user/sven/linux.git/drivers/scsi, branch v4.4.271

scsi: libsas: Use _safe() loop in sas_resume_port()

2021-06-03T06:22:08Z

[ Upstream commit 8c7e7b8486cda21269d393245883c5e4737d5ee7 ] If sas_notify_lldd_dev_found() fails then this code calls: sas_unregister_dev(port, dev); which removes "dev", our list iterator, from the list. This could lead to an endless loop. We need to use list_for_each_entry_safe(). Link: https://lore.kernel.org/r/YKUeq6gwfGcvvhty@mwanda Fixes: 303694eeee5e ("[SCSI] libsas: suspend / resume support") Reviewed-by: John Garry Signed-off-by: Dan Carpenter Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: BusLogic: Fix 64-bit system enumeration error for Buslogic

2021-06-03T06:22:08Z

[ Upstream commit 56f396146af278135c0ff958c79b5ee1bd22453d ] Commit 391e2f25601e ("[SCSI] BusLogic: Port driver to 64-bit") introduced a serious issue for 64-bit systems. With this commit, 64-bit kernel will enumerate 8*15 non-existing disks. This is caused by the broken CCB structure. The change from u32 data to void *data increased CCB length on 64-bit system, which introduced an extra 4 byte offset of the CDB. This leads to incorrect response to INQUIRY commands during enumeration. Fix disk enumeration failure by reverting the portion of the commit above which switched the data pointer from u32 to void. Link: https://lore.kernel.org/r/C325637F-1166-4340-8F0F-3BCCD59D4D54@vmware.com Acked-by: Khalid Aziz Signed-off-by: Matt Wang Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: qla2xxx: Fix error return code in qla82xx_write_flash_dword()

2021-05-26T09:27:31Z

[ Upstream commit 5cb289bf2d7c34ca1abd794ce116c4f19185a1d4 ] Fix to return a negative error code from the error handling case instead of 0 as done elsewhere in this function. Link: https://lore.kernel.org/r/20210514090952.6715-1-thunder.leizhen@huawei.com Fixes: a9083016a531 ("[SCSI] qla2xxx: Add ISP82XX support.") Reported-by: Hulk Robot Reviewed-by: Himanshu Madhani Signed-off-by: Zhen Lei Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: sni_53c710: Add IRQ check

2021-05-22T08:38:24Z

[ Upstream commit 1160d61bc51e87e509cfaf9da50a0060f67b6de4 ] The driver neglects to check the result of platform_get_irq()'s call and blithely passes the negative error codes to request_irq() (which takes *unsigned* IRQ #s), causing it to fail with -EINVAL (overridden by -ENODEV further below). Stop calling request_irq() with the invalid IRQ #s. Link: https://lore.kernel.org/r/8f4b8fa5-8251-b977-70a1-9099bcb4bb17@omprussia.ru Fixes: c27d85f3f3c5 ("[SCSI] SNI RM 53c710 driver") Signed-off-by: Sergey Shtylyov Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: sun3x_esp: Add IRQ check

2021-05-22T08:38:24Z

[ Upstream commit 14b321380eb333c82853d7d612d0995f05f88fdc ] The driver neglects to check the result of platform_get_irq()'s call and blithely passes the negative error codes to request_irq() (which takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding the real error code. Stop calling request_irq() with the invalid IRQ #s. Link: https://lore.kernel.org/r/363eb4c8-a3bf-4dc9-2a9e-90f349030a15@omprussia.ru Fixes: 0bb67f181834 ("[SCSI] sun3x_esp: convert to esp_scsi") Signed-off-by: Sergey Shtylyov Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: jazz_esp: Add IRQ check

2021-05-22T08:38:24Z

[ Upstream commit 38fca15c29db6ed06e894ac194502633e2a7d1fb ] The driver neglects to check the result of platform_get_irq()'s call and blithely passes the negative error codes to request_irq() (which takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding the real error code. Stop calling request_irq() with the invalid IRQ #s. Link: https://lore.kernel.org/r/594aa9ae-2215-49f6-f73c-33bd38989912@omprussia.ru Fixes: 352e921f0dd4 ("[SCSI] jazz_esp: converted to use esp_core") Signed-off-by: Sergey Shtylyov Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: libfc: Fix a format specifier

2021-05-22T08:38:19Z

[ Upstream commit 90d6697810f06aceea9de71ad836a8c7669789cd ] Since the 'mfs' member has been declared as 'u32' in include/scsi/libfc.h, use the %u format specifier instead of %hu. This patch fixes the following clang compiler warning: warning: format specifies type 'unsigned short' but the argument has type 'u32' (aka 'unsigned int') [-Wformat] "lport->mfs:%hu\n", mfs, lport->mfs); ~~~ ^~~~~~~~~~ %u Link: https://lore.kernel.org/r/20210415220826.29438-8-bvanassche@acm.org Cc: Hannes Reinecke Signed-off-by: Bart Van Assche Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: lpfc: Fix crash when a REG_RPI mailbox fails triggering a LOGO response

2021-05-22T08:38:19Z

[ Upstream commit fffd18ec6579c2d9c72b212169259062fe747888 ] Fix a crash caused by a double put on the node when the driver completed an ACC for an unsolicted abort on the same node. The second put was executed by lpfc_nlp_not_used() and is wrong because the completion routine executes the nlp_put when the iocbq was released. Additionally, the driver is issuing a LOGO then immediately calls lpfc_nlp_set_state to put the node into NPR. This call does nothing. Remove the lpfc_nlp_not_used call and additional set_state in the completion routine. Remove the lpfc_nlp_set_state post issue_logo. Isn't necessary. Link: https://lore.kernel.org/r/20210412013127.2387-3-jsmart2021@gmail.com Co-developed-by: Justin Tee Signed-off-by: Justin Tee Signed-off-by: James Smart Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: libsas: Reset num_scatter if libata marks qc as NODATA

2021-04-28T10:05:46Z

commit 176ddd89171ddcf661862d90c5d257877f7326d6 upstream. When the cache_type for the SCSI device is changed, the SCSI layer issues a MODE_SELECT command. The caching mode details are communicated via a request buffer associated with the SCSI command with data direction set as DMA_TO_DEVICE (scsi_mode_select()). When this command reaches the libata layer, as a part of generic initial setup, libata layer sets up the scatterlist for the command using the SCSI command (ata_scsi_qc_new()). This command is then translated by the libata layer into ATA_CMD_SET_FEATURES (ata_scsi_mode_select_xlat()). The libata layer treats this as a non-data command (ata_mselect_caching()), since it only needs an ATA taskfile to pass the caching on/off information to the device. It does not need the scatterlist that has been setup, so it does not perform dma_map_sg() on the scatterlist (ata_qc_issue()). Unfortunately, when this command reaches the libsas layer (sas_ata_qc_issue()), libsas layer sees it as a non-data command with a scatterlist. It cannot extract the correct DMA length since the scatterlist has not been mapped with dma_map_sg() for a DMA operation. When this partially constructed SAS task reaches pm80xx LLDD, it results in the following warning: "pm80xx_chip_sata_req 6058: The sg list address start_addr=0x0000000000000000 data_len=0x0end_addr_high=0xffffffff end_addr_low=0xffffffff has crossed 4G boundary" Update libsas to handle ATA non-data commands separately so num_scatter and total_xfer_len remain 0. Link: https://lore.kernel.org/r/20210318225632.2481291-1-jollys@google.com Fixes: 53de092f47ff ("scsi: libsas: Set data_dir as DMA_NONE if libata marks qc as NODATA") Tested-by: Luo Jiaxing Reviewed-by: John Garry Signed-off-by: Jolly Shah Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

scsi: qla2xxx: Fix broken #endif placement

2021-04-07T10:04:20Z

[ Upstream commit 5999b9e5b1f8a2f5417b755130919b3ac96f5550 ] Only half of the file is under include guard because terminating #endif is placed too early. Link: https://lore.kernel.org/r/YE4snvoW1SuwcXAn@localhost.localdomain Reviewed-by: Himanshu Madhani Signed-off-by: Alexey Dobriyan Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin