user/sven/linux.git/drivers/tty/serial, branch v5.7

tty: serial: add missing spin_lock_init for SiFive serial console

2020-05-15T12:55:10Z

An uninitialised spin lock for sifive serial console raises a bad magic spin_lock error as reported and discussed here [1]. Initialising the spin lock resolves the issue. The fix is tested on HiFive Unleashed A00 board with Linux 5.7-rc4 and OpenSBI v0.7 [1] https://lore.kernel.org/linux-riscv/b9fe49483a903f404e7acc15a6efbef756db28ae.camel@wdc.com Fixes: 45c054d0815b ("tty: serial: add driver for the SiFive UART") Reported-by: Atish Patra Signed-off-by: Sagar Shrikant Kadam Reviewed-by: Palmer Dabbelt Acked-by: Palmer Dabbelt Cc: stable Link: https://lore.kernel.org/r/1589019852-21505-2-git-send-email-sagar.kadam@sifive.com Signed-off-by: Greg Kroah-Hartman

Merge tag 'tty-5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2020-05-08T15:56:16Z

Pull tty/serial fixes from Greg KH: "Here are three small TTY/Serial/VT fixes for 5.7-rc5: - revert for the bcm63xx driver "fix" that was incorrect - vt unicode console bugfix - xilinx_uartps console driver fix All of these have been in linux next with no reported issues" * tag 'tty-5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: xilinx_uartps: Fix missing id assignment to the console vt: fix unicode console freeing with a common interface Revert "tty: serial: bcm63xx: fix missing clk_put() in bcm63xx_uart"

tty: xilinx_uartps: Fix missing id assignment to the console

2020-05-04T16:55:45Z

When serial console has been assigned to ttyPS1 (which is serial1 alias) console index is not updated property and pointing to index -1 (statically initialized) which ends up in situation where nothing has been printed on the port. The commit 18cc7ac8a28e ("Revert "serial: uartps: Register own uart console and driver structures"") didn't contain this line which was removed by accident. Fixes: 18cc7ac8a28e ("Revert "serial: uartps: Register own uart console and driver structures"") Signed-off-by: Shubhrajyoti Datta Cc: stable Signed-off-by: Michal Simek Link: https://lore.kernel.org/r/ed3111533ef5bd342ee5ec504812240b870f0853.1588602446.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman

Revert "tty: serial: bcm63xx: fix missing clk_put() in bcm63xx_uart"

2020-05-04T09:49:57Z

This reverts commit 580d952e44de5509c69c8f9346180ecaa78ebeec ("tty: serial: bcm63xx: fix missing clk_put() in bcm63xx_uart") because we should not be doing a clk_put() if we were not successful in getting a valid clock reference via clk_get() in the first place. Fixes: 580d952e44de ("tty: serial: bcm63xx: fix missing clk_put() in bcm63xx_uart") Signed-off-by: Florian Fainelli Cc: stable Link: https://lore.kernel.org/r/20200501013904.1394-1-f.fainelli@gmail.com Signed-off-by: Greg Kroah-Hartman

Merge tag 'riscv-for-linus-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

2020-04-29T16:25:32Z

Pull RISC-V fixes from Palmer Dabbelt: "A handful of fixes. Specifically: - fix linker argument to allow linking with lld - build fix for configurations without a frame pointer - a handful of build fixes related the SBI 0.1 vs 0.2 split - remove STRICT_KERNEL_RWX for !MMU, which isn't useful" * tag 'riscv-for-linus-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: select ARCH_HAS_STRICT_KERNEL_RWX only if MMU riscv: sbi: Fix undefined reference to sbi_shutdown tty: riscv: Using RISCV_SBI_V01 instead of RISCV_SBI riscv: sbi: Correct sbi_shutdown() and sbi_clear_ipi() export riscv: fix vdso build with lld RISC-V: stacktrace: Declare sp_in_global outside ifdef

tty: serial: bcm63xx: fix missing clk_put() in bcm63xx_uart

2020-04-23T13:48:53Z

This patch fixes below error reported by coccicheck drivers/tty/serial/bcm63xx_uart.c:848:2-8: ERROR: missing clk_put; clk_get on line 842 and execution via conditional on line 846 Fixes: ab4382d27412 ("tty: move drivers/serial/ to drivers/tty/serial/") Reported-by: Hulk Robot Signed-off-by: Zou Wei Cc: stable Link: https://lore.kernel.org/r/1587472306-105155-1-git-send-email-zou_wei@huawei.com Signed-off-by: Greg Kroah-Hartman

tty: serial: owl: add "much needed" clk_prepare_enable()

2020-04-23T13:46:30Z

commit 8ba92cf59335 ("arm64: dts: actions: s700: Add Clock Management Unit") breaks the UART on Cubieboard7-lite (based on S700 SoC), This is due to the fact that generic clk routine clk_disable_unused() disables the gate clks, and that in turns disables OWL UART (but UART driver never enables it). To prove this theory, Andre suggested to use "clk_ignore_unused" in kernel commnd line and it worked (Kernel happily lands into RAMFS world :)). This commit fix this up by adding clk_prepare_enable(). Fixes: 8ba92cf59335 ("arm64: dts: actions: s700: Add Clock Management Unit") Signed-off-by: Amit Singh Tomar Cc: stable Link: https://lore.kernel.org/r/1587067917-1400-1-git-send-email-amittomer25@gmail.com Signed-off-by: Greg Kroah-Hartman

tty: riscv: Using RISCV_SBI_V01 instead of RISCV_SBI

2020-04-21T23:15:04Z

As shown in SBI v0.2, the legacy console SBI functions (sbi_console_getchar() and sbi_console_putchar()) are expected to be deprecated; they have no replacement. Let's HVC_RISCV_SBI and SERIAL_EARLYCON_RISCV_SBI depends on RISCV_SBI_V01. Fixes: efca13989250 ("RISC-V: Introduce a new config for SBI v0.1") Signed-off-by: Kefeng Wang Reviewed-by: Anup Patel Signed-off-by: Palmer Dabbelt

serial: sh-sci: Make sure status register SCxSR is read in correct sequence

2020-04-16T14:16:52Z

For SCIF and HSCIF interfaces the SCxSR register holds the status of data that is to be read next from SCxRDR register, But where as for SCIFA and SCIFB interfaces SCxSR register holds status of data that is previously read from SCxRDR register. This patch makes sure the status register is read depending on the port types so that errors are caught accordingly. Cc: Signed-off-by: Kazuhiro Fujita Signed-off-by: Hao Bui Signed-off-by: KAZUMI HARADA Signed-off-by: Lad Prabhakar Tested-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/1585333048-31828-1-git-send-email-kazuhiro.fujita.jg@renesas.com Signed-off-by: Greg Kroah-Hartman

serial: sunhv: Initialize lock for non-registered console

2020-04-16T14:16:52Z

The commit a3cb39d258ef ("serial: core: Allow detach and attach serial device for console") changed a bit logic behind lock initialization since for most of the console driver it's supposed to have lock already initialized even if console is not enabled. However, it's not the case for Sparc HV console. Initialize lock explicitly in the ->probe(). Note, there is still an open question should or shouldn't not this driver register console properly. Fixes: a3cb39d258ef ("serial: core: Allow detach and attach serial device for console") Reported-by: Anatoly Pugachev Cc: David Miller Signed-off-by: Andy Shevchenko Tested-by: Anatoly Pugachev Link: https://lore.kernel.org/r/20200402172026.79478-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman