user/sven/linux.git/drivers/rtc, branch v5.4.58

rtc: rv3028: Add missed check for devm_regmap_init_i2c()

2020-06-24T15:50:36Z

[ Upstream commit c3b29bf6f166f6ed5f04f9c125477358e0e25df8 ] rv3028_probe() misses a check for devm_regmap_init_i2c(). Add the missed check to fix it. Fixes: e6e7376cfd7b ("rtc: rv3028: add new driver") Signed-off-by: Chuhong Yuan Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20200528103950.912353-1-hslester96@gmail.com Signed-off-by: Sasha Levin

rtc: mc13xxx: fix a double-unlock issue

2020-06-24T15:50:12Z

[ Upstream commit 8816cd726a4fee197af2d851cbe25991ae19ea14 ] In function mc13xxx_rtc_probe, the mc13xxx_unlock() is called before rtc_register_device(). But in the error path of rtc_register_device(), the mc13xxx_unlock() is called again, which causes a double-unlock problem. Thus add a call of the function “mc13xxx_lock” in an if branch for the completion of the exception handling. Fixes: e4ae7023e182a ("rtc: mc13xxx: set range") Signed-off-by: Qiushi Wu Link: https://lore.kernel.org/r/20200503182235.1652-1-wu000273@umn.edu Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin

rtc: 88pm860x: fix possible race condition

2020-04-23T08:36:31Z

[ Upstream commit 9cf4789e6e4673d0b2c96fa6bb0c35e81b43111a ] The RTC IRQ is requested before the struct rtc_device is allocated, this may lead to a NULL pointer dereference in the IRQ handler. To fix this issue, allocating the rtc_device struct before requesting the RTC IRQ using devm_rtc_allocate_device, and use rtc_register_device to register the RTC device. Also remove the unnecessary error message as the core already prints the info. Link: https://lore.kernel.org/r/20200311223956.51352-1-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin

rtc: max8907: add missing select REGMAP_IRQ

2020-03-25T07:25:56Z

commit 5d892919fdd0cefd361697472d4e1b174a594991 upstream. I have hit the following build error: armv7a-hardfloat-linux-gnueabi-ld: drivers/rtc/rtc-max8907.o: in function `max8907_rtc_probe': rtc-max8907.c:(.text+0x400): undefined reference to `regmap_irq_get_virq' max8907 should select REGMAP_IRQ Fixes: 94c01ab6d7544 ("rtc: add MAX8907 RTC driver") Cc: stable Signed-off-by: Corentin Labbe Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

rtc: Kconfig: select REGMAP_I2C when necessary

2020-02-24T07:37:03Z

[ Upstream commit 578c2b661e2b1b474ea3571a3c3c6d57bae89e8d ] Some i2c RTC drivers are using regmap but are not selecting REGMAP_I2C which may lead to build failures. Link: https://lore.kernel.org/r/20200127221724.10160-2-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin

rtc: i2c/spi: Avoid inclusion of REGMAP support when not needed

2020-02-24T07:36:31Z

[ Upstream commit 34719de919af07682861cb0fa2bcf64da33ecf44 ] Merely enabling I2C and RTC selects REGMAP_I2C and REGMAP_SPI, even when no driver needs it. While the former can be moduler, the latter cannot, and thus becomes built-in. Fix this by moving the select statements for REGMAP_I2C and REGMAP_SPI from the RTC_I2C_AND_SPI helper to the individual drivers that depend on it. Note that the comment for RTC_I2C_AND_SPI refers to SND_SOC_I2C_AND_SPI for more information, but the latter does not select REGMAP_{I2C,SPI} itself, and defers that to the individual drivers, too. Fixes: 080481f54ef62121 ("rtc: merge ds3232 and ds3234") Signed-off-by: Geert Uytterhoeven Reported-by: kbuild test robot Reported-by: kbuild test robot Link: https://lore.kernel.org/r/20200112171349.22268-1-geert@linux-m68k.org Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin

rtc: cmos: Stop using shared IRQ

2020-02-14T21:34:12Z

commit b6da197a2e9670df6f07e6698629e9ce95ab614e upstream. As reported by Guilherme G. Piccoli: ---8<---8<---8<--- The rtc-cmos interrupt setting was changed in the commit 079062b28fb4 ("rtc: cmos: prevent kernel warning on IRQ flags mismatch") in order to allow shared interrupts; according to that commit's description, some machine got kernel warnings due to the interrupt line being shared between rtc-cmos and other hardware, and rtc-cmos didn't allow IRQ sharing that time. After the aforementioned commit though it was observed a huge increase in lost HPET interrupts in some systems, observed through the following kernel message: [...] hpet1: lost 35 rtc interrupts After investigation, it was narrowed down to the shared interrupts usage when having the kernel option "irqpoll" enabled. In this case, all IRQ handlers are called for non-timer interrupts, if such handlers are setup in shared IRQ lines. The rtc-cmos IRQ handler could be set to hpet_rtc_interrupt(), which will produce the kernel "lost interrupts" message after doing work - lots of readl/writel to HPET registers, which are known to be slow. Although "irqpoll" is not a default kernel option, it's used in some contexts, one being the kdump kernel (which is an already "impaired" kernel usually running with 1 CPU available), so the performance burden could be considerable. Also, the same issue would happen (in a shorter extent though) when using "irqfixup" kernel option. In a quick experiment, a virtual machine with uptime of 2 minutes produced >300 calls to hpet_rtc_interrupt() when "irqpoll" was set, whereas without sharing interrupts this number reduced to 1 interrupt. Machines with more hardware than a VM should generate even more unnecessary HPET interrupts in this scenario. ---8<---8<---8<--- After looking into the rtc-cmos driver history and DSDT table from the Microsoft Surface 3, we may notice that Hans de Goede submitted a correct fix (see dependency below). Thus, we simply revert the culprit commit. Fixes: 079062b28fb4 ("rtc: cmos: prevent kernel warning on IRQ flags mismatch") Depends-on: a1e23a42f1bd ("rtc: cmos: Do not assume irq 8 for rtc when there are no legacy irqs") Reported-by: Guilherme G. Piccoli Cc: Hans de Goede Signed-off-by: Andy Shevchenko Tested-by: Guilherme G. Piccoli Reviewed-by: Hans de Goede Link: https://lore.kernel.org/r/20200123131437.28157-1-andriy.shevchenko@linux.intel.com Signed-off-by: Alexandre Belloni Signed-off-by: Greg Kroah-Hartman

rtc: hym8563: Return -EINVAL if the time is known to be invalid

2020-02-14T21:34:12Z

commit f236a2a2ebabad0848ad0995af7ad1dc7029e895 upstream. The current code returns -EPERM when the voltage loss bit is set. Since the bit indicates that the time value is not valid, return -EINVAL instead, which is the appropriate error code for this situation. Fixes: dcaf03849352 ("rtc: add hym8563 rtc-driver") Signed-off-by: Paul Kocialkowski Link: https://lore.kernel.org/r/20191212153111.966923-1-paul.kocialkowski@bootlin.com Signed-off-by: Alexandre Belloni Signed-off-by: Greg Kroah-Hartman

rtc: bd70528: fix module alias to autoload module

2020-01-26T09:01:06Z

[ Upstream commit afe19a7ae8b6b6032d04d3895ebd5bbac7fe9f30 ] The module alias platform tag contains a spelling mistake. Fix it. Fixes: f33506abbcdd ("rtc: bd70528: Add MODULE ALIAS to autoload module") Signed-off-by: Colin Ian King Link: https://lore.kernel.org/r/20191106083418.159045-1-colin.king@canonical.com Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin

rtc: bd70528: Add MODULE ALIAS to autoload module

2020-01-17T18:49:03Z

commit c3e12e66b14a043daac6b3d0559df80b9ed7679c upstream. The bd70528 RTC driver is probed by MFD driver. Add MODULE_ALIAS in order to allow udev to load the module when MFD sub-device cell for RTC is added. I'm not sure if this is a bugfix or feature addition but I guess fixes tag won't harm in this case. Fixes: 32a4a4ebf768 ("rtc: bd70528: Initial support for ROHM bd70528 RTC") Signed-off-by: Matti Vaittinen Link: https://lore.kernel.org/r/20191023114711.GA13954@localhost.localdomain Signed-off-by: Alexandre Belloni Signed-off-by: Greg Kroah-Hartman