user/sven/linux.git/drivers/rtc/rtc-sh.c, branch v5.4.90

Merge tag 'rtc-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

2019-05-09T21:46:33Z

Pull RTC updates from Alexandre Belloni: "A huge series from me this cycle. I went through many drivers to set the date and time range supported by the RTC which helps solving HW limitation when the time comes (as early as next year for some). This time, I focused on drivers using .set_mms and .set_mmss64, allowing me to remove those callbacks. About a third of the patches got reviews, I actually own the RTCs and I tested another third and the remaining one are unlikely to cause any issues. Other than that, a single new driver and the usual fixes here and there. Summary: Subsystem: - set_mmss and set_mmss64 rtc_ops removal - Fix timestamp value for RTC_TIMESTAMP_BEGIN_1900 - Use SPDX identifier for the core - validate upper bound of tm->tm_year New driver: - Aspeed BMC SoC RTC Drivers: - abx80x: use rtc_add_group - ds3232: nvram support - pcf85063: add alarm, nvram, offset correction and microcrystal rv8263 support - x1205: add of_match_table - Use set_time instead of set_mms/set_mmss64 for: ab3100, coh901331, digicolor, ds1672, ds2404, ep93xx, imxdi, jz4740, lpc32xx, mc13xxx, mxc, pcap, stmp3xxx, test, wm831x, xgene. - Set RTC range for: ab3100, at91sam9, coh901331, da9063, digicolor, dm355evm, ds1672, ds2404, ep39xx, goldfish, imxdi, jz4740, lpc32xx, mc13xxx, mv, mxc, omap, pcap, pcf85063, pcf85363, ps3, sh, stmp3xxx, sun4v, tegra, wm831x, xgene. - Switch to rtc_time64_to_tm/rtc_tm_to_time64 for the driver that properly set the RTC range. - Use dev_get_drvdata instead of multiple indirections" * tag 'rtc-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (177 commits) rtc: snvs: Use __maybe_unused instead of #if CONFIG_PM_SLEEP rtc: imxdi: remove unused variable rtc: drop set_mms and set_mmss64 rtc: pcap: convert to SPDX identifier rtc: pcap: use .set_time rtc: pcap: switch to rtc_time64_to_tm/rtc_tm_to_time64 rtc: pcap: set range rtc: digicolor: convert to SPDX identifier rtc: digicolor: use .set_time rtc: digicolor: set range rtc: digicolor: fix possible race condition rtc: jz4740: convert to SPDX identifier rtc: jz4740: rework invalid time detection rtc: jz4740: use dev_pm_set_wake_irq() to simplify code rtc: jz4740: use .set_time rtc: jz4740: remove useless check rtc: jz4740: switch to rtc_time64_to_tm/rtc_tm_to_time64 rtc: jz4740: set range rtc: 88pm860x: prevent use-after-free on device remove rtc: Use dev_get_drvdata() ...

rtc: sh: set range

2019-04-04T08:07:09Z

The SH RTC is a BCD RTC with some version having 4 digits for the year. The range for the RTCs with only 2 digits for the year was unfortunately shifted to handle 1999 to 2098. Reviewed-by: Geert Uytterhoeven Signed-off-by: Alexandre Belloni

rtc: sh: fix possible race condition

2019-04-04T08:07:09Z

The IRQ is requested before the struct rtc is allocated and registered, but this struct is used in the IRQ handler. This may lead to a NULL pointer dereference. Switch to devm_rtc_allocate_device/rtc_register_device to allocate the rtc struct before requesting the IRQ. Reviewed-by: Geert Uytterhoeven Tested-by: Geert Uytterhoeven Signed-off-by: Alexandre Belloni

rtc: sh: stop resetting time to epoch

2019-04-04T08:07:09Z

There is no point in resetting the time to epoch as this means that userspace will never get the valuable information that time is actually invalid. Reviewed-by: Geert Uytterhoeven Tested-by: Geert Uytterhoeven [Anders Roxell : remove unused variable r] Signed-off-by: Anders Roxell Signed-off-by: Alexandre Belloni

rtc: sh: Fix invalid alarm warning for non-enabled alarm

2019-03-20T10:37:50Z

When no alarm has been programmed on RSK-RZA1, an error message is printed during boot: rtc rtc0: invalid alarm value: 2019-03-14T255:255:255 sh_rtc_read_alarm_value() returns 0xff when querying a hardware alarm field that is not enabled. __rtc_read_alarm() validates the received alarm values, and fills in missing fields when needed. While 0xff is handled fine for the year, month, and day fields, and corrected as considered being out-of-range, this is not the case for the hour, minute, and second fields, where -1 is expected for missing fields. Fix this by returning -1 instead, as this value is handled fine for all fields. Signed-off-by: Geert Uytterhoeven Signed-off-by: Alexandre Belloni

rtc: sh: convert to SPDX identifiers

2018-11-12T22:14:09Z

This patch updates license to use SPDX-License-Identifier instead of verbose license text. As original license mentioned, it is GPL-2.0 in SPDX. Then, MODULE_LICENSE() should be "GPL v2" instead of "GPL". See ${LINUX}/include/linux/module.h "GPL" [GNU Public License v2 or later] "GPL v2" [GNU Public License v2] Signed-off-by: Kuninori Morimoto Signed-off-by: Alexandre Belloni

Merge tag 'rtc-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

2018-08-20T23:30:27Z

Pull RTC updates from Alexandre Belloni: "It is now possible to add custom sysfs attributes while avoiding a possible race condition. Unused code has been removed resulting in a nice reduction of the code base. And more drivers have been switched to SPDX by their maintainers. Summary: Subsystem: - new helpers to add custom sysfs attributes - struct rtc_task removal along with rtc_irq_[un]register() - rtc_irq_set_state and rtc_irq_set_freq are not exported anymore Drivers: - armada38x: reset after rtc power loss - ds1307: now supports m41t11 - isl1208: now supports isl1219 and tamper detection - pcf2127: internal SRAM support" * tag 'rtc-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (34 commits) rtc: ds1307: simplify hwmon config rtc: s5m: Add SPDX license identifier rtc: maxim: Add SPDX license identifiers rtc: isl1219: add device tree documentation rtc: isl1208: set ev-evienb bit from device tree rtc: isl1208: Add "evdet" interrupt source for isl1219 rtc: isl1208: add support for isl1219 with tamper detection rtc: sysfs: facilitate attribute add to rtc device rtc: remove struct rtc_task char: rtc: remove task handling rtc: pcf85063: preserve control register value between stop and start rtc: sh: remove unused variable rtc_dev rtc: unexport rtc_irq_set_* rtc: simplify rtc_irq_set_state/rtc_irq_set_freq rtc: remove irq_task and irq_task_lock rtc: remove rtc_irq_register/rtc_irq_unregister rtc: sh: remove dead code rtc: sa1100: don't set PIE frequency rtc: ds1307: support m41t11 variant rtc: ds1307: fix data pointer to m41t0 ...

rtc: sh: remove unused variable rtc_dev

2018-07-27T15:27:40Z

When building rtc-sh, rtc_dev isn't used in function __sh_rtc_periodic. drivers/rtc/rtc-sh.c: In function ‘__sh_rtc_periodic’: drivers/rtc/rtc-sh.c:146:21: warning: unused variable ‘rtc_dev’ [-Wunused-variable] struct rtc_device *rtc_dev = rtc->rtc_dev; ^~~~~~~ Remove the declaration of rtc_dev to dispose the warning. Fixes: ec623ff014c4 ("rtc: sh: remove dead code") Signed-off-by: Anders Roxell Signed-off-by: Alexandre Belloni

rtc: sh: remove dead code

2018-07-26T13:08:39Z

Since commit 80d4bb515b78 ("RTC: Cleanup rtc_class_ops->irq_set_state") and commit 696160fec162 ("RTC: Cleanup rtc_class_ops->irq_set_freq()"), sh_rtc_irq_set_state and sh_rtc_irq_set_freq are never called. Remove them along with task handling. Signed-off-by: Alexandre Belloni

headers: separate linux/mod_devicetable.h from linux/platform_device.h

2018-07-07T15:52:26Z

At over 4000 #includes, is the 9th most #included header file in the Linux kernel. It does not need , so drop that header and explicitly add to source files that need it. 4146 #include After this patch, there are 225 files that use , for a reduction of around 3900 times that does not have to be read & parsed. 225 #include This patch was build-tested on 20 different arch-es. It also makes these drivers SubmitChecklist#1 compliant. Signed-off-by: Randy Dunlap Reported-by: kbuild test robot # drivers/media/platform/vimc/ Reported-by: kbuild test robot # drivers/pinctrl/pinctrl-u300.c Signed-off-by: Greg Kroah-Hartman