user/sven/linux.git/drivers/tty/serdev/core.c, branch v4.19.148

serdev: Don't claim unsupported ACPI serial devices

2020-01-14T19:07:05Z

commit c5ee0b3104e0b292d353e63fd31cb8c692645d8c upstream. Serdev sub-system claims all ACPI serial devices that are not already initialised. As a result, no device node is created for serial ports on certain boards such as the Apollo Lake based UP2. This has the unintended consequence of not being able to raise the login prompt via serial connection. Introduce a blacklist to reject ACPI serial devices that should not be claimed by serdev sub-system. Add the peripheral ids for Intel HS UART to the blacklist to bring back serial port on SoCs carrying them. Cc: stable@vger.kernel.org Signed-off-by: Punit Agrawal Acked-by: Hans de Goede Acked-by: Johan Hovold Cc: Rob Herring Link: https://lore.kernel.org/r/20191219100345.911093-1-punit1.agrawal@toshiba.co.jp Signed-off-by: Greg Kroah-Hartman

serdev: add dev_pm_domain_attach|detach()

2018-07-15T10:23:53Z

In order to open up the required power gate before any operation can be effectively performed over the serial bus between CPU and serdev, it's clearly essential to add common attach functions for PM domains to serdev at the probe phase. Similarly, the relevant dettach function for the PM domains should be properly and reversely added at the remove phase. Signed-off-by: Sean Wang Reviewed-by: Ulf Hansson Reviewed-by: Johan Hovold Cc: Rob Herring Cc: Ulf Hansson Cc: Jiri Slaby Cc: linux-serial@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

Merge 4.18-rc3 into tty-next

2018-07-02T06:23:43Z

We want ths tty core changes in here as well. Signed-off-by: Greg Kroah-Hartman

serdev: fix memleak on module unload

2018-06-28T12:34:39Z

Make sure to free all resources associated with the ida on module exit. Fixes: cd6484e1830b ("serdev: Introduce new bus for serial attached devices") Cc: stable # 4.11 Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

serdev: add controller runtime PM support

2018-06-28T12:07:54Z

Add support for controller runtime power management to serdev core. This is needed to allow slave drivers to manage the runtime PM state of the underlying serial controller when its driver, in turn, implements more aggressive runtime power management (e.g. using autosuspend). For some applications, for example, where loss off initial data after a remote-wakeup event is acceptable or where rx is not used at all, aggressive serial controller runtime PM may be used without further involvement of the slave driver. But when this is not the case, the slave driver must be able to indicate when incoming data is expected in order to avoid data loss. To facilitate the common case, where the serial controller power state is active whenever the port is open (which is the case with just about every serial driver), and where data loss is not acceptable and cannot even be prevented by explicit controller runtime power management, an RPM reference is taken in serdev open and put again at close. This reference can later be balanced by any serdev driver which wants and/or can handle aggressive controller runtime PM. Note that the .ignore_children flag is set for the serdev controller to allow the underlying hardware to idle when no I/O is expected, regardless of the slave device RPM state. Acked-by: Tony Lindgren Reviewed-by: Sebastian Reichel Signed-off-by: Johan Hovold Acked-by: Rob Herring Signed-off-by: Greg Kroah-Hartman

serdev: Fix typo in serdev_device_alloc

2018-03-14T14:02:45Z

Fix function name in serdev_device_alloc() definition Signed-off-by: Frédéric Danis Signed-off-by: Greg Kroah-Hartman

Merge tag 'tty-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2018-02-01T17:46:00Z

Pull tty/staging driver updates from Greg KH: "Here is the big tty/serial driver update for 4.16-rc1. The usual number of various serial driver fixes and updates to try to get them to work with crazy hardware configurations (seriously, how many different ways are hardware engineers going to come up with to hook up a simple UART?) There is also some serdev bugfixes and updates, as well as a smattering of other small fixes in here. All have been in the linux-next tree for a while, with no reported issues" * tag 'tty-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (65 commits) tty: serial: exar: Relocate sleep wake-up handling tty: fix data race between tty_init_dev and flush of buf serial: imx: fix endless loop during suspend serial: core: mark port as initialized after successful IRQ change serdev: only match serdev devices serdev: do not generate modaliases for controllers serial: mxs-auart: don't use GPIOF_* with gpiod_get_direction serial: 8250_dw: Revert "Improve clock rate setting" MAINTAINERS: Add myself as designated reviewer for 8250_dw gpio: serial: max310x: Support open-drain configuration for GPIOs serdev: Fix serdev_uevent failure on ACPI enumerated serdev-controllers serial: 8250_ingenic: Parse earlycon options serial: 8250_ingenic: Add support for the JZ4770 SoC serial: core: Make uart_parse_options take const char* argument serial: 8250_of: fix return code when probe function fails to get reset serial: imx: Only wakeup via RTSDEN bit if the system has RTS/CTS serial: 8250_uniphier: fix error return code in uniphier_uart_probe() tty: n_gsm: Allow ADM response in addition to UA for control dlci tty: omap-serial: Fix initial on-boot RTS GPIO level tty: serial: jsm: Add one check against NULL pointer dereference ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

2018-01-31T22:31:10Z

Pull networking updates from David Miller: 1) Significantly shrink the core networking routing structures. Result of http://vger.kernel.org/~davem/seoul2017_netdev_keynote.pdf 2) Add netdevsim driver for testing various offloads, from Jakub Kicinski. 3) Support cross-chip FDB operations in DSA, from Vivien Didelot. 4) Add a 2nd listener hash table for TCP, similar to what was done for UDP. From Martin KaFai Lau. 5) Add eBPF based queue selection to tun, from Jason Wang. 6) Lockless qdisc support, from John Fastabend. 7) SCTP stream interleave support, from Xin Long. 8) Smoother TCP receive autotuning, from Eric Dumazet. 9) Lots of erspan tunneling enhancements, from William Tu. 10) Add true function call support to BPF, from Alexei Starovoitov. 11) Add explicit support for GRO HW offloading, from Michael Chan. 12) Support extack generation in more netlink subsystems. From Alexander Aring, Quentin Monnet, and Jakub Kicinski. 13) Add 1000BaseX, flow control, and EEE support to mvneta driver. From Russell King. 14) Add flow table abstraction to netfilter, from Pablo Neira Ayuso. 15) Many improvements and simplifications to the NFP driver bpf JIT, from Jakub Kicinski. 16) Support for ipv6 non-equal cost multipath routing, from Ido Schimmel. 17) Add resource abstration to devlink, from Arkadi Sharshevsky. 18) Packet scheduler classifier shared filter block support, from Jiri Pirko. 19) Avoid locking in act_csum, from Davide Caratti. 20) devinet_ioctl() simplifications from Al viro. 21) More TCP bpf improvements from Lawrence Brakmo. 22) Add support for onlink ipv6 route flag, similar to ipv4, from David Ahern. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1925 commits) tls: Add support for encryption using async offload accelerator ip6mr: fix stale iterator net/sched: kconfig: Remove blank help texts openvswitch: meter: Use 64-bit arithmetic instead of 32-bit tcp_nv: fix potential integer overflow in tcpnv_acked r8169: fix RTL8168EP take too long to complete driver initialization. qmi_wwan: Add support for Quectel EP06 rtnetlink: enable IFLA_IF_NETNSID for RTM_NEWLINK ipmr: Fix ptrdiff_t print formatting ibmvnic: Wait for device response when changing MAC qlcnic: fix deadlock bug tcp: release sk_frag.page in tcp_disconnect ipv4: Get the address of interface correctly. net_sched: gen_estimator: fix lockdep splat net: macb: Handle HRESP error net/mlx5e: IPoIB, Fix copy-paste bug in flow steering refactoring ipv6: addrconf: break critical section in addrconf_verify_rtnl() ipv6: change route cache aging logic i40e/i40evf: Update DESC_NEEDED value to reflect larger value bnxt_en: cleanup DIM work on device shutdown ...

serdev: add method to set parity

2018-01-23T08:16:05Z

Adds serdev_device_set_parity() and an implementation for ttyport. The interface uses an enum with the values SERIAL_PARITY_NONE, SERIAL_PARITY_EVEN and SERIAL_PARITY_ODD. Signed-off-by: Ulrich Hecht Reviewed-by: Sebastian Reichel Reviewed-by: Johan Hovold Acked-by: Greg Kroah-Hartman Signed-off-by: Marcel Holtmann

serdev: only match serdev devices

2018-01-22T13:19:10Z

Only serdev devices (a.k.a. clients or slaves) are bound to drivers so bail out early from match() in case the device is not a serdev device (i.e. if it's a serdev controller). Signed-off-by: Johan Hovold Reviewed-by: Sebastian Reichel Signed-off-by: Greg Kroah-Hartman