user/sven/linux.git/drivers/soc, branch v5.4.150

soc: aspeed: p2a-ctrl: Fix boundary check for mmap

2021-09-22T10:26:20Z

commit 8b07e990fb254fcbaa919616ac77f981cb48c73d upstream. The check mixes pages (vm_pgoff) with bytes (vm_start, vm_end) on one side of the comparison, and uses resource address (rather than just the resource size) on the other side of the comparison. This can allow malicious userspace to easily bypass the boundary check and map pages that are located outside memory-region reserved by the driver. Fixes: 01c60dcea9f7 ("drivers/misc: Add Aspeed P2A control driver") Cc: stable@vger.kernel.org Signed-off-by: Iwona Winiarska Reviewed-by: Andrew Jeffery Tested-by: Andrew Jeffery Reviewed-by: Joel Stanley Signed-off-by: Joel Stanley Signed-off-by: Greg Kroah-Hartman

soc: aspeed: lpc-ctrl: Fix boundary check for mmap

2021-09-22T10:26:20Z

commit b49a0e69a7b1a68c8d3f64097d06dabb770fec96 upstream. The check mixes pages (vm_pgoff) with bytes (vm_start, vm_end) on one side of the comparison, and uses resource address (rather than just the resource size) on the other side of the comparison. This can allow malicious userspace to easily bypass the boundary check and map pages that are located outside memory-region reserved by the driver. Fixes: 6c4e97678501 ("drivers/misc: Add Aspeed LPC control driver") Cc: stable@vger.kernel.org Signed-off-by: Iwona Winiarska Reviewed-by: Andrew Jeffery Tested-by: Andrew Jeffery Reviewed-by: Joel Stanley Signed-off-by: Joel Stanley Signed-off-by: Greg Kroah-Hartman

soc: qcom: aoss: Fix the out of bound usage of cooling_devs

2021-09-22T10:26:20Z

commit a89f355e469dcda129c2522be4fdba00c1c74c83 upstream. In "qmp_cooling_devices_register", the count value is initially QMP_NUM_COOLING_RESOURCES, which is 2. Based on the initial count value, the memory for cooling_devs is allocated. Then while calling the "qmp_cooling_device_add" function, count value is post-incremented for each child node. This makes the out of bound access to the cooling_dev array. Fix it by passing the QMP_NUM_COOLING_RESOURCES definition to devm_kzalloc() and initializing the count to 0. While at it, let's also free the memory allocated to cooling_dev if no cooling device is found in DT and during unroll phase. Cc: stable@vger.kernel.org # 5.4 Fixes: 05589b30b21a ("soc: qcom: Extend AOSS QMP driver to support resources that are used to wake up the SoC.") Signed-off-by: Manivannan Sadhasivam Link: https://lore.kernel.org/r/20210629153249.73428-1-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson Signed-off-by: Greg Kroah-Hartman

soc: qcom: smsm: Fix missed interrupts if state changes while masked

2021-09-15T07:47:33Z

[ Upstream commit e3d4571955050736bbf3eda0a9538a09d9fcfce8 ] The SMSM driver detects interrupt edges by tracking the last state it has seen (and has triggered the interrupt handler for). This works fine, but only if the interrupt does not change state while masked. For example, if an interrupt is unmasked while the state is HIGH, the stored last_value for that interrupt might still be LOW. Then, when the remote processor triggers smsm_intr() we assume that nothing has changed, even though the state might have changed from HIGH to LOW. Attempt to fix this by checking the current remote state before unmasking an IRQ. Use atomic operations to avoid the interrupt handler from interfering with the unmask function. This fixes modem crashes in some edge cases with the BAM-DMUX driver. Specifically, the BAM-DMUX interrupt handler is not called for the HIGH -> LOW smsm state transition if the BAM-DMUX driver is loaded (and therefore unmasks the interrupt) after the modem was already started: qcom-q6v5-mss 4080000.remoteproc: fatal error received: a2_task.c:3188: Assert FALSE failed: A2 DL PER deadlock timer expired waiting for Apps ACK Fixes: c97c4090ff72 ("soc: qcom: smsm: Add driver for Qualcomm SMSM") Signed-off-by: Stephan Gerhold Link: https://lore.kernel.org/r/20210712135703.324748-2-stephan@gerhold.net Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

soc: qcom: rpmhpd: Use corner in power_off

2021-09-15T07:47:31Z

[ Upstream commit d43b3a989bc8c06fd4bbb69a7500d180db2d68e8 ] rpmhpd_aggregate_corner() takes a corner as parameter, but in rpmhpd_power_off() the code requests the level of the first corner instead. In all (known) current cases the first corner has level 0, so this change should be a nop, but in case that there's a power domain with a non-zero lowest level this makes sure that rpmhpd_power_off() actually requests the lowest level - which is the closest to "power off" we can get. While touching the code, also skip the unnecessary zero-initialization of "ret". Fixes: 279b7e8a62cc ("soc: qcom: rpmhpd: Add RPMh power domain driver") Reviewed-by: Rajendra Nayak Reviewed-by: Stephen Boyd Reviewed-by: Sibi Sankar Tested-by: Sibi Sankar Link: https://lore.kernel.org/r/20210703005416.2668319-2-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

soc: rockchip: ROCKCHIP_GRF should not default to y, unconditionally

2021-09-15T07:47:30Z

[ Upstream commit 2a1c55d4762dd34a8b0f2e36fb01b7b16b60735b ] Merely enabling CONFIG_COMPILE_TEST should not enable additional code. To fix this, restrict the automatic enabling of ROCKCHIP_GRF to ARCH_ROCKCHIP, and ask the user in case of compile-testing. Fixes: 4c58063d4258f6be ("soc: rockchip: add driver handling grf setup") Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20210208143855.418374-1-geert+renesas@glider.be Signed-off-by: Heiko Stuebner Signed-off-by: Sasha Levin

soc: ixp4xx/qmgr: fix invalid __iomem access

2021-08-12T11:21:04Z

commit a8eee86317f11e97990d755d4615c1c0db203d08 upstream. Sparse reports a compile time warning when dereferencing an __iomem pointer: drivers/soc/ixp4xx/ixp4xx-qmgr.c:149:37: warning: dereference of noderef expression drivers/soc/ixp4xx/ixp4xx-qmgr.c:153:40: warning: dereference of noderef expression drivers/soc/ixp4xx/ixp4xx-qmgr.c:154:40: warning: dereference of noderef expression drivers/soc/ixp4xx/ixp4xx-qmgr.c:174:38: warning: dereference of noderef expression drivers/soc/ixp4xx/ixp4xx-qmgr.c:174:44: warning: dereference of noderef expression Use __raw_readl() here for consistency with the rest of the file. This should really get converted to some proper accessor, as the __raw functions are not meant to be used in drivers, but the driver has used these since the start, so for the moment, let's only fix the warning. Reported-by: kernel test robot Fixes: d4c9e9fc9751 ("IXP42x: Add QMgr support for IXP425 rev. A0 processors.") Signed-off-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman

soc: ixp4xx: fix printing resources

2021-08-12T11:21:04Z

commit 8861452b2097bb0b5d0081a1c137fb3870b0a31f upstream. When compile-testing with 64-bit resource_size_t, gcc reports an invalid printk format string: In file included from include/linux/dma-mapping.h:7, from drivers/soc/ixp4xx/ixp4xx-npe.c:15: drivers/soc/ixp4xx/ixp4xx-npe.c: In function 'ixp4xx_npe_probe': drivers/soc/ixp4xx/ixp4xx-npe.c:694:18: error: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=] dev_info(dev, "NPE%d at 0x%08x-0x%08x not available\n", Use the special %pR format string to print the resources. Fixes: 0b458d7b10f8 ("soc: ixp4xx: npe: Pass addresses as resources") Signed-off-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman

soc/tegra: fuse: Fix Tegra234-only builds

2021-07-25T12:35:12Z

[ Upstream commit e2d0ee225e49a5553986f3138dd2803852a31fd5 ] The tegra30_fuse_read() symbol is used on Tegra234, so make sure it's available. Signed-off-by: Thierry Reding Signed-off-by: Sasha Levin

soc: aspeed: fix a ternary sign expansion bug

2021-05-14T07:44:23Z

[ Upstream commit 5ffa828534036348fa90fb3079ccc0972d202c4a ] The intent here was to return negative error codes but it actually returns positive values. The problem is that type promotion with ternary operations is quite complicated. "ret" is an int. "copied" is a u32. And the snoop_file_read() function returns long. What happens is that "ret" is cast to u32 and becomes positive then it's cast to long and it's still positive. Fix this by removing the ternary so that "ret" is type promoted directly to long. Fixes: 3772e5da4454 ("drivers/misc: Aspeed LPC snoop output using misc chardev") Signed-off-by: Dan Carpenter Signed-off-by: Joel Stanley Reviewed-by: Patrick Venture Link: https://lore.kernel.org/r/YIE90PSXsMTa2Y8n@mwanda Link: https://lore.kernel.org/r/20210423000919.1249474-1-joel@jms.id.au' Signed-off-by: Arnd Bergmann Signed-off-by: Sasha Levin