user/sven/linux.git/drivers/rtc, branch v4.9.80

rtc: set the alarm to the next expiring timer

2017-12-25T13:23:46Z

[ Upstream commit 74717b28cb32e1ad3c1042cafd76b264c8c0f68d ] If there is any non expired timer in the queue, the RTC alarm is never set. This is an issue when adding a timer that expires before the next non expired timer. Ensure the RTC alarm is set in that case. Fixes: 2b2f5ff00f63 ("rtc: interface: ignore expired timers when enqueuing new timers") Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

rtc: pl031: make interrupt optional

2017-12-25T13:23:43Z

[ Upstream commit 5b64a2965dfdfca8039e93303c64e2b15c19ff0c ] On some platforms, the interrupt for the PL031 is optional. Avoid trying to claim the interrupt if it's not specified. Reviewed-by: Linus Walleij Signed-off-by: Russell King Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

rtc: pcf8563: fix output clock rate

2017-12-20T09:07:27Z

[ Upstream commit a3350f9c57ffad569c40f7320b89da1f3061c5bb ] The pcf8563_clkout_recalc_rate function erroneously ignores the frequency index read from the CLKO register and always returns 32768 Hz. Fixes: a39a6405d5f9 ("rtc: pcf8563: add CLKOUT to common clock framework") Signed-off-by: Philipp Zabel Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

rtc: rx8010: change lock mechanism

2017-11-21T08:23:25Z

[ Upstream commit 666b5d1e9f8762300a410f9548b6e370d71dd382 ] Remove spinlock and use the "rtc->ops_lock" from RTC subsystem instead. spin_lock_irqsave() is not needed here because we do not have hard IRQs. This patch fixes the following issue: root@GE004097290448 b850v3:~# hwclock --systohc root@GE004097290448 b850v3:~# hwclock --systohc root@GE004097290448 b850v3:~# hwclock --systohc root@GE004097290448 b850v3:~# hwclock --systohc root@GE004097290448 b850v3:~# hwclock --systohc [ 82.108175] BUG: spinlock wrong CPU on CPU#0, hwclock/855 [ 82.113660] lock: 0xedb4899c, .magic: dead4ead, .owner: hwclock/855, .owner_cpu: 1 [ 82.121329] CPU: 0 PID: 855 Comm: hwclock Not tainted 4.8.0-00042-g09d5410-dirty #20 [ 82.129078] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 82.135609] Backtrace: [ 82.138090] [<8010d378>] (dump_backtrace) from [<8010d5c0>] (show_stack+0x20/0x24) [ 82.145664] r7:ec936000 r6:600a0013 r5:00000000 r4:81031680 [ 82.151402] [<8010d5a0>] (show_stack) from [<80401518>] (dump_stack+0xb4/0xe8) [ 82.158636] [<80401464>] (dump_stack) from [<8017b8b0>] (spin_dump+0x84/0xcc) [ 82.165775] r10:00000000 r9:ec936000 r8:81056090 r7:600a0013 r6:edb4899c r5:edb4899c [ 82.173691] r4:e5033e00 r3:00000000 [ 82.177308] [<8017b82c>] (spin_dump) from [<8017bcb0>] (do_raw_spin_unlock+0x108/0x130) [ 82.185314] r5:edb4899c r4:edb4899c [ 82.188938] [<8017bba8>] (do_raw_spin_unlock) from [<8094b93c>] (_raw_spin_unlock_irqrestore+0x34/0x54) [ 82.198333] r5:edb4899c r4:600a0013 [ 82.201953] [<8094b908>] (_raw_spin_unlock_irqrestore) from [<8065b090>] (rx8010_set_time+0x14c/0x188) [ 82.211261] r5:00000020 r4:edb48990 [ 82.214882] [<8065af44>] (rx8010_set_time) from [<80653fe4>] (rtc_set_time+0x70/0x104) [ 82.222801] r7:00000051 r6:edb39da0 r5:edb39c00 r4:ec937e8c [ 82.228535] [<80653f74>] (rtc_set_time) from [<80655774>] (rtc_dev_ioctl+0x3c4/0x674) [ 82.236368] r7:00000051 r6:7ecf1b74 r5:00000000 r4:edb39c00 [ 82.242106] [<806553b0>] (rtc_dev_ioctl) from [<80284034>] (do_vfs_ioctl+0xa4/0xa6c) [ 82.249851] r8:00000003 r7:80284a40 r6:ed1e9c80 r5:edb44e60 r4:7ecf1b74 [ 82.256642] [<80283f90>] (do_vfs_ioctl) from [<80284a40>] (SyS_ioctl+0x44/0x6c) [ 82.263953] r10:00000000 r9:ec936000 r8:7ecf1b74 r7:4024700a r6:ed1e9c80 r5:00000003 [ 82.271869] r4:ed1e9c80 [ 82.274432] [<802849fc>] (SyS_ioctl) from [<80108520>] (ret_fast_syscall+0x0/0x1c) [ 82.282005] r9:ec936000 r8:801086c4 r7:00000036 r6:00000000 r5:00000003 r4:0008e1bc root@GE004097290448 b850v3:~# Message from syslogd@GE004097290448 at Dec 3 11:17:08 ... kernel:[ 82.108175] BUG: spinlock wrong CPU on CPU#0, hwclock/855 Message from syslogd@GE004097290448 at Dec 3 11:17:08 ... kernel:[ 82.113660] lock: 0xedb4899c, .magic: dead4ead, .owner: hwclock/855, .owner_cpu: 1 hwclock --systohc root@GE004097290448 b850v3:~# Signed-off-by: Fabien Lahoudere Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

rtc: tegra: Implement clock handling

2017-04-21T07:31:24Z

commit 5fa4086987506b2ab8c92f8f99f2295db9918856 upstream. Accessing the registers of the RTC block on Tegra requires the module clock to be enabled. This only works because the RTC module clock will be enabled by default during early boot. However, because the clock is unused, the CCF will disable it at late_init time. This causes the RTC to become unusable afterwards. This can easily be reproduced by trying to use the RTC: $ hwclock --rtc /dev/rtc1 This will hang the system. I ran into this by following up on a report by Martin Michlmayr that reboot wasn't working on Tegra210 systems. It turns out that the rtc-tegra driver's ->shutdown() implementation will hang the CPU, because of the disabled clock, before the system can be rebooted. What confused me for a while is that the same driver is used on prior Tegra generations where the hang can not be observed. However, as Peter De Schrijver pointed out, this is because on 32-bit Tegra chips the RTC clock is enabled by the tegra20_timer.c clocksource driver, which uses the RTC to provide a persistent clock. This code is never enabled on 64-bit Tegra because the persistent clock infrastructure does not exist on 64-bit ARM. The proper fix for this is to add proper clock handling to the RTC driver in order to ensure that the clock is enabled when the driver requires it. All device trees contain the clock already, therefore no additional changes are required. Reported-by: Martin Michlmayr Acked-By Peter De Schrijver Signed-off-by: Thierry Reding Signed-off-by: Alexandre Belloni [bwh: Backported to 4.9: adjust context] Signed-off-by: Ben Hutchings Signed-off-by: Greg Kroah-Hartman

rtc: sun6i: Switch to the external oscillator

2017-03-12T05:41:52Z

commit fb61bb82cb46a932ef2fc62e1c731c8e7e6640d5 upstream. The RTC is clocked from either an internal, imprecise, oscillator or an external one, which is usually much more accurate. The difference perceived between the time elapsed and the time reported by the RTC is in a 10% scale, which prevents the RTC from being useful at all. Fortunately, the external oscillator is reported to be mandatory in the Allwinner datasheet, so we can just switch to it. Fixes: 9765d2d94309 ("rtc: sun6i: Add sun6i RTC driver") Signed-off-by: Maxime Ripard Signed-off-by: Alexandre Belloni Signed-off-by: Greg Kroah-Hartman

rtc: sun6i: Add some locking

2017-03-12T05:41:52Z

commit a9422a19ce270a22fc520f2278fb7e80c58be508 upstream. Some registers have a read-modify-write access pattern that are not atomic. Add some locking to prevent from concurrent accesses. Acked-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Signed-off-by: Alexandre Belloni Signed-off-by: Greg Kroah-Hartman

rtc: sun6i: Disable the build as a module

2017-03-12T05:41:52Z

commit 3753941475ae6501dcd1e41832bd0e6c35247d6a upstream. Since we have to provide the clock very early on, the RTC driver cannot be built as a module. Make sure that won't happen. Signed-off-by: Maxime Ripard Signed-off-by: Alexandre Belloni Signed-off-by: Greg Kroah-Hartman

rtc: omap: prevent disabling of clock/module during suspend

2016-11-04T22:11:39Z

If RTC is running from an internal clock source, the RTC module can't be disabled; otherwise it stops ticking completely. Current suspend handler implementation disables the clock/module unconditionally, instead fix this by disabling the clock only if we are running on external clock source, which is not affected by suspend. The prevention of disabling the clock must be done via implementing the runtime_pm handlers for the device, and returning an error code from the runtime suspend handler; otherwise OMAP core PM will disable the clocks for the driver. Signed-off-by: Tero Kristo Signed-off-by: Keerthy Signed-off-by: Alexandre Belloni

rtc: omap: Fix selecting external osc

2016-11-04T22:11:37Z

RTC can be clocked from an external 32KHz oscillator, or from the Peripheral PLL. The RTC has an internal oscillator buffer to support direct operation with a crystal. ---------------------------------------- | Device --------- | | | | | | | RTCSS | | | --------- | | | OSC |<------| RTC | | | | |------>| OSC |--- | | | | -------- | | | | | ----|clk | | | -------- | | | | | | PRCM |--- | | | | -------- -------- | ---------------------------------------- The RTC functional clock is sourced by default from the clock derived from the Peripheral PLL. In order to select source as external osc clk the following changes needs to be done: - Enable the RTC OSC (RTC_OSC_REG[4]OSC32K_GZ = 0) - Enable the clock mux(RTC_OSC_REG[6]K32CLK_EN = 1) - Select the external clock source (RTC_OSC_REG[3]32KCLK_SEL = 1) Fixes: 399cf0f63f6f2 ("rtc: omap: Add external clock enabling support") Signed-off-by: Keerthy Signed-off-by: Lokesh Vutla Signed-off-by: Dave Gerlach Signed-off-by: Alexandre Belloni