user/sven/linux.git/drivers/target, branch v4.8.6

Revert "target: Fix residual overflow handling in target_complete_cmd_with_length"

2016-10-28T07:45:31Z

commit 61f36166c245e563c7a2b624f4c78c5ce0f680d6 upstream. This reverts commit c1ccbfe0311e2380a6d2dcb0714b36904f5d586f. Reverting this patch, as it incorrectly assumes the additional length for INQUIRY in target_complete_cmd_with_length() is SCSI allocation length, which breaks existing user-space code when SCSI allocation length is smaller than additional length. root@scsi-mq:~# sg_inq --len=4 -vvvv /dev/sdb found bsg_major=253 open /dev/sdb with flags=0x800 inquiry cdb: 12 00 00 00 04 00 duration=0 ms inquiry: pass-through requested 4 bytes (data-in) but got -28 bytes inquiry: pass-through can't get negative bytes, say it got none inquiry: got too few bytes (0) INQUIRY resid (32) should never exceed requested len=4 inquiry: failed requesting 4 byte response: Malformed response to SCSI command [resid=32] AFAICT the original change was not to address a specific host issue, so go ahead and revert to original logic for now. Cc: Douglas Gilbert Cc: Martin K. Petersen Cc: Sumit Rai Signed-off-by: Nicholas Bellinger Signed-off-by: Greg Kroah-Hartman

target: Don't override EXTENDED_COPY xcopy_pt_cmd SCSI status code

2016-10-28T07:45:31Z

commit 926317de33998c112c5510301868ea9aa34097e2 upstream. This patch addresses a bug where a local EXTENDED_COPY WRITE or READ backend I/O request would always return SAM_STAT_CHECK_CONDITION, even if underlying xcopy_pt_cmd->se_cmd generated a different SCSI status code. ESX host environments expect to hit SAM_STAT_RESERVATION_CONFLICT for certain scenarios, and SAM_STAT_CHECK_CONDITION results in non-retriable status for these cases. Tested on v4.1.y with ESX v5.5u2+ with local IBLOCK backend copy. Reported-by: Nixon Vincent Tested-by: Nixon Vincent Cc: Nixon Vincent Tested-by: Dinesh Israni Signed-off-by: Dinesh Israni Cc: Dinesh Israni Signed-off-by: Nicholas Bellinger Signed-off-by: Greg Kroah-Hartman

target: Make EXTENDED_COPY 0xe4 failure return COPY TARGET DEVICE NOT REACHABLE

2016-10-28T07:45:31Z

commit 449a137846c84829a328757cd21fd9ca65c08519 upstream. This patch addresses a bug where EXTENDED_COPY across multiple LUNs results in a CHECK_CONDITION when the source + destination are not located on the same physical node. ESX Host environments expect sense COPY_ABORTED w/ COPY TARGET DEVICE NOT REACHABLE to be returned when this occurs, in order to signal fallback to local copy method. As described in section 6.3.3 of spc4r22: "If it is not possible to complete processing of a segment because the copy manager is unable to establish communications with a copy target device, because the copy target device does not respond to INQUIRY, or because the data returned in response to INQUIRY indicates an unsupported logical unit, then the EXTENDED COPY command shall be terminated with CHECK CONDITION status, with the sense key set to COPY ABORTED, and the additional sense code set to COPY TARGET DEVICE NOT REACHABLE." Tested on v4.1.y with ESX v5.5u2+ with BlockCopy across multiple nodes. Reported-by: Nixon Vincent Tested-by: Nixon Vincent Cc: Nixon Vincent Tested-by: Dinesh Israni Signed-off-by: Dinesh Israni Cc: Dinesh Israni Signed-off-by: Nicholas Bellinger Signed-off-by: Greg Kroah-Hartman

target: Re-add missing SCF_ACK_KREF assignment in v4.1.y

2016-10-28T07:45:31Z

commit 527268df31e57cf2b6d417198717c6d6afdb1e3e upstream. This patch fixes a regression in >= v4.1.y code where the original SCF_ACK_KREF assignment in target_get_sess_cmd() was dropped upstream in commit 054922bb, but the series for addressing TMR ABORT_TASK + LUN_RESET with fabric session reinstatement in commit febe562c20 still depends on this code in transport_cmd_finish_abort(). The regression manifests itself as a se_cmd->cmd_kref +1 leak, where ABORT_TASK + LUN_RESET can hang indefinately for a specific I_T session for drivers using SCF_ACK_KREF, resulting in hung kthreads. This patch has been verified with v4.1.y code. Reported-by: Vaibhav Tandon Tested-by: Vaibhav Tandon Cc: Vaibhav Tandon Signed-off-by: Nicholas Bellinger Signed-off-by: Greg Kroah-Hartman

target/tcm_fc: use CPU affinity for responses

2016-10-28T07:45:31Z

commit 1ba0158fa66b5b2c597a748f87be1650c9960ccc upstream. The libfc stack assigns exchange IDs based on the CPU the request was received on, so we need to send the responses via the same CPU. Otherwise the send logic gets confuses and responses will be delayed, causing exchange timeouts on the initiator side. Signed-off-by: Hannes Reinecke Signed-off-by: Nicholas Bellinger Signed-off-by: Greg Kroah-Hartman

target: iblock_execute_sync_cache() should use bio_set_op_attrs()

2016-08-07T20:41:02Z

The original commit missed this function, it needs to mark it a write flush. Cc: Mike Christie Fixes: e742fc32fcb4 ("target: use bio op accessors") Signed-off-by: Jens Axboe

Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending

2016-08-05T00:04:37Z

Pull SCSI target updates from Nicholas Bellinger: "The most notable item is IBM virtual SCSI target driver, that was originally ported to target-core back in 2010 by Tomo-san, and has been brought forward to v4.x code by Bryant Ly, Michael Cyr and co over the last months. Also included are two ORDERED task related bug-fixes Bryant + Michael found along the way using ibmvscsis with AIX guests, plus a few miscellaneous target-core + iscsi-target bug-fixes with associated stable tags" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target: fix spelling mistake: "limitiation" -> "limitation" target: Fix residual overflow handling in target_complete_cmd_with_length tcm_fc: set and unset FCP_SPPF_TARG_FCN iscsi-target: Fix panic when adding second TCP connection to iSCSI session ibmvscsis: Initial commit of IBM VSCSI Tgt Driver target: Fix ordered task CHECK_CONDITION early exception handling target: Fix ordered task target_setup_cmd_from_cdb exception hang target: Fix max_unmap_lba_count calc overflow target: Fix race between iscsi-target connection shutdown + ABORT_TASK target: Fix missing complete during ABORT_TASK + CMD_T_FABRIC_STOP

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

2016-07-27T19:03:20Z

Pull networking updates from David Miller: 1) Unified UDP encapsulation offload methods for drivers, from Alexander Duyck. 2) Make DSA binding more sane, from Andrew Lunn. 3) Support QCA9888 chips in ath10k, from Anilkumar Kolli. 4) Several workqueue usage cleanups, from Bhaktipriya Shridhar. 5) Add XDP (eXpress Data Path), essentially running BPF programs on RX packets as soon as the device sees them, with the option to mirror the packet on TX via the same interface. From Brenden Blanco and others. 6) Allow qdisc/class stats dumps to run lockless, from Eric Dumazet. 7) Add VLAN support to b53 and bcm_sf2, from Florian Fainelli. 8) Simplify netlink conntrack entry layout, from Florian Westphal. 9) Add ipv4 forwarding support to mlxsw spectrum driver, from Ido Schimmel, Yotam Gigi, and Jiri Pirko. 10) Add SKB array infrastructure and convert tun and macvtap over to it. From Michael S Tsirkin and Jason Wang. 11) Support qdisc packet injection in pktgen, from John Fastabend. 12) Add neighbour monitoring framework to TIPC, from Jon Paul Maloy. 13) Add NV congestion control support to TCP, from Lawrence Brakmo. 14) Add GSO support to SCTP, from Marcelo Ricardo Leitner. 15) Allow GRO and RPS to function on macsec devices, from Paolo Abeni. 16) Support MPLS over IPV4, from Simon Horman. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1622 commits) xgene: Fix build warning with ACPI disabled. be2net: perform temperature query in adapter regardless of its interface state l2tp: Correctly return -EBADF from pppol2tp_getname. net/mlx5_core/health: Remove deprecated create_singlethread_workqueue net: ipmr/ip6mr: update lastuse on entry change macsec: ensure rx_sa is set when validation is disabled tipc: dump monitor attributes tipc: add a function to get the bearer name tipc: get monitor threshold for the cluster tipc: make cluster size threshold for monitoring configurable tipc: introduce constants for tipc address validation net: neigh: disallow transition to NUD_STALE if lladdr is unchanged in neigh_update() MAINTAINERS: xgene: Add driver and documentation path Documentation: dtb: xgene: Add MDIO node dtb: xgene: Add MDIO node drivers: net: xgene: ethtool: Use phy_ethtool_gset and sset drivers: net: xgene: Use exported functions drivers: net: xgene: Enable MDIO driver drivers: net: xgene: Add backward compatibility drivers: net: phy: xgene: Add MDIO driver ...

libcxgb: export ppm release and tagmask set api

2016-07-25T17:31:09Z

Export cxgbi_ppm_release() to release ppod manager and cxgbi_tagmask_set() to set tag mask, they are used by cxgb3i, cxgb4i and cxgbit. Signed-off-by: Varun Prakash Reviewed-by: Steve Wise Signed-off-by: David S. Miller

libcxgb: add library module for Chelsio drivers

2016-07-25T17:31:08Z

Add common library module(libcxgb.ko) for Chelsio drivers to remove duplicate code. Code for iSCSI DDP Page Pod Manager is moved from cxgb4.ko to libcxgb.ko. Earlier only cxgbit.ko was using this code, now cxgb3i and cxgb4i will also use common Page Pod manager code. In future this module will have common connection management and hardware specific code that can be shared by multiple Chelsio drivers. Signed-off-by: Varun Prakash Reviewed-by: Steve Wise Signed-off-by: David S. Miller