user/sven/linux.git/drivers/soc, branch v5.4.113

soc/fsl: qbman: fix conflicting alignment attributes

2021-04-14T06:24:16Z

[ Upstream commit 040f31196e8b2609613f399793b9225271b79471 ] When building with W=1, gcc points out that the __packed attribute on struct qm_eqcr_entry conflicts with the 8-byte alignment attribute on struct qm_fd inside it: drivers/soc/fsl/qbman/qman.c:189:1: error: alignment 1 of 'struct qm_eqcr_entry' is less than 8 [-Werror=packed-not-aligned] I assume that the alignment attribute is the correct one, and that qm_eqcr_entry cannot actually be unaligned in memory, so add the same alignment on the outer struct. Fixes: c535e923bb97 ("soc/fsl: Introduce DPAA 1.x QMan device driver") Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20210323131530.2619900-1-arnd@kernel.org' Signed-off-by: Arnd Bergmann Signed-off-by: Sasha Levin

soc: aspeed: snoop: Add clock control logic

2021-03-04T09:26:16Z

[ Upstream commit 3f94cf15583be554df7aaa651b8ff8e1b68fbe51 ] If LPC SNOOP driver is registered ahead of lpc-ctrl module, LPC SNOOP block will be enabled without heart beating of LCLK until lpc-ctrl enables the LCLK. This issue causes improper handling on host interrupts when the host sends interrupt in that time frame. Then kernel eventually forcibly disables the interrupt with dumping stack and printing a 'nobody cared this irq' message out. To prevent this issue, all LPC sub-nodes should enable LCLK individually so this patch adds clock control logic into the LPC SNOOP driver. Fixes: 3772e5da4454 ("drivers/misc: Aspeed LPC snoop output using misc chardev") Signed-off-by: Jae Hyun Yoo Signed-off-by: Vernon Mauery Signed-off-by: John Wang Reviewed-by: Joel Stanley Link: https://lore.kernel.org/r/20201208091748.1920-1-wangzhiqiang.bj@bytedance.com Signed-off-by: Joel Stanley Signed-off-by: Sasha Levin

drivers: soc: atmel: add null entry at the end of at91_soc_allowed_list[]

2021-02-03T22:25:57Z

commit 680896556805d3ad3fa47f6002b87b3041a45ac2 upstream. of_match_node() calls __of_match_node() which loops though the entries of matches array. It stops when condition: (matches->name[0] || matches->type[0] || matches->compatible[0]) is false. Thus, add a null entry at the end of at91_soc_allowed_list[] array. Fixes: caab13b49604 ("drivers: soc: atmel: Avoid calling at91_soc_init on non AT91 SoCs") Cc: stable@vger.kernel.org #4.12+ Signed-off-by: Claudiu Beznea Signed-off-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman

drivers: soc: atmel: Avoid calling at91_soc_init on non AT91 SoCs

2021-02-03T22:25:57Z

commit caab13b4960416b9fee83169a758eb0f31e65109 upstream. Since at91_soc_init is called unconditionally from atmel_soc_device_init, we get the following warning on all non AT91 SoCs: " AT91: Could not find identification node" Fix the same by filtering with allowed AT91 SoC list. Cc: Nicolas Ferre Cc: Alexandre Belloni Cc: Ludovic Desroches Cc: stable@vger.kernel.org #4.12+ Signed-off-by: Sudeep Holla Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20201211135846.1334322-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman

soc: qcom: smp2p: Safely acquire spinlock without IRQs

2020-12-30T10:51:43Z

commit fc3e62e25c3896855b7c3d72df19ca6be3459c9f upstream. smp2p_update_bits() should disable interrupts when it acquires its spinlock. This is important because without the _irqsave, a priority inversion can occur. This function is called both with interrupts enabled in qcom_q6v5_request_stop(), and with interrupts disabled in ipa_smp2p_panic_notifier(). IRQ handling of spinlocks should be consistent to avoid the panic notifier deadlocking because it's sitting on the thread that's already got the lock via _request_stop(). Found via lockdep. Cc: stable@vger.kernel.org Fixes: 50e99641413e7 ("soc: qcom: smp2p: Qualcomm Shared Memory Point to Point") Reviewed-by: Bjorn Andersson Reviewed-by: Stephen Boyd Signed-off-by: Evan Green Link: https://lore.kernel.org/r/20200929133040.RESEND.1.Ideabf6dcdfc577cf39ce3d95b0e4aa1ac8b38f0c@changeid Signed-off-by: Bjorn Andersson Signed-off-by: Greg Kroah-Hartman

soc: amlogic: canvas: add missing put_device() call in meson_canvas_get()

2020-12-30T10:51:15Z

[ Upstream commit 28f851e6afa858f182802e23ac60c3ed7d1c04a1 ] if of_find_device_by_node() succeed, meson_canvas_get() doesn't have a corresponding put_device(). Thus add put_device() to fix the exception handling for this function implementation. Fixes: 382f8be04551 ("soc: amlogic: canvas: Fix meson_canvas_get when probe failed") Signed-off-by: Yu Kuai Reviewed-by: Neil Armstrong Signed-off-by: Kevin Hilman Link: https://lore.kernel.org/r/20201117011322.522477-1-yukuai3@huawei.com Signed-off-by: Sasha Levin

drivers: soc: ti: knav_qmss_queue: Fix error return code in knav_queue_probe

2020-12-30T10:51:10Z

[ Upstream commit 4cba398f37f868f515ff12868418dc28574853a1 ] Fix to return the error code from of_get_child_by_name() instaed of 0 in knav_queue_probe(). Fixes: 41f93af900a20d1a0a ("soc: ti: add Keystone Navigator QMSS driver") Reported-by: Hulk Robot Signed-off-by: Zhihao Cheng Signed-off-by: Santosh Shilimkar Signed-off-by: Sasha Levin

soc: ti: Fix reference imbalance in knav_dma_probe

2020-12-30T10:51:10Z

[ Upstream commit b4fa73358c306d747a2200aec6f7acb97e5750e6 ] The patch fix two reference leak. 1) pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to call put operation will result in reference leak. 2) The pm_runtime_enable will increase power disable depth. Thus a pairing decrement is needed on the error handling path to keep it balanced. We fix it by: 1) adding call pm_runtime_put_noidle or pm_runtime_put_sync in error handling. 2) adding pm_runtime_disable in error handling, to keep usage counter and disable depth balanced. Fixes: 88139ed030583 ("soc: ti: add Keystone Navigator DMA support") Signed-off-by: Zhang Qilong Signed-off-by: Santosh Shilimkar Signed-off-by: Sasha Levin

soc: ti: knav_qmss: fix reference leak in knav_queue_probe

2020-12-30T10:51:10Z

[ Upstream commit ec8684847d8062496c4619bc3fcff31c19d56847 ] pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to pm_runtime_put_noidle will result in reference leak in knav_queue_probe, so we should fix it. Fixes: 41f93af900a20 ("soc: ti: add Keystone Navigator QMSS driver") Signed-off-by: Zhang Qilong Signed-off-by: Santosh Shilimkar Signed-off-by: Sasha Levin

soc: qcom: geni: More properly switch to DMA mode

2020-12-30T10:51:01Z

[ Upstream commit 4b6ea87be44ef34732846fc71e44c41125f0c4fa ] On geni-i2c transfers using DMA, it was seen that if you program the command (I2C_READ) before calling geni_se_rx_dma_prep() that it could cause interrupts to fire. If we get unlucky, these interrupts can just keep firing (and not be handled) blocking further progress and hanging the system. In commit 02b9aec59243 ("i2c: i2c-qcom-geni: Fix DMA transfer race") we avoided that by making sure we didn't program the command until after geni_se_rx_dma_prep() was called. While that avoided the problems, it also turns out to be invalid. At least in the TX case we started seeing sporadic corrupted transfers. This is easily seen by adding an msleep() between the DMA prep and the writing of the command, which makes the problem worse. That means we need to revert that commit and find another way to fix the bogus IRQs. Specifically, after reverting commit 02b9aec59243 ("i2c: i2c-qcom-geni: Fix DMA transfer race"), I put some traces in. I found that the when the interrupts were firing like crazy: - "m_stat" had bits for M_RX_IRQ_EN, M_RX_FIFO_WATERMARK_EN set. - "dma" was set. Further debugging showed that I could make the problem happen more reliably by adding an "msleep(1)" any time after geni_se_setup_m_cmd() ran up until geni_se_rx_dma_prep() programmed the length. A rather simple fix is to change geni_se_select_dma_mode() so it's a true inverse of geni_se_select_fifo_mode() and disables all the FIFO related interrupts. Now the problematic interrupts can't fire and we can program things in the correct order without worrying. As part of this, let's also change the writel_relaxed() in the prepare function to a writel() so that our DMA is guaranteed to be prepared now that we can't rely on geni_se_setup_m_cmd()'s writel(). NOTE: the only current user of GENI_SE_DMA in mainline is i2c. Fixes: 37692de5d523 ("i2c: i2c-qcom-geni: Add bus driver for the Qualcomm GENI I2C controller") Fixes: 02b9aec59243 ("i2c: i2c-qcom-geni: Fix DMA transfer race") Signed-off-by: Douglas Anderson Reviewed-by: Stephen Boyd Reviewed-by: Akash Asthana Tested-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20201013142448.v2.1.Ifdb1b69fa3367b81118e16e9e4e63299980ca798@changeid Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin