user/sven/linux.git/drivers/spi, branch v4.19.269

spi: spi-imx: Fix spi_bus_clk if requested clock is higher than input clock

2022-12-08T10:18:32Z

[ Upstream commit db2d2dc9a0b58c6faefb6b002fdbed4f0362d1a4 ] In case the requested bus clock is higher than the input clock, the correct dividers (pre = 0, post = 0) are returned from mx51_ecspi_clkdiv(), but *fres is left uninitialized and therefore contains an arbitrary value. This causes trouble for the recently introduced PIO polling feature as the value in spi_imx->spi_bus_clk is used there to calculate for which transfers to enable PIO polling. Fix this by setting *fres even if no clock dividers are in use. This issue was observed on Kontron BL i.MX8MM with an SPI peripheral clock set to 50 MHz by default and a requested SPI bus clock of 80 MHz for the SPI NOR flash. With the fix applied the debug message from mx51_ecspi_clkdiv() now prints the following: spi_imx 30820000.spi: mx51_ecspi_clkdiv: fin: 50000000, fspi: 50000000, post: 0, pre: 0 Fixes: 6fd8b8503a0d ("spi: spi-imx: Fix out-of-order CS/SCLK operation at low speeds") Fixes: 07e759387788 ("spi: spi-imx: add PIO polling support") Cc: Marc Kleine-Budde Cc: David Jander Cc: Fabio Estevam Cc: Mark Brown Cc: Marek Vasut Cc: stable@vger.kernel.org Signed-off-by: Frieder Schrempf Tested-by: Fabio Estevam Acked-by: Marek Vasut Link: https://lore.kernel.org/r/20221115181002.2068270-1-frieder@fris.de Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

spi: stm32: fix stm32_spi_prepare_mbr() that halves spi clk for every run

2022-12-08T10:18:28Z

[ Upstream commit 62aa1a344b0904549f6de7af958e8a1136fd5228 ] When this driver is used with a driver that uses preallocated spi_transfer structs. The speed_hz is halved by every run. This results in: spi_stm32 44004000.spi: SPI transfer setup failed ads7846 spi0.0: SPI transfer failed: -22 Example when running with DIV_ROUND_UP(): - First run; speed_hz = 1000000, spi->clk_rate 125000000 div 125 -> mbrdiv = 7, cur_speed = 976562 - Second run; speed_hz = 976562 div 128,00007 (roundup to 129) -> mbrdiv = 8, cur_speed = 488281 - Third run; speed_hz = 488281 div 256,000131072067109 (roundup to 257) and then -EINVAL is returned. Use DIV_ROUND_CLOSEST to allow to round down and allow us to keep the set speed. Signed-off-by: Sean Nyekjaer Link: https://lore.kernel.org/r/20221103080043.3033414-1-sean@geanix.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

spi: s3c64xx: Fix large transfers with DMA

2022-10-26T11:19:26Z

[ Upstream commit 1224e29572f655facfcd850cf0f0a4784f36a903 ] The COUNT_VALUE in the PACKET_CNT register is 16-bit so the maximum value is 65535. Asking the driver to transfer a larger size currently leads to the DMA transfer timing out. Implement ->max_transfer_size() and have the core split the transfer as needed. Fixes: 230d42d422e7 ("spi: Add s3c64xx SPI Controller driver") Signed-off-by: Vincent Whitchurch Link: https://lore.kernel.org/r/20220927112117.77599-5-vincent.whitchurch@axis.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

spi/omap100k:Fix PM disable depth imbalance in omap1_spi100k_probe

2022-10-26T11:19:25Z

[ Upstream commit 29f65f2171c85a9633daa380df14009a365f42f2 ] The pm_runtime_enable will increase power disable depth. Thus a pairing decrement is needed on the error handling path to keep it balanced according to context. Fixes:db91841b58f9a ("spi/omap100k: Convert to runtime PM") Signed-off-by: Zhang Qilong Link: https://lore.kernel.org/r/20220924121310.78331-4-zhangqilong3@huawei.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

spi: qup: add missing clk_disable_unprepare on error in spi_qup_pm_resume_runtime()

2022-10-26T11:19:25Z

[ Upstream commit 494a22765ce479c9f8ad181c5d24cffda9f534bb ] Add the missing clk_disable_unprepare() before return from spi_qup_pm_resume_runtime() in the error handling case. Fixes: dae1a7700b34 (“spi: qup: Handle clocks in pm_runtime suspend and resume”) Signed-off-by: Xu Qiang Link: https://lore.kernel.org/r/20220825065324.68446-2-xuqiang36@huawei.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

spi: qup: add missing clk_disable_unprepare on error in spi_qup_resume()

2022-10-26T11:19:24Z

[ Upstream commit 70034320fdc597b8f58b4a43bb547f17c4c5557a ] Add the missing clk_disable_unprepare() before return from spi_qup_resume() in the error handling case. Fixes: 64ff247a978f (“spi: Add Qualcomm QUP SPI controller support”) Signed-off-by: Xu Qiang Link: https://lore.kernel.org/r/20220825065324.68446-1-xuqiang36@huawei.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

spi: img-spfi: Fix pm_runtime_get_sync() error checking

2022-06-14T14:59:20Z

[ Upstream commit cc470d55343056d6b2a5c32e10e0aad06f324078 ] If the device is already in a runtime PM enabled state pm_runtime_get_sync() will return 1, so a test for negative value should be used to check for errors. Fixes: deba25800a12b ("spi: Add driver for IMG SPFI controller") Signed-off-by: Zheng Yongjun Link: https://lore.kernel.org/r/20220422062641.10486-1-zhengyongjun3@huawei.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

spi: spi-ti-qspi: Fix return value handling of wait_for_completion_timeout

2022-06-14T14:59:19Z

[ Upstream commit 8b1ea69a63eb62f97cef63e6d816b64ed84e8760 ] wait_for_completion_timeout() returns unsigned long not int. It returns 0 if timed out, and positive if completed. The check for <= 0 is ambiguous and should be == 0 here indicating timeout which is the only error case. Fixes: 5720ec0a6d26 ("spi: spi-ti-qspi: Add DMA support for QSPI mmap read") Signed-off-by: Miaoqian Lin Link: https://lore.kernel.org/r/20220411111034.24447-1-linmq006@gmail.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

spi: bcm-qspi: fix MSPI only access with bcm_qspi_exec_mem_op()

2022-04-15T12:15:05Z

[ Upstream commit 2c7d1b281286c46049cd22b43435cecba560edde ] This fixes case where MSPI controller is used to access spi-nor flash and BSPI block is not present. Fixes: 5f195ee7d830 ("spi: bcm-qspi: Implement the spi_mem interface") Signed-off-by: Kamal Dasu Acked-by: Florian Fainelli Link: https://lore.kernel.org/r/20220328142442.7553-1-kdasu.kdev@gmail.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

spi: tegra20: Use of_device_get_match_data()

2022-04-15T12:14:54Z

[ Upstream commit c9839acfcbe20ce43d363c2a9d0772472d9921c0 ] Use of_device_get_match_data() to simplify the code. Reported-by: Zeal Robot Signed-off-by: Minghao Chi Link: https://lore.kernel.org/r/20220315023138.2118293-1-chi.minghao@zte.com.cn Signed-off-by: Mark Brown Signed-off-by: Sasha Levin