user/sven/linux.git/drivers/rtc, branch v4.19.127

rtc: 88pm860x: fix possible race condition

2020-04-23T08:30:18Z

[ Upstream commit 9cf4789e6e4673d0b2c96fa6bb0c35e81b43111a ] The RTC IRQ is requested before the struct rtc_device is allocated, this may lead to a NULL pointer dereference in the IRQ handler. To fix this issue, allocating the rtc_device struct before requesting the RTC IRQ using devm_rtc_allocate_device, and use rtc_register_device to register the RTC device. Also remove the unnecessary error message as the core already prints the info. Link: https://lore.kernel.org/r/20200311223956.51352-1-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin

rtc: omap: Use define directive for PIN_CONFIG_ACTIVE_HIGH

2020-04-17T08:48:51Z

commit c50156526a2f7176b50134e3e5fb108ba09791b2 upstream. Clang warns when one enumerated type is implicitly converted to another: drivers/rtc/rtc-omap.c:574:21: warning: implicit conversion from enumeration type 'enum rtc_pin_config_param' to different enumeration type 'enum pin_config_param' [-Wenum-conversion] {"ti,active-high", PIN_CONFIG_ACTIVE_HIGH, 0}, ~ ^~~~~~~~~~~~~~~~~~~~~~ drivers/rtc/rtc-omap.c:579:12: warning: implicit conversion from enumeration type 'enum rtc_pin_config_param' to different enumeration type 'enum pin_config_param' [-Wenum-conversion] PCONFDUMP(PIN_CONFIG_ACTIVE_HIGH, "input active high", NULL, false), ~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./include/linux/pinctrl/pinconf-generic.h:163:11: note: expanded from macro 'PCONFDUMP' .param = a, .display = b, .format = c, .has_arg = d \ ^ 2 warnings generated. It is expected that pinctrl drivers can extend pin_config_param because of the gap between PIN_CONFIG_END and PIN_CONFIG_MAX so this conversion isn't an issue. Most drivers that take advantage of this define the PIN_CONFIG variables as constants, rather than enumerated values. Do the same thing here so that Clang no longer warns. Link: https://github.com/ClangBuiltLinux/linux/issues/144 Signed-off-by: Nathan Chancellor Signed-off-by: Alexandre Belloni Signed-off-by: Greg Kroah-Hartman

rtc: max8907: add missing select REGMAP_IRQ

2020-03-25T07:06:12Z

commit 5d892919fdd0cefd361697472d4e1b174a594991 upstream. I have hit the following build error: armv7a-hardfloat-linux-gnueabi-ld: drivers/rtc/rtc-max8907.o: in function `max8907_rtc_probe': rtc-max8907.c:(.text+0x400): undefined reference to `regmap_irq_get_virq' max8907 should select REGMAP_IRQ Fixes: 94c01ab6d7544 ("rtc: add MAX8907 RTC driver") Cc: stable Signed-off-by: Corentin Labbe Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

rtc: cmos: Stop using shared IRQ

2020-02-14T21:33:24Z

commit b6da197a2e9670df6f07e6698629e9ce95ab614e upstream. As reported by Guilherme G. Piccoli: ---8<---8<---8<--- The rtc-cmos interrupt setting was changed in the commit 079062b28fb4 ("rtc: cmos: prevent kernel warning on IRQ flags mismatch") in order to allow shared interrupts; according to that commit's description, some machine got kernel warnings due to the interrupt line being shared between rtc-cmos and other hardware, and rtc-cmos didn't allow IRQ sharing that time. After the aforementioned commit though it was observed a huge increase in lost HPET interrupts in some systems, observed through the following kernel message: [...] hpet1: lost 35 rtc interrupts After investigation, it was narrowed down to the shared interrupts usage when having the kernel option "irqpoll" enabled. In this case, all IRQ handlers are called for non-timer interrupts, if such handlers are setup in shared IRQ lines. The rtc-cmos IRQ handler could be set to hpet_rtc_interrupt(), which will produce the kernel "lost interrupts" message after doing work - lots of readl/writel to HPET registers, which are known to be slow. Although "irqpoll" is not a default kernel option, it's used in some contexts, one being the kdump kernel (which is an already "impaired" kernel usually running with 1 CPU available), so the performance burden could be considerable. Also, the same issue would happen (in a shorter extent though) when using "irqfixup" kernel option. In a quick experiment, a virtual machine with uptime of 2 minutes produced >300 calls to hpet_rtc_interrupt() when "irqpoll" was set, whereas without sharing interrupts this number reduced to 1 interrupt. Machines with more hardware than a VM should generate even more unnecessary HPET interrupts in this scenario. ---8<---8<---8<--- After looking into the rtc-cmos driver history and DSDT table from the Microsoft Surface 3, we may notice that Hans de Goede submitted a correct fix (see dependency below). Thus, we simply revert the culprit commit. Fixes: 079062b28fb4 ("rtc: cmos: prevent kernel warning on IRQ flags mismatch") Depends-on: a1e23a42f1bd ("rtc: cmos: Do not assume irq 8 for rtc when there are no legacy irqs") Reported-by: Guilherme G. Piccoli Cc: Hans de Goede Signed-off-by: Andy Shevchenko Tested-by: Guilherme G. Piccoli Reviewed-by: Hans de Goede Link: https://lore.kernel.org/r/20200123131437.28157-1-andriy.shevchenko@linux.intel.com Signed-off-by: Alexandre Belloni Signed-off-by: Greg Kroah-Hartman

rtc: hym8563: Return -EINVAL if the time is known to be invalid

2020-02-14T21:33:24Z

commit f236a2a2ebabad0848ad0995af7ad1dc7029e895 upstream. The current code returns -EPERM when the voltage loss bit is set. Since the bit indicates that the time value is not valid, return -EINVAL instead, which is the appropriate error code for this situation. Fixes: dcaf03849352 ("rtc: add hym8563 rtc-driver") Signed-off-by: Paul Kocialkowski Link: https://lore.kernel.org/r/20191212153111.966923-1-paul.kocialkowski@bootlin.com Signed-off-by: Alexandre Belloni Signed-off-by: Greg Kroah-Hartman

rtc: pcf2127: bugfix: read rtc disables watchdog

2020-01-27T13:51:07Z

[ Upstream commit 7f43020e3bdb63d65661ed377682702f8b34d3ea ] The previous fix listed bulk read of registers as root cause of accendential disabling of watchdog, since the watchdog counter register (WD_VAL) was zeroed. Fixes: 3769a375ab83 rtc: pcf2127: bulk read only date and time registers. Tested with the same PCF2127 chip as Sean reveled root cause of WD_VAL register value zeroing was caused by reading CTRL2 register which is one of the watchdog feature control registers. So the solution is to not read the first two control registers (CTRL1 and CTRL2) in pcf2127_rtc_read_time as they are not needed anyway. Size of local buf variable is kept to allow easy usage of register defines to improve readability of code. Debug trace line was updated after CTRL1 and CTRL2 are no longer read from the chip. Also replaced magic numbers in buf access with register defines. Signed-off-by: Bruno Thomsen Link: https://lore.kernel.org/r/20190822131936.18772-3-bruno.thomsen@gmail.com Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin

rtc: rv3029: revert error handling patch to rv3029_eeprom_write()

2020-01-27T13:51:06Z

[ Upstream commit a6f26606ddd03c5eab8b2132f1bfaa768c06158f ] My error handling "cleanup" was totally wrong. Both the "err" and "ret" variables are required. The "err" variable holds the error codes for rv3029_eeprom_enter/exit() and the "ret" variable holds the error codes for if actual write fails. In my patch if the write failed, the function probably still returned success. Reported-by: Tom Evans Fixes: 97f5b0379c38 ("rtc: rv3029: Clean up error handling in rv3029_eeprom_write()") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/20190817065604.GB29951@mwanda Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin

rtc: pcf8563: Clear event flags and disable interrupts before requesting irq

2020-01-27T13:50:56Z

[ Upstream commit 3572e8aea3bf925dac1dbf86127657c39fe5c254 ] Besides the alarm, the PCF8563 also has a timer triggered interrupt. In cases where the previous system left the timer and interrupts on, or somehow the bits got enabled, the interrupt would keep triggering as the kernel doesn't know about it. Clear both the alarm and timer event flags, and disable the interrupts, before requesting the interrupt line. Fixes: ede3e9d47cca ("drivers/rtc/rtc-pcf8563.c: add alarm support") Fixes: a45d528aab8b ("rtc: pcf8563: clear expired alarm at boot time") Signed-off-by: Chen-Yu Tsai Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin

rtc: pcf8563: Fix interrupt trigger method

2020-01-27T13:50:56Z

[ Upstream commit 65f662cbf829834fa4d94190eb7691e5a9cb92d8 ] The PCF8563 datasheet says the interrupt line is active low and stays active until the events are cleared, i.e. a level trigger interrupt. Fix the flags used to request the interrupt. Fixes: ede3e9d47cca ("drivers/rtc/rtc-pcf8563.c: add alarm support") Signed-off-by: Chen-Yu Tsai Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin

rtc: mt6397: Don't call irq_dispose_mapping.

2020-01-27T13:50:37Z

[ Upstream commit 24db953e942bd7a983e97892bdaddf69d00b1199 ] The IRQ mapping was changed to not being created in the rtc-mt6397 driver, so the irq_dispose_mapping is no longer needed. Also the dev_id passed to free_irq should be the same as the last argument passed to request_threaded_irq. This prevents a "Trying to free already-free IRQ 274" warning when unbinding the driver. Fixes: e695d3a0b3b3 ("mfd: mt6397: Create irq mappings in mfd core driver") Signed-off-by: Pi-Hsun Shih Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin