user/sven/linux.git/drivers/target, branch v5.4.58

scsi: target: tcmu: Fix a use after free in tcmu_check_expired_queue_cmd()

2020-06-24T15:50:34Z

[ Upstream commit 9d7464b18892332e35ff37f0b024429a1a9835e6 ] The pr_debug() dereferences "cmd" after we already freed it by calling tcmu_free_cmd(cmd). The debug printk needs to be done earlier. Link: https://lore.kernel.org/r/20200523101129.GB98132@mwanda Fixes: 61fb24822166 ("scsi: target: tcmu: Userspace must not complete queued commands") Reviewed-by: Mike Christie Reviewed-by: David Disseldorp Signed-off-by: Dan Carpenter Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: target: tcmu: Userspace must not complete queued commands

2020-06-24T15:50:30Z

[ Upstream commit 61fb2482216679b9e1e797440c148bb143a5040a ] When tcmu queues a new command - no matter whether in command ring or in qfull_queue - a cmd_id from IDR udev->commands is assigned to the command. If userspace sends a wrong command completion containing the cmd_id of a command on the qfull_queue, tcmu_handle_completions() finds the command in the IDR and calls tcmu_handle_completion() for it. This might do some nasty things because commands in qfull_queue do not have a valid dbi list. To fix this bug, we no longer add queued commands to the idr. Instead the cmd_id is assign when a command is written to the command ring. Due to this change I had to adapt the source code at several places where up to now an idr_for_each had been done. [mkp: fix checkpatch warnings] Link: https://lore.kernel.org/r/20200518164833.12775-1-bstroesser@ts.fujitsu.com Acked-by: Mike Christie Signed-off-by: Bodo Stroesser Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: target: loopback: Fix READ with data and sensebytes

2020-06-24T15:50:25Z

[ Upstream commit c68a56736c129f5dd1632856956f9c3e04bae200 ] We use tcm_loop with tape emulations running on tcmu. In case application reads a short tape block with a longer READ, or a long tape block with a short READ, according to SCC spec data has to be tranferred _and_ sensebytes with ILI set and information field containing the residual count. Similar problem also exists when using fixed block size in READ. Up to now tcm_loop is not prepared to handle sensebytes if input data is provided, as in tcm_loop_queue_data_in() it only sets SAM_STAT_GOOD and, if necessary, the residual count. To fix the bug, the same handling for sensebytes as present in tcm_loop_queue_status() must be done in tcm_loop_queue_data_in() also. After adding this handling, the two function now are nearly identical, so I created a single function with two wrappers. Link: https://lore.kernel.org/r/20200428182617.32726-1-bstroesser@ts.fujitsu.com Signed-off-by: Bodo Stroesser Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: target: Put lun_ref at end of tmr processing

2020-05-27T15:46:40Z

commit f2e6b75f6ee82308ef7b00f29e71e5f1c6b3d52a upstream. Testing with Loopback I found that, after a Loopback LUN has executed a TMR, I can no longer unlink the LUN. The rm command hangs in transport_clear_lun_ref() at wait_for_completion(&lun->lun_shutdown_comp) The reason is, that transport_lun_remove_cmd() is not called at the end of target_tmr_work(). It seems, that in other fabrics this call happens implicitly when the fabric drivers call transport_generic_free_cmd() during their ->queue_tm_rsp(). Unfortunately Loopback seems to not comply to the common way of calling transport_generic_free_cmd() from ->queue_*(). Instead it calls transport_generic_free_cmd() from its ->check_stop_free() only. But the ->check_stop_free() is called by transport_cmd_check_stop_to_fabric() after it has reset the se_cmd->se_lun pointer. Therefore the following transport_generic_free_cmd() skips the transport_lun_remove_cmd(). So this patch re-adds the transport_lun_remove_cmd() at the end of target_tmr_work(), which was removed during commit 2c9fa49e100f ("scsi: target/core: Make ABORT and LUN RESET handling synchronous"). For fabrics using transport_generic_free_cmd() in the usual way the double call to transport_lun_remove_cmd() doesn't harm, as transport_lun_remove_cmd() checks for this situation and does not release lun_ref twice. Link: https://lore.kernel.org/r/20200513153443.3554-1-bstroesser@ts.fujitsu.com Fixes: 2c9fa49e100f ("scsi: target/core: Make ABORT and LUN RESET handling synchronous") Cc: stable@vger.kernel.org Tested-by: Bryant G. Ly Reviewed-by: Bart van Assche Signed-off-by: Bodo Stroesser Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

scsi: target/iblock: fix WRITE SAME zeroing

2020-05-06T06:15:14Z

commit 1d2ff149b263c9325875726a7804a0c75ef7112e upstream. SBC4 specifies that WRITE SAME requests with the UNMAP bit set to zero "shall perform the specified write operation to each LBA specified by the command". Commit 2237498f0b5c ("target/iblock: Convert WRITE_SAME to blkdev_issue_zeroout") modified the iblock backend to call blkdev_issue_zeroout() when handling WRITE SAME requests with UNMAP=0 and a zero data segment. The iblock blkdev_issue_zeroout() call incorrectly provides a flags parameter of 0 (bool false), instead of BLKDEV_ZERO_NOUNMAP. The bool false parameter reflects the blkdev_issue_zeroout() API prior to commit ee472d835c26 ("block: add a flags argument to (__)blkdev_issue_zeroout") which was merged shortly before 2237498f0b5c. Link: https://lore.kernel.org/r/20200419163109.11689-1-ddiss@suse.de Fixes: 2237498f0b5c ("target/iblock: Convert WRITE_SAME to blkdev_issue_zeroout") Reviewed-by: Bart Van Assche Signed-off-by: David Disseldorp Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

scsi: target: tcmu: reset_ring should reset TCMU_DEV_BIT_BROKEN

2020-05-02T06:48:56Z

[ Upstream commit 066f79a5fd6d1b9a5cc57b5cd445b3e4bb68a5b2 ] In case command ring buffer becomes inconsistent, tcmu sets device flag TCMU_DEV_BIT_BROKEN. If the bit is set, tcmu rejects new commands from LIO core with TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE, and no longer processes completions from the ring. The reset_ring attribute can be used to completely clean up the command ring, so after reset_ring the ring no longer is inconsistent. Therefore reset_ring also should reset bit TCMU_DEV_BIT_BROKEN to allow normal processing. Link: https://lore.kernel.org/r/20200409101026.17872-1-bstroesser@ts.fujitsu.com Acked-by: Mike Christie Signed-off-by: Bodo Stroesser Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: target: fix PR IN / READ FULL STATUS for FC

2020-05-02T06:48:56Z

[ Upstream commit 8fed04eb79a74cbf471dfaa755900a51b37273ab ] Creation of the response to READ FULL STATUS fails for FC based reservations. Reason is the too high loop limit (< 24) in fc_get_pr_transport_id(). The string representation of FC WWPN is 23 chars long only ("11:22:33:44:55:66:77:88"). So when i is 23, the loop body is executed a last time for the ending '\0' of the string and thus hex2bin() reports an error. Link: https://lore.kernel.org/r/20200408132610.14623-3-bstroesser@ts.fujitsu.com Signed-off-by: Bodo Stroesser Reviewed-by: Mike Christie Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: target: fix hang when multiple threads try to destroy the same iscsi session

2020-04-21T07:05:04Z

[ Upstream commit 57c46e9f33da530a2485fa01aa27b6d18c28c796 ] A number of hangs have been reported against the target driver; they are due to the fact that multiple threads may try to destroy the iscsi session at the same time. This may be reproduced for example when a "targetcli iscsi/iqn.../tpg1 disable" command is executed while a logout operation is underway. When this happens, two or more threads may end up sleeping and waiting for iscsit_close_connection() to execute "complete(session_wait_comp)". Only one of the threads will wake up and proceed to destroy the session structure, the remaining threads will hang forever. Note that if the blocked threads are somehow forced to wake up with complete_all(), they will try to free the same iscsi session structure destroyed by the first thread, causing double frees, memory corruptions etc... With this patch, the threads that want to destroy the iscsi session will increase the session refcount and will set the "session_close" flag to 1; then they wait for the driver to close the remaining active connections. When the last connection is closed, iscsit_close_connection() will wake up all the threads and will wait for the session's refcount to reach zero; when this happens, iscsit_close_connection() will destroy the session structure because no one is referencing it anymore. INFO: task targetcli:5971 blocked for more than 120 seconds. Tainted: P OE 4.15.0-72-generic #81~16.04.1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. targetcli D 0 5971 1 0x00000080 Call Trace: __schedule+0x3d6/0x8b0 ? vprintk_func+0x44/0xe0 schedule+0x36/0x80 schedule_timeout+0x1db/0x370 ? __dynamic_pr_debug+0x8a/0xb0 wait_for_completion+0xb4/0x140 ? wake_up_q+0x70/0x70 iscsit_free_session+0x13d/0x1a0 [iscsi_target_mod] iscsit_release_sessions_for_tpg+0x16b/0x1e0 [iscsi_target_mod] iscsit_tpg_disable_portal_group+0xca/0x1c0 [iscsi_target_mod] lio_target_tpg_enable_store+0x66/0xe0 [iscsi_target_mod] configfs_write_file+0xb9/0x120 __vfs_write+0x1b/0x40 vfs_write+0xb8/0x1b0 SyS_write+0x5c/0xe0 do_syscall_64+0x73/0x130 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Link: https://lore.kernel.org/r/20200313170656.9716-3-mlombard@redhat.com Reported-by: Matt Coleman Tested-by: Matt Coleman Tested-by: Rahul Kundu Signed-off-by: Maurizio Lombardi Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: target: remove boilerplate code

2020-04-21T07:05:04Z

[ Upstream commit e49a7d994379278d3353d7ffc7994672752fb0ad ] iscsit_free_session() is equivalent to iscsit_stop_session() followed by a call to iscsit_close_session(). Link: https://lore.kernel.org/r/20200313170656.9716-2-mlombard@redhat.com Tested-by: Rahul Kundu Signed-off-by: Maurizio Lombardi Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: Revert "target: iscsi: Wait for all commands to finish before freeing a session"

2020-02-28T16:22:25Z

commit 807b9515b7d044cf77df31f1af9d842a76ecd5cb upstream. Since commit e9d3009cb936 introduced a regression and since the fix for that regression was not perfect, revert this commit. Link: https://marc.info/?l=target-devel&m=158157054906195 Cc: Rahul Kundu Cc: Mike Marciniszyn Cc: Sagi Grimberg Reported-by: Dakshaja Uppalapati Fixes: e9d3009cb936 ("scsi: target: iscsi: Wait for all commands to finish before freeing a session") Signed-off-by: Bart Van Assche Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman