user/sven/linux.git/drivers/rtc/Makefile, branch v5.4.3

rtc: fsl-ftm-alarm: add FTM alarm driver

2019-08-23T14:20:50Z

For the platforms including LS1012A, LS1021A, LS1028A, LS1043A, LS1046A, LS1088A, LS208xA that has the FlexTimer module, implementing alarm functions within RTC subsystem to wakeup the system when system going to sleep (work with RCPM driver). Signed-off-by: Biwen Li Link: https://lore.kernel.org/r/20190813030157.48590-1-biwen.li@nxp.com Signed-off-by: Alexandre Belloni

rtc: Add Amlogic Virtual Wake RTC

2019-08-22T21:08:32Z

The Amlogic Meson GX SoCs uses a special register to store the time in seconds to wakeup after a system suspend. In order to be able to reuse the RTC wakealarm feature, this driver implements a fake RTC device which uses the system time to deduce a suspend delay. Signed-off-by: Neil Armstrong [khilman: rebase to v5.3-rc, rework and modernization] Signed-off-by: Kevin Hilman Link: https://lore.kernel.org/r/20190812232850.8016-3-khilman@kernel.org Signed-off-by: Alexandre Belloni

rtc: remove w90x900/nuc900 driver

2019-08-12T20:56:07Z

The ARM w90x900 platform is getting removed, so this driver is obsolete. Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20190809202749.742267-15-arnd@arndb.de Signed-off-by: Alexandre Belloni

rtc: bd70528: Initial support for ROHM bd70528 RTC

2019-06-27T09:57:24Z

Support RTC block in ROHM bd70528 power management IC. Support getting and setting the time and date as well as arming an alarm which can also be used to wake the PMIC from standby state. HW supports wake interrupt only for the next 24 hours (sec, minute and hour information only) so we limit also the alarm interrupt to this 24 hours for the sake of consistency. Signed-off-by: Matti Vaittinen Acked-by: Alexandre Belloni Signed-off-by: Lee Jones

rtc: Add ASPEED RTC driver

2019-04-04T08:07:10Z

Read and writes the time to the non-battery backed RTC in the ASPEED BMC system on chip families. Signed-off-by: Joel Stanley Signed-off-by: Alexandre Belloni

Merge tag 'tag-chrome-platform-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux

2019-03-12T16:46:32Z

Pull chrome platform updates from Benson Leung: - SPDX identifier cleanup for platform/chrome - Cleanup series between mfd and chrome/platform, moving cros-ec attributes from mfd/cros_ec_dev to sub-drivers in platform/chrome - Wilco EC driver - Maintainership change to new group repository * tag 'tag-chrome-platform-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome: fix wilco-ec dependencies platform/chrome: wilco_ec: Add RTC driver platform/chrome: wilco_ec: Add support for raw commands in debugfs platform/chrome: Add new driver for Wilco EC platform/chrome: cros_ec: Remove cros_ec dependency in lpc_mec MAINTAINERS: chrome-platform: change the git tree to a chrome-platform group git tree platform/chrome: cros_ec_sysfs: remove pr_fmt() define platform/chrome: cros_ec_lightbar: remove pr_fmt() define platform/chrome: cros_kbd_led_backlight: switch to SPDX identifier platform/chrome: cros_ec_spi: switch to SPDX identifier platform/chrome: cros_ec_proto: switch to SPDX identifier platform/chrome: cros_ec_lpc: switch to SPDX identifier platform/chrome: cros_ec_i2c: switch to SPDX identifier platform/chrome: cros_ec_vbc: switch to SPDX identifier platform/chrome: cros_ec_sysfs: switch to SPDX identifier platform/chrome: cros_ec_lightbar: switch to SPDX identifier platform/chrome: cros_ec_debugfs: switch to SPDX identifier platform/chrome: cromeos_pstore: switch to SPDX identifier

platform/chrome: wilco_ec: Add RTC driver

2019-02-21T20:36:53Z

This Embedded Controller has an internal RTC that is exposed as a standard RTC class driver with read/write functionality. The driver is added to the drivers/rtc/ so that the maintainer of that directory will be able to comment on this change, as that maintainer is the expert on this system. In addition, the driver code is called indirectly after a corresponding device is registered from core.c, as opposed to core.c registering the driver callbacks directly. To test: > hwclock --show --rtc /dev/rtc1 2007-12-31 16:01:20.460959-08:00 > hwclock --systohc --rtc /dev/rtc1 > hwclock --show --rtc /dev/rtc1 2018-11-29 17:08:00.780793-08:00 > hwclock --show --rtc /dev/rtc1 2007-12-31 16:01:20.460959-08:00 > hwclock --systohc --rtc /dev/rtc1 > hwclock --show --rtc /dev/rtc1 2018-11-29 17:08:00.780793-08:00 Signed-off-by: Duncan Laurie Signed-off-by: Nick Crews Acked-by: Alexandre Belloni [Fix the sparse warning: symbol 'wilco_ec_rtc_read/write' was not declared] Signed-off-by: Wei Yongjun Signed-off-by: Enric Balletbo i Serra

rtc: add AB-RTCMC-32.768kHz-EOZ9 RTC support

2019-02-18T21:39:30Z

This patch adds support for AB-RTCMC-32.768kHz-EOZ9 RTC/Calendar module with I2C interface. Signed-off-by: Artem Panfilov Signed-off-by: Alexandre Belloni

rtc: rv3028: add new driver

2019-02-17T20:29:10Z

Add a driver for the MicroCrystal RV-3028. It is a SMT Real-Time Clock Module that incorporates an integrated CMOS circuit together with an XTAL. It has an i2c interface. The driver handles date/time, alarms, trickle charging, timestamping, frequency offset correction, EEPROM and NVRAM. Signed-off-by: Alexandre Belloni

rtc: support for the Amlogic Meson RTC

2019-02-11T08:41:21Z

Add support for the RTC block on the 32-bit Amlogic Meson6, Meson8, Meson8b and Meson8m2 SoCs. The RTC is split in to two parts, which are both managed by this driver: - the AHB front end - and a simple serial connection to the actual registers The RTC_COUNTER register which holds the time is 32-bits wide. There are four 32-bit wide (in total: 16 bytes) "regmem" registers which are exposed using nvmem. On Amlogic's 3.10 kernel this is used to store data which needs to survive a suspend / resume cycle. Signed-off-by: Ben Dooks [resurrected Ben's patches after 2 years] Signed-off-by: Martin Blumenstingl Signed-off-by: Alexandre Belloni