user/sven/linux.git/drivers/soc, branch v5.4.42

drivers: soc: xilinx: fix firmware driver Kconfig dependency

2020-05-02T06:48:46Z

commit d0384eedcde21276ac51f57c641f875605024b32 upstream. The firmware driver is optional, but the power driver depends on it, which needs to be reflected in Kconfig to avoid link errors: aarch64-linux-ld: drivers/soc/xilinx/zynqmp_power.o: in function `zynqmp_pm_isr': zynqmp_power.c:(.text+0x284): undefined reference to `zynqmp_pm_invoke_fn' The firmware driver can probably be allowed for compile-testing as well, so it's best to drop the dependency on the ZYNQ platform here and allow building as long as the firmware code is built-in. Fixes: ab272643d723 ("drivers: soc: xilinx: Add ZynqMP PM driver") Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20200408155224.2070880-1-arnd@arndb.de Signed-off-by: Michal Simek Signed-off-by: Greg Kroah-Hartman

soc: imx: gpc: fix power up sequencing

2020-04-23T08:36:30Z

[ Upstream commit e0ea2d11f8a08ba7066ff897e16c5217215d1e68 ] Currently we wait only until the PGC inverts the isolation setting before disabling the peripheral clocks. This doesn't ensure that the reset is properly propagated through the peripheral devices in the power domain. Wait until the PGC signals that the power up request is done and wait a bit for resets to propagate before disabling the clocks. Signed-off-by: Lucas Stach Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin

soc: fsl: dpio: register dpio irq handlers after dpio create

2020-04-17T08:49:57Z

[ Upstream commit fe8fe7723a3a824790bda681b40efd767e2251a7 ] The dpio irqs must be registered when you can actually receive interrupts, ie when the dpios are created. Kernel goes through NULL pointer dereference errors followed by kernel panic [1] because the dpio irqs are enabled before the dpio is created. [1] Unable to handle kernel NULL pointer dereference at virtual address 0040 fsl_mc_dpio dpio.14: probed fsl_mc_dpio dpio.13: Adding to iommu group 11 ISV = 0, ISS = 0x00000004 Unable to handle kernel NULL pointer dereference at virtual address 0040 Mem abort info: ESR = 0x96000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 [0000000000000040] user address but active_mm is swapper Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 2 PID: 151 Comm: kworker/2:1 Not tainted 5.6.0-rc4-next-20200304 #1 Hardware name: NXP Layerscape LX2160ARDB (DT) Workqueue: events deferred_probe_work_func pstate: 00000085 (nzcv daIf -PAN -UAO) pc : dpaa2_io_irq+0x18/0xe0 lr : dpio_irq_handler+0x1c/0x28 sp : ffff800010013e20 x29: ffff800010013e20 x28: ffff0026d9b4c140 x27: ffffa1d38a142018 x26: ffff0026d2953400 x25: ffffa1d38a142018 x24: ffffa1d38a7ba1d8 x23: ffff800010013f24 x22: 0000000000000000 x21: 0000000000000072 x20: ffff0026d2953400 x19: ffff0026d2a68b80 x18: 0000000000000001 x17: 000000002fb37f3d x16: 0000000035eafadd x15: ffff0026d9b4c5b8 x14: ffffffffffffffff x13: ff00000000000000 x12: 0000000000000038 x11: 0101010101010101 x10: 0000000000000040 x9 : ffffa1d388db11e4 x8 : ffffa1d38a7e40f0 x7 : ffff0026da414f38 x6 : 0000000000000000 x5 : ffff0026da414d80 x4 : ffff5e5353d0c000 x3 : ffff800010013f60 x2 : ffffa1d388db11c8 x1 : ffff0026d2a67c00 x0 : 0000000000000000 Call trace: dpaa2_io_irq+0x18/0xe0 dpio_irq_handler+0x1c/0x28 __handle_irq_event_percpu+0x78/0x2c0 handle_irq_event_percpu+0x38/0x90 handle_irq_event+0x4c/0xd0 handle_fasteoi_irq+0xbc/0x168 generic_handle_irq+0x2c/0x40 __handle_domain_irq+0x68/0xc0 gic_handle_irq+0x64/0x150 el1_irq+0xb8/0x180 _raw_spin_unlock_irqrestore+0x14/0x48 irq_set_affinity_hint+0x6c/0xa0 dpaa2_dpio_probe+0x2a4/0x518 fsl_mc_driver_probe+0x28/0x70 really_probe+0xdc/0x320 driver_probe_device+0x5c/0xf0 __device_attach_driver+0x88/0xc0 bus_for_each_drv+0x7c/0xc8 __device_attach+0xe4/0x140 device_initial_probe+0x18/0x20 bus_probe_device+0x98/0xa0 device_add+0x41c/0x758 fsl_mc_device_add+0x184/0x530 dprc_scan_objects+0x280/0x370 dprc_probe+0x124/0x3b0 fsl_mc_driver_probe+0x28/0x70 really_probe+0xdc/0x320 driver_probe_device+0x5c/0xf0 __device_attach_driver+0x88/0xc0 bus_for_each_drv+0x7c/0xc8 __device_attach+0xe4/0x140 device_initial_probe+0x18/0x20 bus_probe_device+0x98/0xa0 deferred_probe_work_func+0x74/0xa8 process_one_work+0x1c8/0x470 worker_thread+0x1f8/0x428 kthread+0x124/0x128 ret_from_fork+0x10/0x18 Code: a9bc7bfd 910003fd a9025bf5 a90363f7 (f9402015) ---[ end trace 38298e1a29e7a570 ]--- Kernel panic - not syncing: Fatal exception in interrupt SMP: stopping secondary CPUs Mem abort info: ESR = 0x96000004 CM = 0, WnR = 0 EC = 0x25: DABT (current EL), IL = 32 bits [0000000000000040] user address but active_mm is swapper SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 [0000000000000040] user address but active_mm is swapper SMP: failed to stop secondary CPUs 0-2 Kernel Offset: 0x21d378600000 from 0xffff800010000000 PHYS_OFFSET: 0xffffe92180000000 CPU features: 0x10002,21806008 Memory Limit: none ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Signed-off-by: Laurentiu Tudor Signed-off-by: Grigore Popescu Signed-off-by: Li Yang Signed-off-by: Sasha Levin

soc: mediatek: knows_txdone needs to be set in Mediatek CMDQ helper

2020-04-08T07:08:44Z

commit ce35e21d82bcac8b3fd5128888f9e233f8444293 upstream. Mediatek CMDQ driver have a mechanism to do TXDONE_BY_ACK, so we should set knows_txdone. Fixes:576f1b4bc802 ("soc: mediatek: Add Mediatek CMDQ helper") Cc: stable@vger.kernel.org # v5.0+ Signed-off-by: Bibby Hsieh Reviewed-by: CK Hu Signed-off-by: Matthias Brugger Signed-off-by: Greg Kroah-Hartman

soc: imx-scu: Align imx sc msg structs to 4

2020-03-12T12:00:28Z

commit f10e58a5d20e1cf3a39a842da92c9dd0c3c23849 upstream. The imx SC api strongly assumes that messages are composed out of 4-bytes words but some of our message structs have odd sizeofs. This produces many oopses with CONFIG_KASAN=y. Fix by marking with __aligned(4). Fixes: 73feb4d0f8f1 ("soc: imx-scu: Add SoC UID(unique identifier) support") Signed-off-by: Leonard Crestez Signed-off-by: Shawn Guo Signed-off-by: Greg Kroah-Hartman

soc/tegra: fuse: Fix build with Tegra194 configuration

2020-03-05T15:43:39Z

[ Upstream commit 6f4ecbe284df5f22e386a640d9a4b32cede62030 ] If only Tegra194 support is enabled, the tegra30_fuse_read() and tegra30_fuse_init() function are not declared and cause a build failure. Add Tegra194 to the preprocessor guard to make sure these functions are available for Tegra194-only builds as well. Link: https://lore.kernel.org/r/20200203143114.3967295-1-thierry.reding@gmail.com Reported-by: kbuild test robot Signed-off-by: Thierry Reding Signed-off-by: Olof Johansson Signed-off-by: Sasha Levin

soc/tegra: fuse: Correct straps' address for older Tegra124 device trees

2020-02-24T07:36:45Z

[ Upstream commit 2d9ea1934f8ef0dfb862d103389562cc28b4fc03 ] Trying to read out Chip ID before APBMISC registers are mapped won't succeed, in a result Tegra124 gets a wrong address for the HW straps register if machine uses an old outdated device tree. Fixes: 297c4f3dcbff ("soc/tegra: fuse: Restrict legacy code to 32-bit ARM") Signed-off-by: Dmitry Osipenko Signed-off-by: Thierry Reding Signed-off-by: Sasha Levin

soc: qcom: rpmhpd: Set 'active_only' for active only power domains

2020-02-14T21:34:16Z

commit 5d0d4d42bed0090d3139e7c5ca1587d76d48add6 upstream. The 'active_only' attribute was accidentally never set to true for any power domains meaning that all the code handling this attribute was dead. NOTE that the RPM power domain code (as opposed to the RPMh one) gets this right. Acked-by: Rajendra Nayak Reviewed-by: Stephen Boyd Fixes: 279b7e8a62cc ("soc: qcom: rpmhpd: Add RPMh power domain driver") Signed-off-by: Douglas Anderson Link: https://lore.kernel.org/r/20190214173633.211000-1-dianders@chromium.org Signed-off-by: Bjorn Andersson Signed-off-by: Greg Kroah-Hartman

soc: ti: wkup_m3_ipc: Fix race condition with rproc_boot

2020-02-05T21:22:43Z

[ Upstream commit 03729cfa0d543bc996bf959e762ec999afc8f3d2 ] Any user of wkup_m3_ipc calls wkup_m3_ipc_get to get a handle and this checks the value of the static variable m3_ipc_state to see if the wkup_m3 is ready. Currently this is populated during probe before rproc_boot has been called, meaning there is a window of time that wkup_m3_ipc_get can return a valid handle but the wkup_m3 itself is not ready, leading to invalid IPC calls to the wkup_m3 and system instability. To avoid this, move the population of the m3_ipc_state variable until after rproc_boot has succeeded to guarantee a valid and usable handle is always returned. Reported-by: Suman Anna Signed-off-by: Dave Gerlach Acked-by: Santosh Shilimkar Signed-off-by: Tony Lindgren Signed-off-by: Sasha Levin

soc: aspeed: Fix snoop_file_poll()'s return type

2020-01-26T09:01:02Z

commit a4e55ccd4392e70f296d12e81b93c6ca96ee21d5 upstream. snoop_file_poll() is defined as returning 'unsigned int' but the .poll method is declared as returning '__poll_t', a bitwise type. Fix this by using the proper return type and using the EPOLL constants instead of the POLL ones, as required for __poll_t. Link: https://lore.kernel.org/r/20191121051851.268726-1-joel@jms.id.au Fixes: 3772e5da4454 ("drivers/misc: Aspeed LPC snoop output using misc chardev") Signed-off-by: Luc Van Oostenryck Reviewed-by: Joel Stanley Reviewed-by: Andrew Jeffery Signed-off-by: Joel Stanley Signed-off-by: Olof Johansson Signed-off-by: Greg Kroah-Hartman