user/sven/linux.git/drivers/target/iscsi, branch v5.9.2

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2020-09-08T18:42:58Z

Pull SCSI fixes from James Bottomley: "Eleven fixes, mostly in drivers or minor fixes in driver related infrastructure libraries (target, libfc and libsas). Most of the bugs fixed only show up under rare circumstances, the exception being the endianness problem in qla2xxx which is used as a device on some sparc systems" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: mpt3sas: Don't call disable_irq from IRQ poll handler scsi: megaraid_sas: Don't call disable_irq from process IRQ poll scsi: target: iscsi: Fix hang in iscsit_access_np() when getting tpg->np_login_sem scsi: libsas: Set data_dir as DMA_NONE if libata marks qc as NODATA scsi: target: iscsi: Fix data digest calculation scsi: lpfc: Update lpfc version to 12.8.0.4 scsi: lpfc: Extend the RDF FPIN Registration descriptor for additional events scsi: lpfc: Fix FLOGI/PLOGI receive race condition in pt2pt discovery scsi: lpfc: Fix setting IRQ affinity with an empty CPU mask scsi: qla2xxx: Fix regression on sparc64 scsi: libfc: Fix for double free() scsi: pm8001: Fix memleak in pm8001_exec_internal_task_abort

scsi: target: iscsi: Fix hang in iscsit_access_np() when getting tpg->np_login_sem

2020-09-03T01:08:22Z

The iSCSI target login thread might get stuck with the following stack: cat /proc/`pidof iscsi_np`/stack [<0>] down_interruptible+0x42/0x50 [<0>] iscsit_access_np+0xe3/0x167 [<0>] iscsi_target_locate_portal+0x695/0x8ac [<0>] __iscsi_target_login_thread+0x855/0xb82 [<0>] iscsi_target_login_thread+0x2f/0x5a [<0>] kthread+0xfa/0x130 [<0>] ret_from_fork+0x1f/0x30 This can be reproduced via the following steps: 1. Initiator A tries to log in to iqn1-tpg1 on port 3260. After finishing PDU exchange in the login thread and before the negotiation is finished the the network link goes down. At this point A has not finished login and tpg->np_login_sem is held. 2. Initiator B tries to log in to iqn2-tpg1 on port 3260. After finishing PDU exchange in the login thread the target expects to process remaining login PDUs in workqueue context. 3. Initiator A' tries to log in to iqn1-tpg1 on port 3260 from a new socket. A' will wait for tpg->np_login_sem with np->np_login_timer loaded to wait for at most 15 seconds. The lock is held by A so A' eventually times out. 4. Before A' got timeout initiator B gets negotiation failed and calls iscsi_target_login_drop()->iscsi_target_login_sess_out(). The np->np_login_timer is canceled and initiator A' will hang forever. Because A' is now in the login thread, no new login requests can be serviced. Fix this by moving iscsi_stop_login_thread_timer() out of iscsi_target_login_sess_out(). Also remove iscsi_np parameter from iscsi_target_login_sess_out(). Link: https://lore.kernel.org/r/20200729130343.24976-1-houpu@bytedance.com Cc: stable@vger.kernel.org Reviewed-by: Mike Christie Signed-off-by: Hou Pu Signed-off-by: Martin K. Petersen

scsi: target: iscsi: Fix data digest calculation

2020-09-02T01:25:38Z

Current code does not consider 'page_off' in data digest calculation. To fix this, add a local variable 'first_sg' and set first_sg.offset to sg->offset + page_off. Link: https://lore.kernel.org/r/1598358910-3052-1-git-send-email-varun@chelsio.com Fixes: e48354ce078c ("iscsi-target: Add iSCSI fabric support for target v4.1") Cc: Reviewed-by: Mike Christie Signed-off-by: Varun Prakash Signed-off-by: Martin K. Petersen

treewide: Use fallthrough pseudo-keyword

2020-08-23T22:36:59Z

Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2020-08-14T23:01:59Z

Pull more SCSI updates from James Bottomley: "This is the set of patches which arrived too late to stabilise in -next for the first pull. It's really just an lpfc driver update and an assortment of minor fixes, all in drivers. The only core update is to the zone block device driver, which isn't the one most people use" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: lpfc: Update lpfc version to 12.8.0.3 scsi: lpfc: Fix LUN loss after cable pull scsi: lpfc: Fix validation of bsg reply lengths scsi: lpfc: Fix retry of PRLI when status indicates its unsupported scsi: lpfc: Fix oops when unloading driver while running mds diags scsi: lpfc: Fix RSCN timeout due to incorrect gidft counter scsi: lpfc: Fix no message shown for lpfc_hdw_queue out of range value scsi: lpfc: Fix FCoE speed reporting scsi: lpfc: Add missing misc_deregister() for lpfc_init() scsi: lpfc: nvmet: Avoid hang / use-after-free again when destroying targetport scsi: scsi_transport_sas: Add spaces around binary operator "|" scsi: sd_zbc: Improve zone revalidation scsi: libfc: Free skb in fc_disc_gpn_id_resp() for valid cases scsi: fcoe: Memory leak fix in fcoe_sysfs_fcf_del() scsi: target: Make iscsit_register_transport() return void

Merge branch 'akpm' (patches from Andrew)

2020-08-07T18:39:33Z

Merge misc updates from Andrew Morton: - a few MM hotfixes - kthread, tools, scripts, ntfs and ocfs2 - some of MM Subsystems affected by this patch series: kthread, tools, scripts, ntfs, ocfs2 and mm (hofixes, pagealloc, slab-generic, slab, slub, kcsan, debug, pagecache, gup, swap, shmem, memcg, pagemap, mremap, mincore, sparsemem, vmalloc, kasan, pagealloc, hugetlb and vmscan). * emailed patches from Andrew Morton : (162 commits) mm: vmscan: consistent update to pgrefill mm/vmscan.c: fix typo khugepaged: khugepaged_test_exit() check mmget_still_valid() khugepaged: retract_page_tables() remember to test exit khugepaged: collapse_pte_mapped_thp() protect the pmd lock khugepaged: collapse_pte_mapped_thp() flush the right range mm/hugetlb: fix calculation of adjust_range_if_pmd_sharing_possible mm: thp: replace HTTP links with HTTPS ones mm/page_alloc: fix memalloc_nocma_{save/restore} APIs mm/page_alloc.c: skip setting nodemask when we are in interrupt mm/page_alloc: fallbacks at most has 3 elements mm/page_alloc: silence a KASAN false positive mm/page_alloc.c: remove unnecessary end_bitidx for [set|get]_pfnblock_flags_mask() mm/page_alloc.c: simplify pageblock bitmap access mm/page_alloc.c: extract the common part in pfn_to_bitidx() mm/page_alloc.c: replace the definition of NR_MIGRATETYPE_BITS with PB_migratetype_bits mm/shuffle: remove dynamic reconfiguration mm/memory_hotplug: document why shuffle_zone() is relevant mm/page_alloc: remove nr_free_pagecache_pages() mm: remove vm_total_pages ...

mm, treewide: rename kzfree() to kfree_sensitive()

2020-08-07T18:33:22Z

As said by Linus: A symmetric naming is only helpful if it implies symmetries in use. Otherwise it's actively misleading. In "kzalloc()", the z is meaningful and an important part of what the caller wants. In "kzfree()", the z is actively detrimental, because maybe in the future we really _might_ want to use that "memfill(0xdeadbeef)" or something. The "zero" part of the interface isn't even _relevant_. The main reason that kzfree() exists is to clear sensitive information that should not be leaked to other future users of the same memory objects. Rename kzfree() to kfree_sensitive() to follow the example of the recently added kvfree_sensitive() and make the intention of the API more explicit. In addition, memzero_explicit() is used to clear the memory to make sure that it won't get optimized away by the compiler. The renaming is done by using the command sequence: git grep -w --name-only kzfree |\ xargs sed -i 's/kzfree/kfree_sensitive/' followed by some editing of the kfree_sensitive() kerneldoc and adding a kzfree backward compatibility macro in slab.h. [akpm@linux-foundation.org: fs/crypto/inline_crypt.c needs linux/slab.h] [akpm@linux-foundation.org: fix fs/crypto/inline_crypt.c some more] Suggested-by: Joe Perches Signed-off-by: Waiman Long Signed-off-by: Andrew Morton Acked-by: David Howells Acked-by: Michal Hocko Acked-by: Johannes Weiner Cc: Jarkko Sakkinen Cc: James Morris Cc: "Serge E. Hallyn" Cc: Joe Perches Cc: Matthew Wilcox Cc: David Rientjes Cc: Dan Carpenter Cc: "Jason A . Donenfeld" Link: http://lkml.kernel.org/r/20200616154311.12314-3-longman@redhat.com Signed-off-by: Linus Torvalds

scsi: target: Make iscsit_register_transport() return void

2020-08-05T00:56:56Z

This function always returns 0. We can make it return void to simplify the code. Also, no caller ever checks the return value of this function. Link: https://lore.kernel.org/r/20200803150008.83920-1-maxg@mellanox.com Signed-off-by: Max Gurtovoy Signed-off-by: Martin K. Petersen

scsi: target: iscsi: Fix inconsistent debug message

2020-07-29T02:15:31Z

Commit 25cdda95fda7 ("iscsi-target: Fix initial login PDU asynchronous socket close OOPs") changed the return value of __iscsi_target_sk_check_close(). However, pr_debug is still printing FALSE when returning TRUE which is a little confusing. Link: https://lore.kernel.org/r/20200716100212.4237-3-houpu@bytedance.com Reviewed-by: Mike Christie Signed-off-by: Hou Pu Signed-off-by: Martin K. Petersen

scsi: target: iscsi: Fix login error when receiving

2020-07-29T02:15:30Z

iscsi_target_sk_data_ready() could be invoked indirectly by iscsi_target_do_login_rx() from the workqueue like this: iscsi_target_do_login_rx() iscsi_target_do_login() iscsi_target_do_tx_login_io() iscsit_put_login_tx() iscsi_login_tx_data() tx_data() sock_sendmsg_nosec() tcp_sendmsg() release_sock() sk_backlog_rcv() tcp_v4_do_rcv() tcp_data_ready() iscsi_target_sk_data_ready() At that time LOGIN_FLAGS_READ_ACTIVE is not cleared and iscsi_target_sk_data_ready will not read data from the socket. Some iscsi initiators (libiscsi) will wait forever for a reply. LOGIN_FLAGS_READ_ACTIVE should be cleared early just after doing the receive and before writing to the socket in iscsi_target_do_login_rx. Unfortunately, LOGIN_FLAGS_READ_ACTIVE is also used by sk_state_change to do login cleanup if a socket was closed at login time. It is supposed to be cleared after the login PDU is successfully processed and replied. Introduce another flag, LOGIN_FLAGS_WRITE_ACTIVE, to cover the transmit part. Link: https://lore.kernel.org/r/20200716100212.4237-2-houpu@bytedance.com Reviewed-by: Mike Christie Signed-off-by: Hou Pu Signed-off-by: Martin K. Petersen