user/sven/linux.git/drivers/platform, branch v4.14.15

platform/x86: wmi: Call acpi_wmi_init() later

2018-01-17T08:45:18Z

commit 98b8e4e5c17bf87c1b18ed929472051dab39878c upstream. Calling acpi_wmi_init() at the subsys_initcall() level causes ordering issues to appear on some systems and they are difficult to reproduce, because there is no guaranteed ordering between subsys_initcall() calls, so they may occur in different orders on different systems. In particular, commit 86d9f48534e8 (mm/slab: fix kmemcg cache creation delayed issue) exposed one of these issues where genl_init() and acpi_wmi_init() are both called at the same initcall level, but the former must run before the latter so as to avoid a NULL pointer dereference. For this reason, move the acpi_wmi_init() invocation to the initcall_sync level which should still be early enough for things to work correctly in the WMI land. Link: https://marc.info/?t=151274596700002&r=1&w=2 Reported-by: Jonathan McDowell Reported-by: Joonsoo Kim Tested-by: Jonathan McDowell Signed-off-by: Rafael J. Wysocki Signed-off-by: Darren Hart (VMware) Signed-off-by: Greg Kroah-Hartman

platform/x86: asus-wireless: send an EV_SYN/SYN_REPORT between state changes

2017-12-25T13:26:31Z

commit bff5bf9db1c9453ffd0a78abed3e2d040c092fd9 upstream. Sending the switch state change twice within the same frame is invalid evdev protocol and only works if the client handles keys immediately as well. Processing events immediately is incorrect, it forces a fake order of events that does not exist on the device. Recent versions of libinput changed to only process the device state and SYN_REPORT time, so now the key event is lost. https://bugs.freedesktop.org/show_bug.cgi?id=104041 Signed-off-by: Peter Hutterer Signed-off-by: Darren Hart (VMware) Signed-off-by: Greg Kroah-Hartman

platform/x86: hp_accel: Add quirk for HP ProBook 440 G4

2017-12-20T09:10:31Z

[ Upstream commit 163ca80013aafb6dc9cb295de3db7aeab9ab43f8 ] Added support for HP ProBook 440 G4 laptops by including the accelerometer orientation quirk for that device. Testing was performed based on the axis orientation guidelines here: https://www.kernel.org/doc/Documentation/misc-devices/lis3lv02d which states "If the left side is elevated, X increases (becomes positive)". When tested, on lifting the left edge, x values became increasingly negative thus indicating an inverted x-axis on the installed lis3lv02d chip. This was compensated by adding an entry for this device in hp_accel.c specifying the quirk as x_inverted. The patch was tested on a ProBook 440 G4 device and x-axis as well as y and z-axis values are now generated as per spec. Signed-off-by: Osama Khan Signed-off-by: Andy Shevchenko Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

platform/x86: intel_punit_ipc: Fix resource ioremap warning

2017-12-20T09:10:25Z

[ Upstream commit 6cc8cbbc8868033f279b63e98b26b75eaa0006ab ] For PUNIT device, ISPDRIVER_IPC and GTDDRIVER_IPC resources are not mandatory. So when PMC IPC driver creates a PUNIT device, if these resources are not available then it creates dummy resource entries for these missing resources. But during PUNIT device probe, doing ioremap on these dummy resources generates following warning messages. intel_punit_ipc: can't request region for resource [mem 0x00000000] intel_punit_ipc: can't request region for resource [mem 0x00000000] intel_punit_ipc: can't request region for resource [mem 0x00000000] intel_punit_ipc: can't request region for resource [mem 0x00000000] This patch fixes this issue by adding extra check for resource size before performing ioremap operation. Signed-off-by: Kuppuswamy Sathyanarayanan Signed-off-by: Andy Shevchenko Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

platform/x86: hp-wmi: Fix tablet mode detection for convertibles

2017-12-05T10:26:27Z

commit 9968e12a291e639dd51d1218b694d440b22a917f upstream. Commit f9cf3b2880cc ("platform/x86: hp-wmi: Refactor dock and tablet state fetchers") consolidated the methods for docking and laptop mode detection, but omitted to apply the correct mask for the laptop mode (it always uses the constant for docking). Fixes: f9cf3b2880cc ("platform/x86: hp-wmi: Refactor dock and tablet state fetchers") Signed-off-by: Stefan Brüns Cc: Michel Dänzer Signed-off-by: Andy Shevchenko Signed-off-by: Greg Kroah-Hartman

platform/x86: peaq_wmi: Fix missing terminating entry for peaq_dmi_table

2017-11-21T08:49:23Z

commit d6fa71f1c003fb2bc824276bb424a4171f9a717f upstream. Add missing terminating entry to peaq_dmi_table. Fixes: 3b95206110a2 ("platform/x86: peaq-wmi: Add DMI check before ...") Reported-by: Fengguang Wu Signed-off-by: Hans de Goede Signed-off-by: Andy Shevchenko Signed-off-by: Greg Kroah-Hartman

platform/x86: peaq-wmi: Add DMI check before binding to the WMI interface

2017-11-21T08:49:23Z

commit 3b95206110a2c13076c3a7fa8ddeae36c2dbcf42 upstream. It seems that the WMI GUID used by the PEAQ 2-in-1 WMI hotkeys is not as unique as a GUID should be and is used on some other devices too. This is causing spurious key-press reports on these other devices. This commits adds a DMI check to the PEAQ 2-in-1 WMI hotkeys driver to ensure that it is actually running on a PEAQ 2-in-1, fixing the spurious key-presses on these other devices. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1497861 BugLink: https://bugzilla.suse.com/attachment.cgi?id=743182 Signed-off-by: Hans de Goede Signed-off-by: Andy Shevchenko Signed-off-by: Greg Kroah-Hartman

Merge tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2017-11-02T17:04:46Z

Pull initial SPDX identifiers from Greg KH: "License cleanup: add SPDX license identifiers to some files Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman " * tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: License cleanup: add SPDX license identifier to uapi header files with a license License cleanup: add SPDX license identifier to uapi header files with no license License cleanup: add SPDX GPL-2.0 license identifier to files with no license

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

platform/x86: intel_pmc_ipc: Use spin_lock to protect GCR updates

2017-10-23T17:16:36Z

Currently, update_no_reboot_bit() function implemented in this driver uses mutex_lock() to protect its register updates. But this function is called with in atomic context in iTCO_wdt_start() and iTCO_wdt_stop() functions in iTCO_wdt.c driver, which in turn causes "sleeping into atomic context" issue. This patch fixes this issue by replacing the mutex_lock() with spin_lock() to protect the GCR read/write/update APIs. Fixes: 9d855d4 ("platform/x86: intel_pmc_ipc: Fix iTCO_wdt GCS memory mapping failure") Signed-off-by: Kuppuswamy Sathyanarayanan Signed-off-by: Andy Shevchenko