user/sven/linux.git/drivers/reset, branch v4.4

reset: ath79: Fix missing spin_lock_init

2015-09-01T12:48:40Z

Signed-off-by: Axel Lin Acked-by: Alban Bedel Signed-off-by: Philipp Zabel

Merge branch 'reset/ath79' into reset/next

2015-08-16T15:11:20Z

reset: reset-zynq: Adding support for Xilinx Zynq reset controller.

2015-08-04T15:07:46Z

This adds a reset controller driver to control the Xilinx Zynq AP-SoC's various resets. Signed-off-by: Moritz Fischer Reviewed-by: Michal Simek Acked-by: Sören Brinkmann Signed-off-by: Philipp Zabel

reset: Add a driver for the reset controller on the AR71XX/AR9XXX

2015-08-04T08:41:30Z

The AR71XX/AR9XXX SoC have a simple reset controller with one bit per reset line. Signed-off-by: Alban Bedel Acked-by: Ralf Baechle Signed-off-by: Philipp Zabel

reset: socfpga: Update reset-socfpga to read the altr,modrst-offset property

2015-08-03T11:13:59Z

In order for the Arria10 to be able to re-use the reset driver for SoCFPGA Cyclone5/Arria5, we need to read the 'altr,modrst-offset' property from the device tree entry. The 'altr,modrst-offset' property is the first register into the reset manager that is used for bringing peripherals out of reset. The driver assumes a modrst-offset of 0x10 in order to support legacy Cyclone5/Arria5 hardware. Signed-off-by: Dinh Nguyen

reset: add driver for lpc18xx rgu

2015-08-03T11:13:51Z

Add reset driver for the Reset Generation Unit (RGU) found on NXP LPC18xx and LPC43xx devies. This reset controller features up to 64 reset lines connected to different blocks and peripheral in the SoC. Most reset lines on the controller are self clearing except for those dealing with the Cortex-M0 cores on LPC43xx devices. This driver also registers a restart handler that can be used to reset the entire device. Signed-off-by: Joachim Eastwood Signed-off-by: Philipp Zabel

reset: sti: constify of_device_id array

2015-08-03T11:13:50Z

of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick Acked-by: Maxime Coquelin Acked-by: Patrice Chotard Signed-off-by: Philipp Zabel

ARM: STi: DT: Move reset controller constants into common location

2015-08-03T11:13:44Z

By popular vote, the DT binding includes for reset controllers are located in include/dt-bindings/reset/. Move the STi reset constants in there, too, to avoid confusion. Signed-off-by: Philipp Zabel Acked-by: Patrice Chotard

reset: berlin: drop arch_initcall initialization

2015-05-18T15:52:42Z

With proper platform driver probing for berlin reset driver, drop the arch_initcall workaround. Signed-off-by: Antoine Tenart Acked-by: Philipp Zabel Signed-off-by: Sebastian Hesselbarth

reset: berlin: convert to a platform driver

2015-05-18T15:52:36Z

The Berlin reset controller was introduced without being a platform driver because of a needed DT rework: the node describing the reset controller also describes the pinctrl and clk controllers... Prepare conversion by adding a platform driver probe to a new compatible "marvell,berlin2-reset" with syscon regmap. Signed-off-by: Antoine Tenart Acked-by: Philipp Zabel Signed-off-by: Sebastian Hesselbarth