user/sven/linux.git/drivers/rtc, branch v5.11.9

rtc: zynqmp: depend on HAS_IOMEM

2021-03-04T11:14:51Z

[ Upstream commit ddd0521549a975e6148732d6ca6b89ffa862c0e5 ] The Xilinx zynqmp RTC driver makes use of IOMEM functions like devm_platform_ioremap_resource(), which are only available if CONFIG_HAS_IOMEM is defined. This causes the driver not to be enable under make ARCH=um allyesconfig, even though it won't build. By adding a dependency on HAS_IOMEM, the driver will not be enabled on architectures which don't support it. Fixes: 09ef18bcd5ac ("rtc: use devm_platform_ioremap_resource() to simplify code") Signed-off-by: David Gow Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20210127035146.1523286-1-davidgow@google.com Signed-off-by: Sasha Levin

rtc: s5m: select REGMAP_I2C

2021-03-04T11:14:39Z

[ Upstream commit 1f0cbda3b452b520c5f3794f8f0e410e8bc7386a ] The rtc-s5m uses the I2C regmap but doesn't select it in Kconfig so depending on the configuration the build may fail. Fix it. Fixes: 959df7778bbd ("rtc: Enable compile testing for Maxim and Samsung drivers") Signed-off-by: Bartosz Golaszewski Reviewed-by: Krzysztof Kozlowski Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20210114102219.23682-2-brgl@bgdev.pl Signed-off-by: Sasha Levin

rtc: rx6110: fix build against modular I2C

2021-03-04T11:14:34Z

[ Upstream commit def8550f543e6c9101f3e1a03160b2aab8c02e8a ] With CONFIG_I2C=m, the #ifdef section is disabled, as shown by this warning: drivers/rtc/rtc-rx6110.c:314:12: error: unused function 'rx6110_probe' [-Werror,-Wunused-function] Change the driver to use IS_ENABLED() instead, which works for both module and built-in subsystems. Fixes: afa819c2c6bf ("rtc: rx6110: add i2c support") Signed-off-by: Arnd Bergmann Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20201230145938.3254459-1-arnd@kernel.org Signed-off-by: Sasha Levin

rtc: mc146818: Dont test for bit 0-5 in Register D

2021-02-02T19:35:02Z

The recent change to validate the RTC turned out to be overly tight. While it cures the problem on the reporters machine it breaks machines with Intel chipsets which use bit 0-5 of the D register. So check only for bit 6 being 0 which is the case on these Intel machines as well. Fixes: 211e5db19d15 ("rtc: mc146818: Detect and handle broken RTCs") Reported-by: Serge Belyshev Reported-by: Dirk Gouders Reported-by: Borislav Petkov Signed-off-by: Thomas Gleixner Tested-by: Dirk Gouders Tested-by: Len Brown Tested-by: Borislav Petkov Acked-by: Alexandre Belloni Link: https://lore.kernel.org/r/87zh0nbnha.fsf@nanos.tec.linutronix.de

rtc: mc146818: Detect and handle broken RTCs

2021-01-27T08:36:22Z

The recent fix for handling the UIP bit unearthed another issue in the RTC code. If the RTC is advertised but the readout is straight 0xFF because it's not available, the old code just proceeded with crappy values, but the new code hangs because it waits for the UIP bit to become low. Add a sanity check in the RTC CMOS probe function which reads the RTC_VALID register (Register D) which should have bit 0-6 cleared. If that's not the case then fail to register the CMOS. Add the same check to mc146818_get_time(), warn once when the condition is true and invalidate the rtc_time data. Reported-by: Mickaël Salaün Signed-off-by: Thomas Gleixner Tested-by: Mickaël Salaün Acked-by: Alexandre Belloni Link: https://lore.kernel.org/r/87tur3fx7w.fsf@nanos.tec.linutronix.de

Merge tag 'rtc-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

2020-12-20T18:12:06Z

Pull RTC updates from Alexandre Belloni: "Subsystem: - Remove nvram ABI. There was no complaints about the deprecation for the last 3 years. - Improve RTC device allocation and registration - Now available for ARCH=um Drivers: - at91rm9200: correction and sam9x60 support - ds1307: improve ACPI support - mxc: now DT only - pcf2127: watchdog support now needs the reset-source property - pcf8523: set range - rx6110: i2c support" * tag 'rtc-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (43 commits) rtc: pcf2127: only use watchdog when explicitly available dt-bindings: rtc: add reset-source property rtc: fix RTC removal rtc: s3c: Remove dead code related to periodic tick handling rtc: s3c: Disable all enable (RTC, tick) bits in the probe rtc: ep93xx: Fix NULL pointer dereference in ep93xx_rtc_read_time rtc: test: remove debug message rtc: mxc{,_v2}: enable COMPILE_TEST rtc: enable RTC framework on ARCH=um rtc: pcf8523: use BIT rtc: pcf8523: set range rtc: pcf8523: switch to devm_rtc_allocate_device rtc: destroy mutex when releasing the device rtc: shrink devm_rtc_allocate_device() rtc: rework rtc_register_device() resource management rtc: nvmem: emit an error message when nvmem registration fails rtc: add devm_ prefix to rtc_nvmem_register() rtc: nvmem: remove nvram ABI Documentation: list RTC devres helpers in devres.rst rtc: omap: use devm_pinctrl_register() ...

rtc: pcf2127: only use watchdog when explicitly available

2020-12-19T00:57:44Z

Most boards using the pcf2127 chip (in my bubble) don't make use of the watchdog functionality and the respective output is not connected. The effect on such a board is that there is a watchdog device provided that doesn't work. So only register the watchdog if the device tree has a "reset-source" property. Signed-off-by: Uwe Kleine-König [RV: s/has-watchdog/reset-source/] Signed-off-by: Rasmus Villemoes Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20201218101054.25416-3-rasmus.villemoes@prevas.dk

rtc: fix RTC removal

2020-12-15T23:33:33Z

Since the rtc_register_device, removing an RTC device will end with a refcount_t: underflow; use-after-free warning since put_device is called twice in the device tear down path. Fixes: fdcfd854333b ("rtc: rework rtc_register_device() resource management") Signed-off-by: Alexandre Belloni Reviewed-by: Bartosz Golaszewski Link: https://lore.kernel.org/r/20201205231449.610980-1-alexandre.belloni@bootlin.com

ntp: Make the RTC sync offset less obscure

2020-12-11T09:40:53Z

The current RTC set_offset_nsec value is not really intuitive to understand. tsched twrite(t2.tv_sec - 1) t2 (seconds increment) The offset is calculated from twrite based on the assumption that t2 - twrite == 1s. That means for the MC146818 RTC the offset needs to be negative so that the write happens 500ms before t2. It's easier to understand when the whole calculation is based on t2. That avoids negative offsets and the meaning is obvious: t2 - twrite: The time defined by the chip when seconds increment after the write. twrite - tsched: The time for the transport to the point where the chip is updated. ==> set_offset_nsec = t2 - tsched ttransport = twrite - tsched tRTCinc = t2 - twrite ==> set_offset_nsec = ttransport + tRTCinc tRTCinc is a chip property and can be obtained from the data sheet. ttransport depends on how the RTC is connected. It is close to 0 for directly accessible RTCs. For RTCs behind a slow bus, e.g. i2c, it's the time required to send the update over the bus. This can be estimated or even calibrated, but that's a different problem. Adjust the implementation and update comments accordingly. Signed-off-by: Thomas Gleixner Acked-by: Alexandre Belloni Link: https://lore.kernel.org/r/20201206220542.263204937@linutronix.de

ntp, rtc: Move rtc_set_ntp_time() to ntp code

2020-12-11T09:40:52Z

rtc_set_ntp_time() is not really RTC functionality as the code is just a user of RTC. Move it into the NTP code which allows further cleanups. Requested-by: Alexandre Belloni Signed-off-by: Thomas Gleixner Reviewed-by: Jason Gunthorpe Acked-by: Alexandre Belloni Link: https://lore.kernel.org/r/20201206220542.166871172@linutronix.de