user/sven/linux.git/drivers/platform, branch v4.4.271

platform/x86: hp_accel: Avoid invoking _INI to speed up resume

2021-06-03T06:22:07Z

[ Upstream commit 79d341e26ebcdbc622348aaaab6f8f89b6fdb25f ] hp_accel can take almost two seconds to resume on some HP laptops. The bottleneck is on evaluating _INI, which is only needed to run once. Resolve the issue by only invoking _INI when it's necessary. Namely, on probe and on hibernation restore. Signed-off-by: Kai-Heng Feng Acked-by: Éric Piel Link: https://lore.kernel.org/r/20210430060736.590321-1-kai.heng.feng@canonical.com Signed-off-by: Hans de Goede Signed-off-by: Sasha Levin

platform/x86: thinkpad_acpi: Correct thermal sensor allocation

2021-05-22T08:38:16Z

commit 6759e18e5cd8745a5dfc5726e4a3db5281ec1639 upstream. On recent Thinkpad platforms it was reported that temp sensor 11 was always incorrectly displaying 66C. It turns out the reason for this is that this location in EC RAM is not a temperature sensor but is the power supply ID (offset 0xC2). Based on feedback from the Lenovo firmware team the EC RAM version can be determined and for the current version (3) only the 0x78 to 0x7F range is used for temp sensors. I don't have any details for earlier versions so I have left the implementation unaltered there. Note - in this block only 0x78 and 0x79 are officially designated (CPU & GPU sensors). The use of the other locations in the block will vary from platform to platform; but the existing logic to detect a sensor presence holds. Signed-off-by: Mark Pearson Link: https://lore.kernel.org/r/20210407212015.298222-1-markpearson@lenovo.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman

platform/chrome: cros_ec_dev - Fix security issue

2021-03-24T09:57:00Z

commit 5d749d0bbe811c10d9048cde6dfebc761713abfd upstream. Prevent memory scribble by checking that ioctl buffer size parameters are sane. Without this check, on 32 bits system, if .insize = 0xffffffff - 20 and .outsize the amount to scribble, we would overflow, allocate a small amounts and be able to write outside of the malloc'ed area. Adding a hard limit allows argument checking of the ioctl. With the current EC, it is expected .insize and .outsize to be at around 512 bytes or less. Signed-off-by: Gwendal Grignou Signed-off-by: Olof Johansson Signed-off-by: Greg Kroah-Hartman

platform/x86: acer-wmi: Add new force_caps module parameter

2021-03-11T12:46:36Z

[ Upstream commit 39aa009bb66f9d5fbd1e58ca4aa03d6e6f2c9915 ] Add a new force_caps module parameter to allow overriding the drivers builtin capability detection mechanism. This can be used to for example: -Disable rfkill functionality on devices where there is an AA OEM DMI record advertising non functional rfkill switches -Force loading of the driver on devices with a missing AA OEM DMI record Note that force_caps is -1 when unset, this allows forcing the capability field to 0, which results in acer-wmi only providing WMI hotkey handling while disabling all other (led, rfkill, backlight) functionality. Reviewed-by: Andy Shevchenko Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20201019185628.264473-4-hdegoede@redhat.com Signed-off-by: Sasha Levin

platform/x86: acer-wmi: add automatic keyboard background light toggle key as KEY_LIGHTS_TOGGLE

2020-12-29T12:42:31Z

[ Upstream commit 9e7a005ad56aa7d6ea5830c5ffcc60bf35de380b ] Got a dmesg message on my AMD Renoir based Acer laptop: "acer_wmi: Unknown key number - 0x84" when toggling keyboard background light Signed-off-by: Timo Witte Reviewed-by: "Lee, Chun-Yi" Link: https://lore.kernel.org/r/20200804001423.36778-1-timo.witte@gmail.com Signed-off-by: Hans de Goede Signed-off-by: Sasha Levin

platform/x86: thinkpad_acpi: re-initialize ACPI buffer size when reuse

2020-10-14T07:46:22Z

commit 720ef73d1a239e33c3ad8fac356b9b1348e68aaf upstream. Evaluating ACPI _BCL could fail, then ACPI buffer size will be set to 0. When reuse this ACPI buffer, AE_BUFFER_OVERFLOW will be triggered. Re-initialize buffer size will make ACPI evaluate successfully. Fixes: 46445b6b896fd ("thinkpad-acpi: fix handle locate for video and query of _BCL") Signed-off-by: Aaron Ma Signed-off-by: Andy Shevchenko Signed-off-by: Greg Kroah-Hartman

platform/x86: thinkpad_acpi: initialize tp_nvram_state variable

2020-10-14T07:46:22Z

commit 5f38b06db8af3ed6c2fc1b427504ca56fae2eacc upstream. clang static analysis flags this represenative problem thinkpad_acpi.c:2523:7: warning: Branch condition evaluates to a garbage value if (!oldn->mute || ^~~~~~~~~~~ In hotkey_kthread() mute is conditionally set by hotkey_read_nvram() but unconditionally checked by hotkey_compare_and_issue_event(). So the tp_nvram_state variable s[2] needs to be initialized. Fixes: 01e88f25985d ("ACPI: thinkpad-acpi: add CMOS NVRAM polling for hot keys (v9)") Signed-off-by: Tom Rix Reviewed-by: Hans de Goede Acked-by: mark gross Signed-off-by: Andy Shevchenko Signed-off-by: Greg Kroah-Hartman

platform/x86: acer-wmi: setup accelerometer when ACPI device was found

2020-06-11T07:21:37Z

commit f9ac89f5ad613b462339e845aeb8494646fd9be2 upstream. The 98d610c3739a patch was introduced since v4.11-rc1 that it causes that the accelerometer input device will not be created on workable machines because the HID string comparing logic is wrong. And, the patch doesn't prevent that the accelerometer input device be created on the machines that have no BST0001. That's because the acpi_get_devices() returns success even it didn't find any match device. This patch fixed the HID string comparing logic of BST0001 device. And, it also makes sure that the acpi_get_devices() returns acpi_handle for BST0001. Fixes: 98d610c3739a ("acer-wmi: setup accelerometer when machine has appropriate notify event") Reference: https://bugzilla.kernel.org/show_bug.cgi?id=193761 Reported-by: Samuel Sieb Signed-off-by: "Lee, Chun-Yi" Signed-off-by: Andy Shevchenko Cc: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

platform/x86: alienware-wmi: fix kfree on potentially uninitialized pointer

2020-05-27T14:40:28Z

commit 98e2630284ab741804bd0713e932e725466f2f84 upstream. Currently the kfree of output.pointer can be potentially freeing an uninitalized pointer in the case where out_data is NULL. Fix this by reworking the case where out_data is not-null to perform the ACPI status check and also the kfree of outpoint.pointer in one block and hence ensuring the pointer is only freed when it has been used. Also replace the if (ptr != NULL) idiom with just if (ptr). Fixes: ff0e9f26288d ("platform/x86: alienware-wmi: Correct a memory leak") Signed-off-by: Colin Ian King Signed-off-by: Darren Hart (VMware) Signed-off-by: Greg Kroah-Hartman

platform/x86: asus-nb-wmi: Do not load on Asus T100TA and T200TA

2020-05-27T14:40:24Z

[ Upstream commit 3bd12da7f50b8bc191fcb3bab1f55c582234df59 ] asus-nb-wmi does not add any extra functionality on these Asus Transformer books. They have detachable keyboards, so the hotkeys are send through a HID device (and handled by the hid-asus driver) and also the rfkill functionality is not used on these devices. Besides not adding any extra functionality, initializing the WMI interface on these devices actually has a negative side-effect. For some reason the \_SB.ATKD.INIT() function which asus_wmi_platform_init() calls drives GPO2 (INT33FC:02) pin 8, which is connected to the front facing webcam LED, high and there is no (WMI or other) interface to drive this low again causing the LED to be permanently on, even during suspend. This commit adds a blacklist of DMI system_ids on which not to load the asus-nb-wmi and adds these Transformer books to this list. This fixes the webcam LED being permanently on under Linux. Signed-off-by: Hans de Goede Signed-off-by: Andy Shevchenko Signed-off-by: Sasha Levin