user/sven/linux.git/drivers/sh/Makefile, branch v5.7

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

sh: intc: Confine SH_INTC to platforms that need it

2014-08-22T03:28:16Z

Currently the sh-intc driver is compiled on all SuperH and non-multiplatform SH-Mobile platforms, while it's only used on a limited number of platforms: - SuperH: SH2(A), SH3(A), SH4(A)(L) (all but SH5) - ARM: sh7372, sh73a0 Drop the "default y" on SH_INTC, make all CPU platforms that use it select it, and protect all sub-options by "if SH_INTC" to fix this. Signed-off-by: Geert Uytterhoeven Acked-by: Magnus Damm Signed-off-by: Simon Horman

drivers: sh: compile drivers/sh/pm_runtime.c if ARCH_SHMOBILE_MULTI

2014-05-12T07:05:01Z

If the kernel is built to support multi-ARM configuration with shmobile support built in, then drivers/sh is not built. This contains the PM runtime code in drivers/sh/pm_runtime.c, which implicitly enables the module clocks for all devices, and thus is quite essential. Without this, the state of clocks depends on implicit reset state, or on the bootloader. If ARCH_SHMOBILE_MULTI then build the drivers/sh directory, but ensure that bits that may conflict (drivers/sh/clk if the common clock framework is enabled) or are not used (drivers/sh/intc), are not built. Also, only enable the PM runtime code when actually running on a shmobile SoCs that needs it. ARCH_SHMOBILE_MULTI was added a while ago by commit efacfce5f8a523457e9419a25d52fe39db00b26a ("ARM: shmobile: Introduce ARCH_SHMOBILE_MULTI"), but drivers/sh was compiled for both ARCH_SHMOBILE_LEGACY and ARCH_SHMOBILE_MULTI until commit bf98c1eac1d4a6bcf00532e4fa41d8126cd6c187 ("ARM: Rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY"). Inspired by a patch from Ben Dooks . Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman

sh-pfc: Move driver from drivers/sh/ to drivers/pinctrl/

2013-01-25T00:24:25Z

Signed-off-by: Laurent Pinchart Acked-by: Paul Mundt Acked-by: Linus Walleij Signed-off-by: Simon Horman

sh: pfc: Shuffle PFC support core.

2012-07-10T02:49:30Z

This follows the intc/clk changes and shuffles the PFC support code under its own directory. This will facilitate better code sharing, and allow us to trim down the exported interface by quite a margin. Signed-off-by: Paul Mundt

sh: pfc: Make gpio chip support optional where possible.

2012-06-20T09:17:56Z

This implements some Kconfig knobs for ensuring that the PFC gpio chip can be disabled or built as a module in the cases where it's optional, or forcibly enabled in cases where it's not. Signed-off-by: Paul Mundt

sh: pfc: Split out gpio chip support.

2012-06-20T08:29:04Z

This implements a bit of rework for the PFC code, making the core itself slightly more pluggable and moving out the gpio chip handling completely. The API is preserved in such a way that platforms that depend on it for early configuration are still able to do so, while making it possible to migrate to alternate interfaces going forward. This is the first step of chainsawing necessary to support the pinctrl API, with the eventual goal being able to decouple pin function state from the gpio API while retaining gpio chip tie-in for gpio pin functions only, relying on the pinctrl/pinmux API for non-gpio function demux. Signed-off-by: Paul Mundt

sh: also without PM_RUNTIME pm_runtime.o must be built

2012-01-12T03:25:51Z

When CONFIG_PM_RUNTIME is off, drivers/sh/pm_runtime.o still has to be built on sh platforms, because then it provides means to statically switch on device PM clocks. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Paul Mundt

sh: Kill off remaining private runtime PM bits.

2011-11-18T07:05:52Z

This kills of the now unused runtime PM stub in favour of the generic one. Signed-off-by: Paul Mundt

sh: sh7723: use runtime PM implementation, common with arm/mach-shmobile

2011-11-17T19:12:29Z

Switch sh7723 to a runtime PM implementation, common with ARM-based sh-mobile platforms. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Paul Mundt