user/sven/linux.git/drivers/rtc, branch v4.4.27

rtc: s3c: Add s3c_rtc_{enable/disable}_clk in s3c_rtc_setfreq()

2016-08-20T16:09:27Z

commit 70c96dfac0e231424e17743bd52f6cd2ff1f2439 upstream. As per code flow s3c_rtc_setfreq() will get called with rtc clock disabled and in set_freq we perform h/w registers read/write, which results in a kernel crash on exynos7 platform while probing rtc driver. Below is code flow: s3c_rtc_probe() clk_prepare_enable(info->rtc_clk) // rtc clock enabled s3c_rtc_gettime() // will enable clk if not done, and disable it upon exit s3c_rtc_setfreq() //then this will be called with clk disabled This patch take cares of such issue by adding s3c_rtc_{enable/disable}_clk in s3c_rtc_setfreq(). Fixes: 24e1455493da ("drivers/rtc/rtc-s3c.c: delete duplicate clock control") Signed-off-by: Alim Akhtar Reviewed-by: Krzysztof Kozlowski Reviewed-by: Pankaj Dubey Tested-by: Pankaj Dubey Signed-off-by: Alexandre Belloni Signed-off-by: Greg Kroah-Hartman

rtc: max77686: Properly handle regmap_irq_get_virq() error code

2016-05-04T21:48:52Z

commit fb166ba1d7f0a662f7332f4ff660a0d6f4d76915 upstream. The regmap_irq_get_virq() can return 0 or -EINVAL in error conditions but driver checked only for value of 0. This could lead to a cast of -EINVAL to an unsigned int used as a interrupt number for devm_request_threaded_irq(). Although this is not yet fatal (devm_request_threaded_irq() will just fail with -EINVAL) but might be a misleading when diagnosing errors. Signed-off-by: Krzysztof Kozlowski Fixes: 6f1c1e71d933 ("mfd: max77686: Convert to use regmap_irq") Reviewed-by: Javier Martinez Canillas Signed-off-by: Alexandre Belloni Signed-off-by: Greg Kroah-Hartman

rtc: rx8025: remove rv8803 id

2016-05-04T21:48:52Z

commit aaa3cee5deffa28415a6e1852c5afae0f5d210e2 upstream. The rv8803 has its own driver that should be used. Remove its id from the rx8025 driver. Fixes: b1f9d790b59dc04f8813a49a92ddd8651770ffee Signed-off-by: Alexandre Belloni Signed-off-by: Greg Kroah-Hartman

rtc: ds1685: passing bogus values to irq_restore

2016-05-04T21:48:51Z

commit 8c09b9fdecab1f4a289f07b46e2ad174b6641928 upstream. We call spin_lock_irqrestore with "flags" set to zero instead of to the value from spin_lock_irqsave(). Fixes: aaaf5fbf56f1 ('rtc: add driver for DS1685 family of real time clocks') Signed-off-by: Dan Carpenter Signed-off-by: Alexandre Belloni Signed-off-by: Greg Kroah-Hartman

rtc: vr41xx: Wire up alarm_irq_enable

2016-05-04T21:48:51Z

commit a25f4a95ec3cded34c1250364eba704c5e4fdac4 upstream. drivers/rtc/rtc-vr41xx.c:229: warning: ‘vr41xx_rtc_alarm_irq_enable’ defined but not used Apparently the conversion to alarm_irq_enable forgot to wire up the callback. Fixes: 16380c153a69c378 ("RTC: Convert rtc drivers to use the alarm_irq_enable method") Signed-off-by: Geert Uytterhoeven Signed-off-by: Alexandre Belloni Signed-off-by: Greg Kroah-Hartman

rtc: hym8563: fix invalid year calculation

2016-05-04T21:48:51Z

commit d5861262210067fc01b2fb4f7af2fd85a3453f15 upstream. Year field must be in BCD format, according to hym8563 datasheet. Due to the bug year 2016 became 2010. Fixes: dcaf03849352 ("rtc: add hym8563 rtc-driver") Signed-off-by: Alexander Kochetkov Signed-off-by: Alexandre Belloni Signed-off-by: Greg Kroah-Hartman

rtc: da9063: fix access ordering error during RTC interrupt at system power on

2015-12-20T12:39:29Z

This fix alters the ordering of the IRQ and device registrations in the RTC driver probe function. This change will apply to the RTC driver that supports both DA9063 and DA9062 PMICs. A problem could occur with the existing RTC driver if: A system is started from a cold boot using the PMIC RTC IRQ to initiate a power on operation. For instance, if an RTC alarm is used to start a platform from power off. The existing driver IRQ is requested before the device has been properly registered. i.e. ret = devm_request_threaded_irq() comes before rtc->rtc_dev = devm_rtc_device_register(); In this case, the interrupt can be called before the device has been registered and the handler can be called immediately. The IRQ handler da9063_alarm_event() contains the function call rtc_update_irq(rtc->rtc_dev, 1, RTC_IRQF | RTC_AF); which in turn tries to access the unavailable rtc->rtc_dev. The fix is to reorder the functions inside the RTC probe. The IRQ is requested after the RTC device resource has been registered so that get_irq_byname is the last thing to happen. Signed-off-by: Steve Twiss Signed-off-by: Alexandre Belloni

rtc: rk808: Compensate for Rockchip calendar deviation on November 31st

2015-12-20T12:39:00Z

In A.D. 1582 Pope Gregory XIII found that the existing Julian calendar insufficiently represented reality, and changed the rules about calculating leap years to account for this. Similarly, in A.D. 2013 Rockchip hardware engineers found that the new Gregorian calendar still contained flaws, and that the month of November should be counted up to 31 days instead. Unfortunately it takes a long time for calendar changes to gain widespread adoption, and just like more than 300 years went by before the last Protestant nation implemented Greg's proposal, we will have to wait a while until all religions and operating system kernels acknowledge the inherent advantages of the Rockchip system. Until then we need to translate dates read from (and written to) Rockchip hardware back to the Gregorian format. This patch works by defining Jan 1st, 2016 as the arbitrary anchor date on which Rockchip and Gregorian calendars are in sync. From that we can translate arbitrary later dates back and forth by counting the number of November/December transitons since the anchor date to determine the offset between the calendars. We choose this method (rather than trying to regularly "correct" the date stored in hardware) since it's the only way to ensure perfect time-keeping even if the system may be shut down for an unknown number of years. The drawback is that other software reading the same hardware (e.g. mainboard firmware) must use the same translation convention (including the same anchor date) to be able to read and write correct timestamps from/to the RTC. Signed-off-by: Julius Werner Reviewed-by: Douglas Anderson Signed-off-by: Alexandre Belloni

rtc: ds1307: fix alarm reading at probe time

2015-11-26T17:11:26Z

With the actual code, read_alarm() always returns -EINVAL when called during the RTC device registration. This prevents from retrieving an already configured alarm in hardware. This patch fixes the issue by moving the HAS_ALARM bit configuration (if supported by the hardware) above the rtc_device_register() call. Signed-off-by: Simon Guinot Signed-off-by: Alexandre Belloni

rtc: ds1307: fix kernel splat due to wakeup irq handling

2015-11-25T11:15:44Z

Since commit 3fffd1283927 ("i2c: allow specifying separate wakeup interrupt in device tree") we have automatic wakeup irq support for i2c devices. That commit missed the fact that rtc-1307 had its own wakeup irq handling and ended up introducing a kernel splat for at least Beagle x15 boards. Fix that by reverting original commit _and_ passing correct interrupt names on DTS so i2c-core can choose correct IRQ as wakeup. Now that we have automatic wakeirq support, we can revert the original commit which did it manually. Fixes the following warning: [ 10.346582] WARNING: CPU: 1 PID: 263 at linux/drivers/base/power/wakeirq.c:43 dev_pm_attach_wake_irq+0xbc/0xd4() [ 10.359244] rtc-ds1307 2-006f: wake irq already initialized Cc: Tony Lindgren Cc: Nishanth Menon Signed-off-by: Felipe Balbi Acked-by: Tony Lindgren Acked-by: Arnd Bergmann Signed-off-by: Alexandre Belloni