user/sven/linux.git/drivers/scsi, branch v5.9.8

scsi: ibmvscsi: Fix potential race after loss of transport

2020-11-10T11:39:06Z

[ Upstream commit 665e0224a3d76f36da40bd9012270fa629aa42ed ] After a loss of transport due to an adapter migration or crash/disconnect from the host partner there is a tiny window where we can race adjusting the request_limit of the adapter. The request limit is atomically increased/decreased to track the number of inflight requests against the allowed limit of our VIOS partner. After a transport loss we set the request_limit to zero to reflect this state. However, there is a window where the adapter may attempt to queue a command because the transport loss event hasn't been fully processed yet and request_limit is still greater than zero. The hypercall to send the event will fail and the error path will increment the request_limit as a result. If the adapter processes the transport event prior to this increment the request_limit becomes out of sync with the adapter state and can result in SCSI commands being submitted on the now reset connection prior to an SRP Login resulting in a protocol violation. Fix this race by protecting request_limit with the host lock when changing the value via atomic_set() to indicate no transport. Link: https://lore.kernel.org/r/20201025001355.4527-1-tyreld@linux.ibm.com Signed-off-by: Tyrel Datwyler Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: core: Don't start concurrent async scan on same host

2020-11-10T11:39:05Z

[ Upstream commit 831e3405c2a344018a18fcc2665acc5a38c3a707 ] The current scanning mechanism is supposed to fall back to a synchronous host scan if an asynchronous scan is in progress. However, this rule isn't strictly respected, scsi_prep_async_scan() doesn't hold scan_mutex when checking shost->async_scan. When scsi_scan_host() is called concurrently, two async scans on same host can be started and a hang in do_scan_async() is observed. Fixes this issue by checking & setting shost->async_scan atomically with shost->scan_mutex. Link: https://lore.kernel.org/r/20201010032539.426615-1-ming.lei@redhat.com Cc: Christoph Hellwig Cc: Ewan D. Milne Cc: Hannes Reinecke Cc: Bart Van Assche Reviewed-by: Lee Duncan Reviewed-by: Bart Van Assche Signed-off-by: Ming Lei Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: qla2xxx: Fix crash on session cleanup with unload

2020-11-05T10:51:35Z

commit 50457dab670f396557e60c07f086358460876353 upstream. On unload, session cleanup prematurely gave the signal for driver unload path to advance. Link: https://lore.kernel.org/r/20200929102152.32278-6-njavali@marvell.com Fixes: 726b85487067 ("qla2xxx: Add framework for async fabric discovery") Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani Signed-off-by: Quinn Tran Signed-off-by: Nilesh Javali Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

scsi: qla2xxx: Fix reset of MPI firmware

2020-11-05T10:51:35Z

commit 3e6efab865ac943f4ec43913eb665695737112b0 upstream. Normally, the MPI firmware is reset when an MPI dump is collected. If an unsaved MPI dump exists in the driver, though, an alternate mechanism is used. This mechanism, which was not fully correct, is not recommended and instead an MPI dump template walk is suggested to perform the MPI reset. To allow for the MPI dump template walk, extra space is reserved in the MPI dump buffer which gets used only when there is already an MPI dump in place. Link: https://lore.kernel.org/r/20200929102152.32278-5-njavali@marvell.com Fixes: cbb01c2f2f63 ("scsi: qla2xxx: Fix MPI failure AEN (8200) handling") Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani Signed-off-by: Arun Easi Signed-off-by: Nilesh Javali Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

scsi: qla2xxx: Fix MPI reset needed message

2020-11-05T10:51:35Z

commit 7a6cdbd5e87515ebf6231b762ad903c7cff87b9c upstream. When printing the message: "MPI Heartbeat stop. MPI reset is not needed.." ..the wrong register was checked leading to always printing that MPI reset is not needed, even when it is needed. Fix the MPI reset message. Link: https://lore.kernel.org/r/20200929102152.32278-4-njavali@marvell.com Fixes: cbb01c2f2f63 ("scsi: qla2xxx: Fix MPI failure AEN (8200) handling") Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani Signed-off-by: Arun Easi Signed-off-by: Nilesh Javali Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

scsi: core: Clean up allocation and freeing of sgtables

2020-11-05T10:51:27Z

[ Upstream commit 7007e9dd56767a95de0947b3f7599bcc2f21687f ] Rename scsi_init_io() to scsi_alloc_sgtables(), and ensure callers call scsi_free_sgtables() to cleanup failures close to scsi_init_io() instead of leaking it down the generic I/O submission path. Link: https://lore.kernel.org/r/20201005084130.143273-9-hch@lst.de Reviewed-by: Hannes Reinecke Signed-off-by: Christoph Hellwig Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: ufs: ufs-qcom: Fix race conditions caused by ufs_qcom_testbus_config()

2020-10-29T09:12:20Z

[ Upstream commit 89dd87acd40a44de8ff3358138aedf8f73f4efc6 ] If ufs_qcom_dump_dbg_regs() calls ufs_qcom_testbus_config() from ufshcd_suspend/resume and/or clk gate/ungate context, pm_runtime_get_sync() and ufshcd_hold() will cause a race condition. Fix this by removing the unnecessary calls of pm_runtime_get_sync() and ufshcd_hold(). Link: https://lore.kernel.org/r/1596975355-39813-3-git-send-email-cang@codeaurora.org Reviewed-by: Hongwu Su Reviewed-by: Avri Altman Reviewed-by: Bean Huo Reviewed-by: Asutosh Das Signed-off-by: Can Guo Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: smartpqi: Avoid crashing kernel for controller issues

2020-10-29T09:12:20Z

[ Upstream commit 9e68cccc8ef7206f0bccd590378d0dca8f9b4f57 ] Eliminate kernel panics when getting invalid responses from controller. Take controller offline instead of causing kernel panics. Link: https://lore.kernel.org/r/159622929306.30579.16523318707596752828.stgit@brunhilda Reviewed-by: Scott Teel Reviewed-by: Scott Benesh Reviewed-by: Prasad Munirathnam Reviewed-by: Martin Wilck Signed-off-by: Kevin Barnett Signed-off-by: Don Brace Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: qedi: Fix list_del corruption while removing active I/O

2020-10-29T09:12:18Z

[ Upstream commit 28b35d17f9f8573d4646dd8df08917a4076a6b63 ] While aborting the I/O, the firmware cleanup task timed out and driver deleted the I/O from active command list. Some time later the firmware sent the cleanup task response and driver again deleted the I/O from active command list causing firmware to send completion for non-existent I/O and list_del corruption of active command list. Add fix to check if I/O is present before deleting it from the active command list to ensure firmware sends valid I/O completion and protect against list_del corruption. Link: https://lore.kernel.org/r/20200908095657.26821-4-mrangankar@marvell.com Signed-off-by: Nilesh Javali Signed-off-by: Manish Rangankar Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: qedi: Protect active command list to avoid list corruption

2020-10-29T09:12:18Z

[ Upstream commit c0650e28448d606c84f76c34333dba30f61de993 ] Protect active command list for non-I/O commands like login response, logout response, text response, and recovery cleanup of active list to avoid list corruption. Link: https://lore.kernel.org/r/20200908095657.26821-5-mrangankar@marvell.com Signed-off-by: Nilesh Javali Signed-off-by: Manish Rangankar Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin