20e1d3eff1d974fdc8559ad6d74892 ] As gcc-8 reports, we zero out the wrong byte: drivers/platform/chrome/cros_ec_sysfs.c: In function 'show_ec_version': drivers/platform/chrome/cros_ec_sysfs.c:190:12: error: array subscript 4294967295 is above array bounds of 'uint8_t[]' [-Werror=array-bounds] This changes the code back to what it did before changing to a zero-length array structure. Fixes: a841178445bb ("mfd: cros_ec: Use a zero-length array for command data") Signed-off-by: Arnd Bergmann Signed-off-by: Benson Leung Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

dmi: Mark all struct dmi_system_id instances const

2017-09-14T09:59:30Z

... and __initconst if applicable. Based on similar work for an older kernel in the Grsecurity patch. [JD: fix toshiba-wmi build] [JD: add htcpen] [JD: move __initconst where checkscript wants it] Signed-off-by: Christoph Hellwig Signed-off-by: Jean Delvare

platform/chrome: cros_ec_lightbar - hide unused PM functions

2017-06-27T16:27:43Z

The only reference to the new functions is inside of an #ifdef, which now causes a harmless warning when CONFIG_PM_SLEEP is not set: chrome/cros_ec_dev.c:478:12: error: 'ec_device_resume' defined but not used [-Werror=unused-function] chrome/cros_ec_dev.c:469:12: error: 'ec_device_suspend' defined but not used [-Werror=unused-function] This marks the two functions as __maybe_unused so they can get silently dropped by the compiler. Fixes: 405c84308c43 ("platform/chrome: cros_ec_lightbar - Control of suspend/resume lightbar sequence") Signed-off-by: Arnd Bergmann Reviewed-by: Guenter Roeck Signed-off-by: Benson Leung

cros_ec: Don't signal wake event for non-wake host events

2017-06-27T16:19:15Z

The subset of wake-enabled host events is defined by the EC, but the EC may still send non-wake host events if we're in the process of suspending. Get the mask of wake-enabled host events from the EC and filter out non-wake events to prevent spurious aborted suspend attempts. Signed-off-by: Shawn Nematbakhsh Signed-off-by: Thierry Escande Acked-for-MFD-by: Lee Jones Signed-off-by: Benson Leung

cros_ec: Fix deadlock when EC is not responsive at probe

2017-06-27T15:22:39Z

When the EC is not responsive at probe, we try to get basic information (protocol to use) later on through cros_xfer_cmd() call. This patch makes sure there is no deadlock when re-probing the EC by replacing call to cros_xfer_cmd() with send_command() in the function cros_ec_get_host_command_version_mask(). Also, this patch adds the function header indicating it must be called protected. Signed-off-by: Gwendal Grignou Signed-off-by: Thierry Escande Signed-off-by: Benson Leung

cros_ec: Don't return error when checking command version

2017-06-27T15:22:28Z

With this patch, cros_ec_query_all() does not return an error if it fails to check for MKBP events support. Instead, the EC device structure indicates that it does not support MKBP events (mkbp_event_supported field) and cros_ec_query_all() returns 0. Signed-off-by: Thierry Escande Signed-off-by: Benson Leung