user/sven/linux.git/drivers/rtc, branch v3.10.107

rtc: s35390a: improve irq handling

2017-06-20T12:04:40Z

commit 3bd32722c827d00eafe8e6d5b83e9f3148ea7c7e upstream. On some QNAP NAS devices the rtc can wake the machine. Several people noticed that once the machine was woken this way it fails to shut down. That's because the driver fails to acknowledge the interrupt and so it keeps active and restarts the machine immediatly after shutdown. See https://bugs.debian.org/794266 for a bug report. Doing this correctly requires to interpret the INT2 flag of the first read of the STATUS1 register because this bit is cleared by read. Note this is not maximally robust though because a pending irq isn't detected when the STATUS1 register was already read (and so INT2 is not set) but the irq was not disabled. But that is a hardware imposed problem that cannot easily be fixed by software. Signed-off-by: Uwe Kleine-König Signed-off-by: Alexandre Belloni Signed-off-by: Willy Tarreau

rtc: s35390a: implement reset routine as suggested by the reference

2017-06-20T12:04:40Z

commit 8e6583f1b5d1f5f129b873f1428b7e414263d847 upstream. There were two deviations from the reference manual: you have to wait half a second when POC is active and you might have to repeat initialization when POC or BLD are still set after the sequence. Note however that as POC and BLD are cleared by read the driver might not be able to detect that a reset is necessary. I don't have a good idea how to fix this. Additionally report the value read from STATUS1 to the caller. This prepares the next patch. Signed-off-by: Uwe Kleine-König Signed-off-by: Alexandre Belloni Signed-off-by: Willy Tarreau

rtc: s35390a: make sure all members in the output are set

2017-06-20T12:04:39Z

commit ac4d4f65bbcba478309de36929016d2618421ba1 upstream. The rtc core calls the .read_alarm with all fields initialized to 0. As the s35390a driver doesn't touch some fields the returned date is interpreted as a date in January 1900. So make sure all fields are set to -1; some of them are then overwritten with the right data depending on the hardware state. In mainline this is done by commit d68778b80dd7 ("rtc: initialize output parameter for read alarm to "uninitialized"") in the core. This is considered to dangerous for stable as it might have side effects for other rtc drivers that might for example rely on alarm->time.tm_sec being initialized to 0. Signed-off-by: Uwe Kleine-König Signed-off-by: Willy Tarreau

rtc: interface: ignore expired timers when enqueuing new timers

2017-06-20T12:04:21Z

commit 2b2f5ff00f63847d95adad6289bd8b05f5983dd5 upstream. This patch fixes a RTC wakealarm issue, namely, the event fires during hibernate and is not cleared from the list, causing hwclock to block. The current enqueuing does not trigger an alarm if any expired timers already exist on the timerqueue. This can occur when a RTC wake alarm is used to wake a machine out of hibernate and the resumed state has old expired timers that have not been removed from the timer queue. This fix skips over any expired timers and triggers an alarm if there are no pending timers on the timerqueue. Note that the skipped expired timer will get reaped later on, so there is no need to clean it up immediately. The issue can be reproduced by putting a machine into hibernate and waking it with the RTC wakealarm. Running the example RTC test program from tools/testing/selftests/timers/rtctest.c after the hibernate will block indefinitely. With the fix, it no longer blocks after the hibernate resume. BugLink: http://bugs.launchpad.net/bugs/1333569 Signed-off-by: Colin Ian King Signed-off-by: Alexandre Belloni Cc: Sumit Semwal Signed-off-by: Jiri Slaby Signed-off-by: Willy Tarreau

rtc: vr41xx: Wire up alarm_irq_enable

2016-06-07T08:42:51Z

commit a25f4a95ec3cded34c1250364eba704c5e4fdac4 upstream. drivers/rtc/rtc-vr41xx.c:229: warning: âvr41xx_rtc_alarm_irq_enableâ defined but not used Apparently the conversion to alarm_irq_enable forgot to wire up the callback. Fixes: 16380c153a69c378 ("RTC: Convert rtc drivers to use the alarm_irq_enable method") Signed-off-by: Geert Uytterhoeven Signed-off-by: Alexandre Belloni Signed-off-by: Willy Tarreau

rtc: rtc-at91rm9200: fix infinite wait for ACKUPD irq

2014-06-26T19:12:37Z

commit 2fe121e1f5aa3bf31b418a9790db6c400e922291 upstream. The rtc user must wait at least 1 sec between each time/calandar update (see atmel's datasheet chapter "Updating Time/Calendar"). Use the 1Hz interrupt to update the at91_rtc_upd_rdy flag and wait for the at91_rtc_wait_upd_rdy event if the rtc is not ready. This patch fixes a deadlock in an uninterruptible wait when the RTC is updated more than once every second. AFAICT the bug is here from the beginning, but I think we should at least backport this fix to 3.10 and the following longterm and stable releases. Signed-off-by: Boris BREZILLON Reported-by: Bryan Evenson Tested-by: Bryan Evenson Cc: Andrew Victor Cc: Nicolas Ferre Cc: Jean-Christophe Plagniol-Villard Cc: Alessandro Zummo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

rtc-cmos: Add an alarm disable quirk

2014-02-13T21:48:03Z

commit d5a1c7e3fc38d9c7d629e1e47f32f863acbdec3d upstream. 41c7f7424259f ("rtc: Disable the alarm in the hardware (v2)") added the functionality to disable the RTC wake alarm when shutting down the box. However, there are at least two b0rked BIOSes we know about: https://bugzilla.novell.com/show_bug.cgi?id=812592 https://bugzilla.novell.com/show_bug.cgi?id=805740 where, when wakeup alarm is enabled in the BIOS, the machine reboots automatically right after shutdown, regardless of what wakeup time is programmed. Bisecting the issue lead to this patch so disable its functionality with a DMI quirk only for those boxes. Cc: Brecht Machiels Cc: Thomas Gleixner Cc: John Stultz Cc: Rabin Vincent Signed-off-by: Borislav Petkov [jstultz: Changed variable name for clarity, added extra dmi entry] Tested-by: Brecht Machiels Tested-by: Borislav Petkov Signed-off-by: John Stultz Signed-off-by: Greg Kroah-Hartman

rtc: max8907: weekday encoding fixes

2014-02-06T19:08:15Z

commit 75ea799df4cb07e505c91b4abaa87bc28aad3e66 upstream. The current MAX8907 driver has two issues related to weekday value handling: 1) The HW WEEKDAY register has range 0..6 rather than 1..7 as documented. Note that I validated the actual HW range by observing the HW register roll from 6->0 rather than 6->7->1 as would otherwise be expected. This matches Linux's tm_wday range of 0..6. When the CMOS RAM content is lost, the date returned from the device is 2007-01-01 00:00:00, which is a Monday. The WEEKDAY register reads 1 in this case. This matches the numbering in Linux's tm_wday field. Hence we should write Linux's tm_wday value to the register without modifying it. Hence, remove the +1/-1 calculations for WEEKDAY/tm_wday. 2) There's no need to make alarms match on the WEEKDAY register, since the other fields together uniquely define the alarm date/time. Ignoring the WEEKDAY value in the match isolates the driver from any incorrect value in the current time copy of the WEEKDAY register. Each change individually, or both together, solves an issue that I observed; "hwclock -r" would time out waiting for its alarm to fire if the CMOS RAM content had been lost, and hence the WEEKDAY register value mismatched what the driver expected it to be. "hwclock -w" would solve this by over-writing the HW default WEEKDAY register value with what the driver expected. Signed-off-by: Stephen Warren Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

drivers/rtc/rtc-at91rm9200.c: correct alarm over day/month wrap

2013-12-20T15:45:09Z

commit eb3c227289840eed95ddfb0516046f08d8993940 upstream. Update month and day of month to the alarm month/day instead of current day/month when setting the RTC alarm mask. Signed-off-by: Linus Pizunski Signed-off-by: Nicolas Ferre Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

drivers/rtc/rtc-max77686.c: Fix wrong register

2013-09-14T13:54:57Z

commit 1748cbf7f7c464593232cde914f5a103181a83b5 upstream. Fix a read of the wrong register when checking whether the RTC timer has reached the alarm time. Signed-off-by: Sangjung Woo Signed-off-by: Myugnjoo Ham Reviewed-by: Jonghwa Lee Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Jonghwan Choi Signed-off-by: Greg Kroah-Hartman